Product

Frequency Synthesizers 50 MHz to 21 GHz

Luxyn Model MLVS-0520

-

Micro Lambda Wireless, Inc.

Luxyn Model MLVS-0520 - Micro Lambda Wireless, Inc.

Lyxyn synthesizers are ideal main local oscillators in Receiving Systems, Frequency Converters and Test & Measurement Equipment. MLVS-0520 is VCO-based and provides 0.001 Hz frequency resolution over the 50 MHz to 21 GHz frequency range. Output power level of +15 dBm is provided throughout the full frequency range. Full band switching speed is 50 μsec maximum. The MLVS-0520 is 4” x 3.6” x 0.94” high.

Product

Frequency Converter Upwards

UPCONVERTER 10 GHz VXI

-

Holding Informtest

UPCONVERTER 10 GHz VXI - Holding Informtest

The UPCONVERTER 10 GHz control software is VXI Plug & Play and does not depend on the module version. The software allows for automated calibration and verification of the main characteristics of the device.

Product

HF Frequency Counter LXI, GPIB/IEEE48

53210A

-

Meilhaus Electronic GmbH

53210A - Meilhaus Electronic GmbH

For fast and accurate frequency and time-interval measurements, you need reliable devices in research and development. The Keysight 53210A HF frequency counter meets the requirements with its high accuracy, bandwidth and speed. Depending on the application and budget, choose one of the three available models. The connection to the PC is via USB, Ethernet/LXI or via GPIB.

Product

Frequency Extension Calibration Kits

FEK

-

Farran Technology Ltd

FEK - Farran Technology Ltd

Farran’s FEK-xx-0001 calibration kit provides accurate calibration of the Vector Network Analyzer (VNA). It is compatible with TRL and SOLT calibration techniques and allows for a full 12-term port calibration.

Product

Standard Electromagnetic Vibrator

KD-9363-EM

-

King Design Industrial Co., Ltd.

KD-9363-EM - King Design Industrial Co., Ltd.

The purpose of vibration testing is to make a series of controllable vibration simulation in lab, no matter generated by natural or man-made vibration environment; such as waves, tidal flaps, wind, earthquake or rain and so on. It is to test if the product is capable of sustaining the vibration environment exerted from transporting or usage along its effective life cycle; and certify the standard of design & functional requirement of product. The value of vibration testing is to confirm the reliability of products and effectively screen out the bad products in factory; avoiding damages occurred at arrival; and to assess the failure analysis on the non-performing products; expecting to reach a high standard, high-reliability products. The vibration test stresses on the continuity and fatigue; and contributes to the understanding of product’s status under vibration circumstance in a normal environment; and avoids the product’s unpredictable damage caused under certain vibrating frequency for a long time.

Product

Single Or Dual Stream MIL-STD-1553 A/B &4, 8 Or 12 Channel ARINC429 Mixed ProtocolTest & Simulation Module For Standard Ethernet

ANET-MxAy

-

AIM GmbH

ANET-MxAy - AIM GmbH

Single or dual stream MIL-STD-1553 A/B and 4, 8 or 12 channel ARINC429 mixed protocol Test & Simulation module for standard Ethernet. The ANET embedded Linux operating system gives the unique capability to run the optional PBA.pro Engine right in the box.Another option is the ANET-ADK onboard software development kit where users create runtime applications (e.g. MIL-STD-1553 to Ethernet Converter / ARINC429 to Ethernet Converter , MIL-STD-1553 to Ethernet Gateway / ARINC429 to Ethernet Gateway) to execute right in the box. For wireless applications an ANET compatible USB Wifi dongle is optionally available. The capability to execute Python scripts in the ANET is a standard feature. For applications with multiple ANET devices AIM offers the ADock ANET docking station to host up to 4 ANET modules.

Product

Online Audio Frequency Signal Generator

WavTones

-

Dr. Ir. Stéphane Pigeon

WavTones - Dr. Ir. Stéphane Pigeon

We are proud to offer not only the best audio frequency signal generator on the net, but also a high-end sound generator, which compares favorably to the more expensive software and hardware tone generators!

Product

PathWave BenchVue AC Source Avionics Standard Test Software

BV0028B

-

Keysight Technologies

BV0028B - Keysight Technologies

Control your AC source and accelerate pre-compliance testing as per the avionics and military-standard requirements at ease.

Product

High Frequency LCR Meters up to 30MHz

11050

-

Chroma Systems Solutions, Inc.

11050 - Chroma Systems Solutions, Inc.

The Chroma 11050 Series HF LCR Meter is a precision test instrument designed to accurately measure and evaluate passive components at high speeds. Its measurement capabilities cover the primary and secondary parameters required for testing the inductance, capacitance, resistance, quality factor and loss factor of passive components. The HF LCR Meter has a broad testing frequency range 75kHz~30MHz/1kHz~10 MHz/60Hz~5MHz suitable for analyzing component characteristics under different frequencies. Its 0.1% basic measurement accuracy provides stable and highly reliable results. A fast 7ms measurement speed effectively increases productivity when working in an automated environment.

Product

High Frequency Cartridge for HFP Series Probes

PACC-MS003

-

Teledyne LeCroy

PACC-MS003 - Teledyne LeCroy

High Frequency Cartridge for HFP Series Probes

Product

Barcode Conformance Calibration Standards

-

Applied Image, Inc.

Applied Image, Inc.

Barcode symbol quality has been at the forefront of discussion among practitioners in the automatic identification and data capture (AIDC) industry since they were invented in 1951. Barcodes became commercially successful when they were used to automate checkout systems at grocery stores, with the very first scanning of the Universal Product Code (UPC) on a pack of Wrigley Company chewing gum in June 1974. The Uniform Code Council (UCC) published barcode quality guidelines, and ANSI X3.182-1990 became the first published standard for barcode quality. Since then, ISO/IEC 15416 for 1D symbols and ISO/IEC 15415 for 2D symbols have become the global standards for grading printed barcodes.

Product

Personal RF Detection Meters, Low Frequency

-

Sensory Perspective Ltd

Sensory Perspective Ltd

Personal RF Detection Meters, Low Frequency by Sensory Perspective Ltd.

Product

Frequency Dividers

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

SMA SPDT electro mechanical RF relay switch features Indicators, Failsafe, Normally Open with an isolation minimum of 60 dB. SPDT electromechanical relay radio frequency switch PE71S6052 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

Product

Reference Standard

-

Beijing GFUVE Electronics Co.,Ltd.

Beijing GFUVE Electronics Co.,Ltd.

It has been designed for universal laboratory and test applications and is intended for checking and the calibration of reference standards for electrical power and energy.

Product

Standard 0.62 (18.00) - 4.00 (114.00) High Performance Lead Free Probe

LFRE-1V-4

-

ECT

LFRE-1V-4 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Standard C23 20x30 Mm Photoelectric Sensors

-

Contrinex AG

Contrinex AG

Contrinex Standard C23 20x30 Mm Photoelectric Sensors

Product

Standards Source Instrumentation

-

Marvin Test Solutions, Inc.

Marvin Test Solutions, Inc.

PXI Arbitrary Waveform and Programmable Function Generators as well as DC source cards and a precision standards module.

Product

5 Digit Frequency Meter

CM1-F

-

Adtek

CM1-F - Adtek

CM1-F is an economical and simple frequency meter with a 20mm 5-digit LED display, and the display rangecan be set by pressing the button. Anti-interference design, reliable quality, simple installation and operation.At the same time, it has 2 sets of relay output or 1 set of analog output or 1 set of RS485 (Modbus RTU mode) communication ports for selection.The built-in design of the operation buttons can avoid human misoperation and is suitable for various mechanical use.

Product

Reflectance Standards

STAN Series

-

Ocean Optics, Inc.

STAN Series - Ocean Optics, Inc.

Ocean Optics offers specular reflectance standards for measuring shiny surfaces such as machined metals and semiconductor materials and low-reflectivity surfaces such as anti-reflective coatings and thin film coatings. The STAN-SSH varies in reflectivity from 87%-98% over the 200-2500 nm wavelength range and is available in a version (STAN-SSH-NIST) calibrated to a NIST master standard. The NIST calibration data range is 250-2500 nm.