Nordson Corporation
Nordson strives to be a vital, self-renewing global organization that produces and grows wealth for our employees, customers, shareholders and communities within the framework of ethical behavior and enlightened citizenship. Our employees are the engine that drives our progress in this pursuit.
- +1 440.892.1580
- 28601 Clemens Road
Westlake, Ohio 44145-4551
United States of America
Categories
-
product
X-Ray Detector
XRT Detector Onyx
ONYX 1412-X is a performance-leading X-ray detector comprising a proprietary 2768 × 2376 active pixel sensor array of 50 × 50 µm pixels. This detector consists of a high-speed, low-noise, radiation-tolerant, 14 × 12 cm, 6.6M pixel CMOS image sensor, with a directly deposited high-resolution CsI scintillator on Fibre Optic Plate. The highly configurable sensor is accessed through a software interface, connected via a 10 GbE SFP+ hardware interface.
-
product
X-ray Inspection Performance
MXI Quadra 7
Ultimate image quality and magnification, Quadra 7 reveals quality defects as small as 0.1 µm. Ideal for root cause failure analysis, wire bond integrity checking, component cracking, MEMS inspection and wafer level components including TSV and wafer bumps.
-
product
Measurement Cartridge
DataSync™
The measurement cartridge is at the heart of every Bondtester and is critical to achieving accurate and consistent results.
-
product
Modular Gun Control System
Encore®
The new Encore gun control system is an all digital, easy to operate, energy efficient and modular automatic gun control system that provides precision pneumatic and electrostatic operating parameters for repeatable and reliable performance of automatic powder coating operations. The modular cabinet style design accommodates up to eight automatic gun controllers for easy operation of both reciprocators and in/out positioners.
-
product
Software
ASYMTEK Fluidmove
Fluidmove software offers multiple layers of process controls and many different features for Nordson ASYMTEK's dispensing systems, including fiducial finding capabilities, Iterative Dummy Dot dispensing, and support for ASYMTEK's wide range of system options such as Tilt Dispensing, Auto Dual Simultaneous (ADS), Monocle™ Vision Package (MVP), and more. New enhancements for Fluidmove software are regularly being developed; sign up for the customer newsletter to be notified when new features are available.
-
product
Acoustic Microscope
AMI D9650Z
The D9650Z incorporates the latest C-SAM technology with enhanced features to accommodate the testing of Power Modules as well as performing standard C-SAM operations. This new system configuration is optimized for inspection of heatsink bond integrity, thickness of bond layer and wire bond welds. Powered by our Sonolytics software platform with PolyGate technology, the D9650Z is ideal for failure analysis, process development and QC screening in low-volume production environments.
-
product
High Resolution Inline AXI Platform
AXI XS Series
The XS-platform series is a small-footprint high-resolution automated X-ray inspection system concept designed for sophisticated high-speed inspection of semiconductor samples, wire bonds and PCB-assembly boards for single/multipanels or samples in trays. The inspectable applications range from component level inspection to mid-sized SMT boards.
-
product
MXI Computerized Tomography (CT) Option
The Nordson TEST & INSPECTION µCT inspection option provides Computerized Tomography (CT) functionality to compliment the 2D X-ray investigations on Nordson TEST & INSPECTION X-ray inspection systems. It uses the superior, sub-micron feature recognition 2D x-ray images, that Nordson TEST & INSPECTION X-ray systems always provide, to produce the best CT models for 3D sample analysis, virtual micro-sectioning and internal dimensional measurements. It reduces the number of time-consuming micro-section analyses needed and / or assists in identifying where micro-section preparation and investigation must concentrate. Available with a system order or as retro-fit to suit application and workflow needs.
-
product
Side X Side Two-Component Cartridges
Our Side x Side cartridges feature a rugged, one-piece design that resists bulging to ensure on-ratio dispensing. These cartridges are ideal for packaging and dispensing two-part fluids for industrial applications.
-
product
Jetting Valves
PICO Pµlse
Nordson EFD’s PICO Pµlse ® exchangeable, modular jet valve technology dispenses with industry-leading accuracy and speed to apply very precise, repeatable micro-deposits at 1000Hz continuous and bursts up to 1500Hz*.
-
product
Universal Offline AXI Systems
AXI XT-6 Series
The XT-series provides the advanced inspection capability of Nordson TEST & INSPECTION's inline system in a smaller footprint manual load/island of automation system. The platforms are designed for flexibility and ease of use for a wide variety of products requiring 2D and 2.5D automated X-ray inspection. The XT-6/XT-6A platform is a highly flexible automated X-ray inspection system with minimum footprint and a parallel-kinematic Hexaglide manipulation unit for extreme-angle off-axis image acquisition with high resolution. It is suitable for high-quality X-ray analysis of electronic assemblies and material analysis of parts that require flexible part manipulation with multiple inspection angles. For batch modes and volume inspection the XT-6 can be equipped with a single-sided conveyor setup and magazine load/unload station (XT-6A).
-
product
Acoustic Micro Imaging.
AMI Gen7
The New Generation of C-SAM Technology. The most sophisticated and fully featured C-SAM acoustic microscope for laboratory analysis and specialized high resolution applications.
-
product
Flow Controllers
Concert™ Series
Concert flow controllers enable real-time flow monitoring and control when used with Nordson TruFlow™ devices – meters, dividers or applicators. This variation management capability helps improve material delivery and dispensing so manufacturers reduce waste, improve product quality and enhance production efficiency.
-
product
Disposable Square Turbo Mixers
Shorter than comparable spiral mixers, Nordson EFD’s square Turbo™ Mixers allow users to get closer to their application while reducing adhesive waste.
-
product
High Speed Inline AXI Platform
AXI X Series
The X-platform series is a dedicated high speed inline automated X-ray inspection system for the inspection of PCB-assembly boards for single/multipanels or samples in trays. The system offers market leading inspection speed and is ideal for low-mix high-volume production environment.
Parent
-
Nordson Corp.
Dispensing Equipment & Industrial Coating EquipmentCompany description.
Siblings
-
Nordson Adhesive Systems
We engineer, manufacture and market differentiated products used for dispensing adhesives, coatings, sealants, biomaterials and other materials; for fluid management; for test and inspection; and for UV curing and plasma surface treatment.
Siblings
-
YesTech, Inc.
YESTech, Inc., a division of Nordson Corporation, joining Nordson’s Advanced Technology Systems segment as a leading global provider of automated optical inspection and high-resolution x-ray inspection systems. The full line of inspection systems offers cost-effective, integrated yield enhancement solutions for the printed circuit board assembly, advanced semiconductor-packaging and hybrid assembly to EMS providers and electronics OEM's worldwide.
Siblings
-
Nordson Dage (Obsolete)
Control of the patented core technology of X-ray tube manufacture ensures that the high-resolution X-ray will detect, identify and measure even the smallest of features. DPI's high precision, state-of-the-art inspection equipment when joined with their sophisticated software offerings, ensure that the equipment is simple to use.
Siblings
-
Matrix Technologies GmbH (Obsolete)
Matrix Technologies GmbH is a global supplier of high-speed Automated Inline X-ray Inspection systems (AXI) and semi-automated X-ray Inspection systems to ensure the quality of critical electronic devices/components and electronic printed circuit boards manufactured by its customers.
Siblings
-
Matrix Technologies GmbH
Matrix Technologies GmbH, founded in 2004 and headquartered in Munich/Feldkirchen (Germany), is a market leading provider of Automated Inline X-ray Inspection systems (AXI & MXI for Electronics) that are used to control the manufacturing process and to ensure the quality of critical electronic devices, electronic printed circuit boards or fully assembled devices manufactured by its customers using surface mount technology (SMT). In addition, Matrix supplies automated and manual inspection solutions for Non-Destructive Testing (AXI for NDT) of other non-electronic materials such as casting or medical parts by using X-ray or Computed Tomography (“CT”) technology.
Siblings
-
Nordson Measurement & Control Solutions
We’re doing great things to transform manufacturing businesses around the world. Since our inception, we’ve always placed our focus on the customer and helping to drive outcomes that matter most. At Nordson Measurement & Control Solutions (formerly NDC Technologies) we’ve been delivering solutions for over 50 years, and our capabilities, depth of innovation experience and global reach have been growing ever since. We’ve played a dominant role in the food, bulk and tobacco; film extrusion and converting; cable and tubing; and metals industries. We know how to solve the toughest measurement and control challenges.
Siblings
-
CyberOptics Corporation
CyberOptics is a fully owned subsidiary of Nordson Corporation. The CyberOptics portfolio of high-precision sensors and systems for inspection and metrology, is part of the Nordson’s TEST & INSPECTION product line. CyberOptics solutions are used in SMT and semiconductor applications to improve customers’ yields, processes and productivity.
