ATX Hardware GmbH
ATX is Europe's market leader in the manufacture of test adapters for electronic testing procedures. As a specialized solutions provider, we design and produce customized products using semi-automated single-unit and small-batch production. Most of our devices are precision-engineered, one-of-a-kind pieces of varying complexity. Customers use our products for in-circuit, functional, and final testing of electronic assemblies and printed circuit boards. Our strong innovative capabilities and commitment to quality set us apart from the competition. As a medium-sized company, the ATX Group employs over 190 people at two locations in Upper Bavaria (Pürgen) and Baden-Württemberg (Ehningen).
- +49 81 96 / 93 04 - 0
- +49 8196 9304-0
- info@atx-hardware.de
- Am Wiesengrund 12
Purgen, 86932
Germany
-
Product
13-Pin Pneumatic Coax Block
-
13-pin pneumatic coaxial block, receiver side.Pneumatics:- Fitted with KSV-PK-4 (VGRCB-13 tyre)- 6mm hoseCoax:- (VGRCB-13C)- Voltage 250VAC- Current 5A- Contact resistance 39mΩ- Impedance 50Ω- Line resources 3.7Ghz (-3db)- Absorption capacity 8.8pf- Inductance 42mH- Resistance 25,000 cycles- Network connection SMB- Max. Power loss *: 25W
-
Product
Automatic Opening 60° For MMI-A-DO
B03-00212
-
60° pneumatic bonnet opening MMI-A-DO (2x pneumatic cylinder)
-
Product
ME2P-B, Pneumatic Adapter
101504
-
The ME2P pneumatic adapter is the perfect solution for high-volume production where precise and automated handling is required. Thanks to the pneumatic stroke and its optional auto-open function, it enables fatigue-free working with manual operation. For combination with robots, the ME2P can be used fully automatically with auto-open-close function in cordoned-off or secured areas. The ME2P offers an opening angle of 90° and is therefore optimised for robot operation. *Universal pin carrier, board carrier and hold-down plate. Can be used with both ME2P and ME2 (with the same board carrier dimensions).
-
Product
ME2-C
101530
-
Discover our latest innovative adapter series, which offers you perfect adapter solutions for needle forces of up to 600 N (approx. 300 needles of 2 N each) with maximum flexibility. The ME2 series includes not only mechanical and pneumatic stand-alone adapters, but also the appropriate change systems and high-frequency variants. What makes this series so special? The seamless compatibility of the interchangeable cassettes within the line. This means maximum flexibility and efficiency in your work.
-
Product
MMI-A-DO, Mechanical Tandem Test Fixture
100659
-
Mechanical tandem test fixture with optimised ergonomics for function test, final test and ICT applications. The MMI dual chamber is prepared for both safety switches with guard locking and electrical interlocking. Our MMI-A-DO test fixture is versatile.
-
Product
Blank | Receiver Side
585011
-
Blank receiver-side pylon block 170-pin/unassembled with 2-pin fixing. Material: 6mm EGS619. Grid dimension = 2.54mm.
-
Product
MMIHF-B, Shielded Test Fixture
100223
-
Shielded test fixture for high frequency and radio application. Protection of the environment from the DUT or shielding of interfering influences on the test. With our high-frequency fixture MMIHF-B, you can test sensitive and transmitting assemblies - even those with a transmitter and receiver combination - in detail without risking consequences for your production.
-
Product
Functional Analyser (FKT)
-
The Feasa Functional Analyser (FKT) is available in 3, 5, 10 and 20 channel configurations. The interfaces for this are USB, RS232 or daisy chain - several LED analysers can be connected to each other via the daisy chain connections. Only one serial RS232 port is required to connect up to 30 LED analysers. The devices with 3, 5 and 10 channels measure 86 mm x 57 mm x 50 mm - the model with 20 channels, on the other hand, measures 127 mm x 57 mm x 55 mm. Each channel has a fibre length of 0.6 m, whereby the fibre has a diameter of 1.0 mm and allows a bending radius of 15 mm. The analyser is designed for a wavelength range of 450 nm to 650 nm and a temperature range of 0 °C to +50 °C.
-
Product
PWG Pylon-1
100978
-
The PWG-Pylon-1 with pneumatic changing system. By changing the cassettes without tools, you save a lot of time in the product changeover. The PWG-Pylon-1 has a bonnet opening of approx. 70°.
-
Product
MMI-DVH, Mechanical Test Fixture
100360
-
Mechanical test fixture with optimised ergonomics for function tests, end tests and ICT applications. The MMI is prepared for safety switches with guard locking as well as for electrical interlocking. Our MMI-DVH test fixture is versatile and has a special cover height (internal cover dimension 114.5 mm). Reinforced version!
-
-
Product
MEP-B
100811
-
The MEP unit model from ATX is perfect if you want to add exceptional flexibility to your test and inspection range - with the simplest control via the compressed air valve. As a stand-alone fixture, your MEP-B is perfect for functional testing, final testing and smaller ICT applications up to 1000N.
-
Product
WK Expansion To Teradyne 23 Slot
106036
-
The WK Expansion to Teradyne 23 Slot is designed to enhance the flexibility and functionality of your testing equipment. This innovative product allows you to assemble the perfect adapter kit interchangeable system, which incorporates both a basic unit and specific kits tailored to your needs. With a focus on versatility, the WK4 model supports 1303 transfer contacts or an optional WK3, providing the adaptability your testing processes require. The wide housing (E01-00089) is engineered to accommodate various configurations, ensuring that you can create the ideal setup for your testing environment.
-
-
Product
LHS2-D, Single-Place Linear Arm Fixture
100828
-
Single-place linear arm fixture, LHS2-D. Your manual fixture for small assemblies with few needles for small series or laboratory set-ups. Small, extra compact and absolutely uncomplicated to operate. Fast and economical testing procedures. linear stroke.
