MCH Instruments Co.,Ltd.
MCH specializes in manufacturing up to hundred models of measuring instruments, such as Oscilloscope, Spectrum Analyzer, Function Generator, Frequency Counter, Millivoltmeter, DC Power Supply and so on.
- 86-755-83281201
- Room 28P, Block B, Modern Window
Huangqiang Road North,
Shenzhen, GD 518031
China
-
Product
200-480 Degree SolderingStation
SM-936D
-
*Temperature range 200-400C.*Ceramic heating element and sensor insures rapid heat-up temperature.*Celsius temperature setting. *4 digit LED display.*Digitalized temperature adjustment.*Wide selection of tips available.
-
Product
100KHz LCR Meter
MCH-2817
-
Is a high accuracy, wide measuring range impedance tester. With test frequency upto 100kHz, three test signal levels and capacity of measuring parameters such as Resistance(R), Capacitance(C), Inductance(L) and etc. It's equipped with a 240 × 128 dot , back-lighted LCD display which provides user friendly interface for measurement and operation.
-
Product
Soldering Stations
SM-878AD
-
*Module: 878AD*Display: LED*Power Rating:700W *Air Flow: 120L/Mints*Temperature: 100-450DEGREE*Noisy: <45dB
-
Product
1mV-300V / 2 CH. Milli-Voltmeter
Digital MVT-172D
-
Is applicable to measure RMS value of sine wave with frequency range 5Hz~2Mz and voltage range 100μV~300V. This instrument has a 4 digit display with high precision, small frequency effected errors and high input impedance. There are three display ways including voltage, dB and dBm, supplying a clear and intuitive display. Auto measuring range switching makes your usage more convenient. All switches are touch switches with high quality, providing good hand feeling and high reliability.
-
Product
Switching DC Power Supply
-
Features:-Handiness, beautiful, stabilization, high performance, low cost-High Stability digital display DC power supply-A full functional output protection function-Can be continuos output full load-Current/ voltage adjustable within the nominal value
-
Product
Audio Frequency Sweep Generator
-
Feature:*Auto and manual operation selectable*Ouput power:20W.40W.60W.100W.200W*Sweep time selection*5 digit LED display for frequency 4 digit display for voltage amplitude observation of synchronous output*Power supply:AC 220V(110V Optional)
-
Product
1050MHz Spectrum Analyzer
SM-5010
-
Is used for the early test in the development of electrical products, troubleshooting of CATV/MATV system as well as the test and trouble diagnosis of cellular phone system. Combined with the near field probes of Mz530, it can detect the missing fields of radio frequency
-
Product
Digital Signal Generator
-
Digital Signal Generator*signal frequency:0.1Hz~2MHz, continuously variableave from: square, sine*output attenuator: 0dB,, 20dB, 40dB, 60dB*output level: 20Vp-p in open circuit, not less than 10Vp-p with 50Ω load*rising and falling edge of square not more than 35ns,*sine distortion less than 1%, amplitude –frequency characteristic : ±0.5dB within 100KHz, ±1dB above 1MHz*frequency meter: 10Hz~30MHz*power supply : AC 220V(110V optional)
-
Product
200-480 degree Soldering Station
SM-936B
-
* Temperature range 200C-600C (392F-896F).* Ceramic heating element and sensor insures rapid heat-uptemperature.* Celsius or Farenheit temperature setting.* Temmperature adjusted by simply turning the dial.* Wide selection of tips available.
-
Product
RF Milli-Voltmeter 100Hz-100MHz
HFJ-8AD
-
FEATURESSmall size probe provides convenient measurement on devices in miniature. And its detachable design reduces your work in servicing. Large scale LCD display offers an easy observation. Tact-switches are used for longer duration. More over.
-
Product
0.1Hz-2MHz AM/FM Functional Generator
MFG-8202
-
Features:• Low distortion, high stability• Linear and logarithmic sweep function• Sweep time and width adjustable• External Voltage Control Frequency (VCF)• Internal & external modulation (AM/FM) with modulation control• Output signal compatible with TTL/CMOS• Seven types of waveforms such as sine, square, triangle and ramp• 5W power output (ONLY for model no with “B”)• DC offset and 40bD attenuation can be applied to main output signal• Built-in frequency meter 0.1Hz~30MHz
-
Product
AC DC Power Supply
-
Features:1. AC/DC power supply is an adjustable Intelligent Multi-channels power supply2. AC/DC voltage output: 1.5 V- 3 V- 6 V - 9 V -12 V, Maximum Current: 5A3. Overall output protection function4. Allow full load continuous output5. Over-voltage over-current intelligent protection, stable, reliable and durable
-
Product
Signal Generator
SG-4162AD
-
Features:*Signal generator frequency range 100kHz~150MHz*8 digit LED display for Internal and External frequency*Built-in frequency meter, measuring external signal range 10Hz~150MHz*Internal and External modulation*Sine, Square waveform output, and amplitude adjustable
-
Product
120MHz DDS Function Generator
SM-4120
-
*High resolution, high accuracy, high stability, superb price/performance.*High visible VFD display, easy-to-use knob and keys.*Multi-wave forms are suitable for various application areas.*Wide sweep frequency range, start and stop frequency can be set independantly in sweep function. It can be used as digital sweep analyzer with an oscilloscope.*SMT craft. New-style metal case.*MTBF: >1000h
-
Product
10Hz-150KHz Frequency Counter
HCF-F1000L
-
FEATURE:*Period,totalize measurement self test*High sensitioity:85dBV (25mVrms)*Stability:±3x10-9/s*8 digit LED display*Gate Time:0.01s,0.1s,1s*Power supply:AC 220V(110V optional)
