Keysight Technologies
Keysight empowers innovators to explore, design, and bring world-changing technologies to life. As the industry’s premier global innovation partner, Keysight’s software-centric solutions serve engineers across the design and development environment, enabling them to deliver tomorrow’s breakthroughs at speed and with reduced risk. Keysight leverages its strength as the world’s leading test and measurement provider and today enables innovators to push the boundaries of engineering by quickly solving design, emulation, and test challenges to help create the best product experiences.
- 1 800 829-4444
- 1 800 829-4433
- usa_orders@keysight.com
- 1900 Garden of the Gods Road
Colorado Springs, CO 80907-3423
United States of America
Categories
-
product
PLTS N-Port Measurement And Analysis
N19307B
PLTS N19307B extends the N19301B base product to perform N-port (greater than 4 ports) measurements and analysis
-
product
RF Electronic Calibration Module (ECal), DC/300 KHz To 7.5 GHz, 7-16, 2 Port
85098D
The Keysight 85098D RF electronic calibration (ECal) module makes the calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full two-port calibration takes less than half the time and a number of connections using ECal versus mechanical calibration kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
-
product
Laser Head
5517FL
The Keysight 5517FL is used primarily in VME and PC based laser interferometer systems where the velocity of motion is faster, such as semiconductor lithography and flat panel applications. Please contact Keysight for custom requirements.
-
product
Sensor Cable, 5 M
E1739A
The E1739A 5-meter (16 feet) Sensor Cable is used to connect the E1736A USB Sensor Hub to either the E1737A Material Temperature Sensor or the E1738A Air Sensor. The connectors at either end of a sensor cable are identical. It is part of the 5530 Laser Calibration System.
-
product
Blocking Capacitor, 0.045 to 26.5 GHz
11742A
The Keysight 11742A blocking capacitor blocks dc signals below 45 MHz and passes signals up to 26.5 GHz. Ideal for use with high-frequency oscilloscopes or in biased microwave circuits, the Keysight 11742A will suppress low frequency signals that can damage expensive measuring equipment or affect the accuracy of your RF and microwave measurements.
-
product
Scienlab Measurement And Control Module
SL1068B
The Measurement & Control Module SL1068B is a rack-mount measurement module which provides voltage outputs for analog signaling – useful e.g. for the emulation of temperature sensors or the controlling of regulation vents with voltage input with 8 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.
-
product
Terminal Block For 34932A Matrix
34932T
Provides a flexible method for connecting discrete external wiring; detachable with screw-type connections.
-
product
FieldFox C Handheld Microwave Spectrum Analyzer, 10 GHz
N9935C
Capture elusive signals with up to 120 MHz gap-free, real-time bandwidth.Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup.Perform over-the-air measurements for 5G NR and LTE.Use GPS/GNSS for geolocation and timestamping.Carry one lightweight unit at 3.4 kg (7.4 lb).What's included:Base model: spectrum analyzer (SA)AC/DC adapterLocalized power cordRechargeable Li-ion batterySoft carrying case with backpack and shoulder straps
-
product
PIN Solid State Switch, 100 MHz to 18 GHz, SP4T
P9404C
The Keysight P9404C PIN solid state switch maximizes your operating frequency range from 100 MHz to 18 GHz. Providing superior performance in terms of isolation, insertion loss and return loss, the P9404C is particularly suitable for high-speed RF and microwave switching applications such as switch matrixes in instrumentation, communications and radar. These switches provide ultra-fast switching speed to increase throughput in manufacturing.
-
product
Adjustable Mount
10710A
The Keysight 10710A adjustable optics mount makes alignment faster and easier. It is a convenient accessory for the Keysight 10700A and 10701A beam splitters, the 10705A interferometer, and the 10707A beam bender. It allows for 8 degrees tilt and yaw adjustments.
-
product
65 GHz Single Channel Optical Module
N1030A
The N1030A is a plug-in module for the DCA-X mainframe that can be configured with one 65 GHz optical channel, or one 65 GHz optical and one 95 GHz electrical channel.
-
product
Digital Interconnect Test System, Reference Solution
When you need to measure advanced S-parameters with a fast, low-cost and easy-to-use test solution, the Digital Interconnect Test System gives you a significant edge. It provides a full 32-port vector network analyzer (VNA) configured within a single PXI chassis – ideal for high-speed cable testing. And lets you test any linear passive interconnect faster and easier, including backplanes, connectors and PCBs. Sharpen your edge with Keysight’s Digital Interconnect Test System that enables signal integrity characterization of multiport interconnect products.
-
product
Reference Transmitter
81492A
Keysight's 81492A Reference Transmitter is designed to offer excellent eye quality for NRZ and PAM4 signals at baud-rates up to 56 Gbaud and can serve as universal single-mode E/O converter. In addition to the internal lasers at 1310 & 1550 nm, an external optical input for usage with tunable laser sources is available. It is fully integrated into Keysight’s Optical Receiver Stress Test solutions to address test requirements of IEEE 802.3 10,40,100 and 400GBASE optical standards.
-
product
FieldFox C Handheld RF Analyzer, 4 GHz
N9913C
Capture elusive signals with up to 120 MHz gap-free, real-time bandwidth. Measure all four S-parameters simultaneously with 115 dB dynamic range. Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup. Perform over-the-air measurements for 5G NR and LTE. Use GPS/GNSS for geolocation and timestamping.
-
product
Network Analyzer Software
Network analyzer software tools enable you to investigate, characterize, and troubleshoot your designs in a variety of measurement applications. Software applications are available for PNA-X, PNA-L, PNA and ENA series network analyzers.
Children
-
TDK RF Solutions Inc.
TDK RF Solutions Inc., belonging to TDK Corporation’s EMC & RF Engineering Business Division, was established in Cedar Park, Texas in 1987 and acquired by TDK in 1998. TDK RF Solutions is a world leader in the design, development, and manufacture of technical solutions for the electromagnetic compatibility testing and antenna measurement industries. We offer a complete range of solutions including automated test systems, TDK anechoic chambers, RF absorbers, antennas, software, and a wide range of test products.
Children
-
Children
-
Keysight Network Applications and Security
A leading provider of performance test systems for IP-based infrastructure and services. Ixia's test systems are used by Network and Telephony Equipment Manufacturers, Semiconductor Manufacturers, Service Providers, Governments, and Enterprises to validate the functionality and reliability of complex IP networks, devices, and applications. Ixia's Triple Play test systems address the growing need to test voice, video, and data services and network capability under real-world conditions.
Children
-
PRISMA Telecom Testing Srl
Since 1986, PRISMA Engineering leads multi-user, scalable load&stress test and monitoring solutions for mobile networks. The largest wireless network equipment Manufacturers and Service Providers worldwide depend on complete testing solutions that PRISMA provides and maintains. Our engineering team provides extensive experience in all areas of hardware and software design, with telecommunication expertise ranging from GSM/GPRS/EDGE, UMTS and WiMAX standards, to LTE and more. Recently added testing solutions based on Software Defined Radio have expanded the scope of PRISMA’s solutions to the entire range of interfaces used in mobile networks, especially for Evolved EDGE and LTE radio systems.
Children
-
eggPlant
Here at eggplant, our focus is to provide test automation tools to satisfy every testing need. To this end, we have created the eggPlant range. The eggPlant range of tools can handle all kinds of testing, from functional to performance and load testing, and even network emulation.
Children
-
AnaPico Ltd
Leading supplier of microwave key components and equipment for high-speed test and measurement applications. The company's core competences comprise design, fabrication and testing of RF and microwave electronic components and instruments.
Children
-
ESI Group
ESI Group, a part of Keysight Technologies, provides reliable and customized solutions anchored on predictive physics modeling and virtual prototyping expertise. Acting principally in automotive, land transportation, aerospace and defense, and heavy industry,
Children
-
Ansys Corporation
Ansys software has enabled innovators across industries to push boundaries with the predictive power of simulation. From sustainable transportation and advanced semiconductors, to satellite systems and life-saving medical devices, the next great leaps in human advancement will be powered by Ansys.
Children
-
Spirent Communications plc
Designs, manufactures, and markets state-of-the-art telecommunications test systems.
Children
-
ITI
As an internationally leading company we offer standard simulation tools for engineers and scientists. Apart from this, we carry out consulting, engineering as well as programming services. The software SimulationX has been applied by the best engineers and scientists of more than 700 important industry companies world-wide.
Related
-
Virginia Panel Corporation
Virginia Panel Corporation (VPC) provides VPC provides Interconnect Solutions that enable simultaneous connection of multiple test and measurement signal types through one modular interface. Designed to accommodate signal, power, RF, thermocouple, pneumatic/vacuum, and fiber optic connector modules in multiple configurations, VPC’s innovative products meet the demands of test & measurement interconnect requirements.
-
Amplicon USA
Amplicon provide the marketplace with a wide range of advanced computer-based measurement and automation systems that can be customised, networked and bundled for easy integration, backed by a technically competent workforce with a highly developed engineering capability and a state of the art EMC test facility.
-
The Test Connection, Inc.
TTCI has been leading the way in electronic test engineering since 1980. As the oldest test engineering company in the electronics industry, our test engineers can be relied upon for flying probe, in-circuit, boundary scan, and functional test solutions. We are a US veteran-owned-and-operated company and an ITAR-registered test development and board testing center with over 100 years of combined test engineering experience. At TTCI, we maximize coverage using the latest technology and provide complete documentation to allow our team to support needs from the earliest design stages to test development to the testing of your product.
