Product

Gauge Type T Thermocouple Wire

W-TW-26

-

Physitemp Instruments

W-TW-26 - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

Hot Air Ceramic Temperature Sensor Locater Kit

TPL09

-

Edsyn Inc.

TPL09 - Edsyn Inc.

Hot Air Ceramic Temperature Sensor Locater Kit for TP795 with TPL09-1, LT428 and LU29

Product

Wire Crimp Pull Tester (Manual)

WT3-201

-

Mark-10 Corp.

WT3-201 - Mark-10 Corp.

The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]). The tester accommodates most insulation types. Samples can be sent to Mark-10 for evaluation prior to purchase.

Product

Cable Sheath Fault Location

-

Megger Group Ltd.

Megger Group Ltd.

Locating cable sheath faults is one of the last steps in cable testing, occurring after you have identified the existence of a cable fault via the identification procedure based on your specific site variables and the type of system you are working on

Product

Cable Fault Locator

TX4000

-

BI Communications

TX4000 - BI Communications

Auto Fault Location Rugged Palm-Top design Weighs less than 350g (12oz) 11 Measurement Ranges up to 4000m 25, 50, 75 & 100ohm Selectable Cable Impedance User Variable Gain Control Built in Tone Generator for Pair Tracing and Identification Suitable for testing all Communication and Power Cables Environmental Protection IP54 CE Approved Soft bag & Test Leads

Product

- RS-232 to RS-422/RS-485 Concentrator - Wiring Hub

Model 290

-

Telebyte, Inc.

Model 290 - Telebyte, Inc.

FEATURES: Break RS-485 Limit, Expand to 496 Nodes 16 Port Capacity; Each Port Settable to RS-422 or 2 Wire RS-485; Provides Isolation Between Ports; All Ports Surge Protected; Increased System Reliability. The Model 290 RS-232 to RS-422/RS-485 Concentrator offers a unique group of features for those applications using RS-422 and/or RS-485 for communications between a multiplicity of devices.

Product

Fault Finder for Electrical Wiring Open / Short Circuit

FF310

-

General Technologies Corp.

FF310 - General Technologies Corp.

42 V Ready: for use in the new generation of vehicles with mixed or single 42 Volt systems. Operates on DC voltages from 6 to 42 volts. Internally protected against power surges and overloads. 8" flexible probe allows reaching wires in congested places. Transmitter and Receiver LEDs show open or short circuit conditions.

Product

Pre- Locator

CFL PL3

-

Scope T&M Pvt, Ltd.

CFL PL3 - Scope T&M Pvt, Ltd.

CFL PL3, new generation Cable Fault Pre-Locator from SCOPE is the ultimate solution for locating underground cable faults in minimum time. It uses advanced technology for fault distance measurement which helps even an unskilled operator to locate the fault with accuracy.

Product

Pipeline & Cable Fault Locator

TM2000

-

T&M Tools Limited Co

TM2000 - T&M Tools Limited Co

TM2000 Pipeline & Cable Fault Locator is designed for the Underground utilities route locating, the depth measuring and disatance tracing.

Product

Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

-

Adafruit

Adafruit

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0C, thus the name PT100. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT100's have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy (better than thermocouples), repeatability, and stability.

Product

Utility Locating with LMX GPR

LMX200™

-

Sensors and Software Inc.

LMX200™ - Sensors and Software Inc.

Unprecedented insights and target confidence. Detect traditionally non-locatable subsurface features:Non-metallic pipes, including PVC and asbestos cementConcrete storm and sewer systemsUtilities where installed tracer wiring has failedUnderground storage tanks and drainage tilesSeptic system componentsNon-utility structures such as vaults, foundation walls and concrete pads

Product

Mobil Cable Test and Fault Location System

SWG-12 (SWG-32)

-

Kharkovenergopribor Ltd.

SWG-12 (SWG-32) - Kharkovenergopribor Ltd.

• testing cable insulation with DC (rectified) voltage up to 32 kV;• conditioning faults by burning faulty cable insulation with current up to 100 mA;• pre-locating cable faults with the reflectometer RIF-9 based on the pulse reflection method (TDR), voltage wave oscillation method (DECAY), impulse current envelope (ICE) method and arc reflection method (ARC / ARC multi-shot);• pinpointing cable faults with the acoustic method with up to 2000 J surge wave generator and a suitable signal receiver.

Product

Temperature Wire Sensors

-

Omega Engineering, Inc

Omega Engineering, Inc

Temperature Wire Sensors

Product

Banana-Triax Adapter For 4‑Wire (Kelvin) Connection

N1297B

-

Keysight Technologies

N1297B - Keysight Technologies

The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.

Product

4 Wire Earth Resistance & Resistivity Tester

4235 ER

-

Standard Electric Works Co., Ltd

4235 ER - Standard Electric Works Co., Ltd

● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.

Product

Open-Frame Collet Socket with Wire Wrap Pins

Series 508

-

Aries

Series 508 - Aries

Open Frame Collet Sockets with Wire Wrap Pins. Features: Open frame allows for more efficient utilization of board space and better cooling. 2 and 3 level wire wrap pins available. Compatible with automatic insertion equipment. Side-to-side and end-to-end stackable.

Product

Heavy Duty Circuit Tester with 12' Retractable Wire & Battery Clip

27300

-

S & G Tool Aid Corp

27300 - S & G Tool Aid Corp

Features an extra long wire that stretches up to 12 feet for use, then automatically retracts. Quickly and easily check electrical circuits and accessories on 6 and 12 volt systems. Great for use on cars, trucks, boats, trailers, motorcycles, airplanes and snowmobiles. Heavy duty ground clip with insulator. 3 1/4" standard length probe

Product

4 Wire Earth Resistance & Resistivity Tester

4236 ER

-

Standard Electric Works Co., Ltd

4236 ER - Standard Electric Works Co., Ltd

● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.● Optical USB to RS-232 data transmission.● The stored data can be transferred to a PC.● 2 optical LEDs are built-in for data transfer.

Product

Bench-Top Wire Crimp Pull-Force Tester

PT-1500

-

Molex, Inc.

PT-1500 - Molex, Inc.

PT-1500 Bench-Top Wire Crimp Pull-Force Tester, Manual Lever-operated for 5.84mm 8-30 AWG

Product

Metal Cover Locator

CS880

-

C.Scope International Ltd

CS880 - C.Scope International Ltd

The CS880 Metal Cover Locator is a metal detector that will locate lost or hidden metal objects. It is most commonly used for locating manhole covers through tarmac and grass.