3D SPI
checks form, height, surface area, bridges, volume, x/y offset and coplanarity of solder.
See Also: 3D Solder Paste Inspection
-
Product
TTL/I2C/SPI Expansion Kit
OP-SB85L
-
OP-SB85L is the interface expansion kit that has a port to measure TTL / CMOS signal level communications, and the one to measure the voltage of high-speed analog input. The port for TTL / CMOS supports the measurement of TTL / CMOS level communications that power supply system is from 1.8V to 5V. It is suitable for monitoring the communication between the LSI and the interface IC on the printed circuit board by directly probing into the lines. It supports the protocol of not only UART and HDLC but also I2C and SPI on monitoring and simulating.
-
Product
3D Scanning System
CyberGage360
-
Unprecedented combination of speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection.CyberGage360 dramatically Speeds Up Quality Assurance of Incoming Parts Inspection & In-Process Inspection of components on the manufacturing floor; Lowers Cost of Quality & Speeds Up Product Time-to-Market. Designed for use in general purpose metrology, the CyberGage360 has a range of potential industrial applications from automotive to aerospace to consumer electronics, where high accuracy and high speed throughput are important.
-
Product
Revopoint MetroX: Blue Laser Line and Full-field Structured Light 3D Scanner
-
4 Flexible Scanning Modesꔷ Metrology-grade Accuracy: Up to 0.03 mmꔷ Volumetric Accuracy: Up to 0.03 mm + 0.1 mm × L(m)ꔷ Up to 7,000,000 Points/s in Full-field Structured Light Modeꔷ Up to 800,000 Points/s in Multi-line Laser Mode
-
Product
High Precision 3D Metrology
-
Ensure zero-defect quality in all product deliveries and boost customer satisfaction: ISRA’s precision metrology systems measure all object and surface properties down to the nanometer level while ensuring the shortest cycle times.
-
Product
3D Optical Surface Profiler
NewView™ 9000
-
The NewView™ 9000 3D optical surface profiler provides powerful versatility in non-contact optical surface profiling. With the system, it is easy and fast to measure a wide range of surface types, including smooth, rough, flat, sloped, and stepped. All measurements are nondestructive, fast, and require no sample preparation.
-
Product
3D Scanner
Artec Eva Lite
-
Eva Lite is the budget version of the bestselling white light Artec Eva 3D scanner. It features the same accuracy specs, but with reduced functionality: Eva Lite has geometry only tracking and capture. As a result, this affordable 3D scanner can be used for making high quality textureless 3D scans when scanning geometrically rich objects, such as the human body.
-
Product
Non-contact 3D Optical Profilers
-
LuphoScan platforms are interferometric, scanning metrology systems. They are designed to perform ultra precision non-contact 3D form measurements mainly of rotationally symmetric surfaces such as aspheric lenses.
-
Product
Simple 3D Measurement & Inspection
XG-X Series Vision System
-
Abundant processing power is available even with multiple camera connections, including the 21 megapixel color camera, line scan cameras, or 3D cameras. XG-X Series offers high-speed, high-resolution cameras for high-accuracy inspection, providing powerful solutions for a variety of problems that arise in manufacturing.
-
Product
3D Bundle
-
Cost effective bundle of eVision's 3D librariesIncludes Easy3D, Easy3DLaserLine, Easy3DObject and Easy3DMatch
-
Product
3D Scanning Reverse Engineering Services
-
Reverse engineering is oftentimes a catch-all term used for many design and engineering applications. But trust us, there is so much more to this category for the uses of our 3D scanners, portable CMMs and laser trackers. Also, reverse engineering tends to imply that the 3D scanning will be used solely for product design, when in fact it can be used to address many other engineering functions such as:
-
Product
3D Sensor
C6 Series
-
The new 3D C6 series by AT is built on a novel sensor platform that supports the latest industrial standard GigE Vision/GenICam 3D at 1 Gbit/s. These new laser profilers offer an impressive combination of extremely fast and highly precise resolution, reaching up to 4,096 points per profile, a profile speed of up to 200 kHz, and high dynamic range 3D image capture. They are available as compact sensors, MCS, and 3D cameras.
-
Product
ATR 3D Layout Machine
-
ATR Model is standrad layout machine for marking work and 3D measruing.
-
Product
3D Scanner
Lion3DX
-
Lion3DX is desktop size 3D scanner with high accessibility for everyday use, equipped with automatic 2-axis platform.
-
Product
3D EarthWork Estimation Software
-
ScienceGL offers virtual cut-and-fill excavation software for earthwork and material takeoff estimation. The software is based on latest 3D technology that lets you to accelerate your construction earthwork estimation. The most natural perception of the whole cut-and-fill process makes your job faster, easier and more accurate. Unlike of the standard software packages for estimation we provide you new realistic "virtual presence" interactive environment. Powerful estimating package for construction earthwork and material quantity calculations.
-
Product
3D CT AXI
-
PCB manufacturers can enjoy comprehensive, high-speed inspection with Omron’s revolutionary technology that reliably captures defects in hidden areas.
-
Product
3D Compliance SAR System
cSAR3D
-
Schmid & Partner Engineering AG
cSAR3D is our newest and most advanced system for fast, high-precision SAR measurements of wireless devices. We have realized a system concept that has been developed over the last years to meet the demands of our highly valued customers. The system uses a novel sensor concept and advanced reconstruction algorithms. The measurement system has high absolute accuracy due to the determination of all field components in a large region of the head and body phantoms.
-
Product
Inspection System for high-power precise 3D X-ray CT
X-eye PCT225
-
Inspection System for 3D X-ray CT able to analyze defected area precisely by precise movement of axis with high polished Anti-vibration table. High-power X-ray Tube of max. 450kV and large area Flat Panel Detector of max.16 inches can be installed depending on the sample. Customized 3D CT equipment is available with selecting main parts by customers depends on their needs for size and material.
-
Product
3D Optical Profiler
Nexview™ NX2
-
Designed for the most demanding applications, the Nexview™ NX2 3D optical profiler combines exceptional precision, advanced algorithms, application flexibility, and automation into a single package that represents ZYGO's most advanced Coherence Scanning Interferometric (CSI) profiler.
-
Product
SPI Isolators
-
SPI (Serial peripheral interface) is one of the most widely used interfaces between microcontrollers and peripheral ICs such as sensors, ADCs, DACs, shift registers, SRAM, and others. Analog Devices has your isolated SPI bus covered with our dedicated SPI digital isolators which support this synchronous, full duplex master-slave-based interface. Options include devices built with ADI's proven iCoupler® technology and offering a small footprint, simple design-in, fast speeds, and high data integrity, as well as integrated µModules which require no external components. Our SPI isolator solutions increase performance and reduce board space. This simple, compact solution is ideal for isolated SPI data requiring communication across different ground potentials or through large common mode transients often found in Industrial PLCs (programmable logic controllers) and Instrumentation and data acquisition systems.
-
Product
3D Video Microscope
BVM-20102B
-
High-resolution CCD sensor, built-in analog/digital converter, analog and digital signal directly display on the screen, can also simultaneously display on TV and computer through corresponding interfaces; taking photo and video through software; easy operation, reducing user's fatigue and injury.
-
Product
3D Solder Paste Inspection system
PI Series
-
PI Series is a new generation 3D Solder Paste Inspection system that overcomes the limitations of traditional SPIs and satisfy all your inspection needs. The PI Series allows to easily implement Solder Paste Inspection in any PCBA line. These new generation systems are very intuitive to use, allowing non-experienced persons to get expected results.
-
Product
3D Sensing
-
The rapidly growing field of 3D sensing is currently addressed by the following 3D camera technologies: stereoscopic imaging, time-of-flight (ToF) sensing, and structured light.
-
Product
DIgital 3D Image Correlation System
Q-400
-
The Digital 3D Image Correlation System Q-400 is an optical measuring device for true full-field, non-contact, three-dimensional measurement of shape, displacements and strains on components and structures made from almost any material.The Q-400 system is used for determination of three-dimensional material properties in tensile, torsion, bending or combined tests. In addition, deformation and strain analysis can be applied to fatigue tests, fracture mechanics, FEA validation, and much more.
-
Product
USB-8451, 250 kHz I2C, 12 MHz SPI I2C/SPI Interface Device
779553-50
-
The NI USB‑8451 is a master interface for connecting to and communicating with inter-integrated circuit (I2C), System Management Bus (SMBus), and serial peripheral interface (SPI) devices. With plug‑and‑play USB connectivity, the USB‑8451 is a portable solution to communicate with consumer electronics and integrated circuits. It also includes eight general-purpose digital I/O lines for a variety of applications, such as configuring the address of I2C devices or toggling LEDs. The USB‑8451 can be physically located more closely to I2C/SPI devices than PCI interfaces, reducing I2C bus length and minimizing noise problems. Additionally, the interface provides +5 V and GND to power circuits with no external power supply.
-
Product
Small Fanless 3D Control FAYb Laser Marker
LP-M Series
-
Panasonic Industrial Devices Sales Company of America
The LP-M series offers a small, fan-less head design with an IP64 protection to prevent dust and water entering from any direction. The 3D Control capability allows marking on various types of products and complicated shapes to meet a large number of application needs. - 20, 50 & 100 Watt Models- Compact IP64 Rated Head- Full 3D Features- Auto Focus capable- Redundant Safety Features
-
Product
3D Video Microscope
BVM-20104
-
The microscope is configured with 1.3M HD industrial camera. VGA image output interface, can be connected to the computer and monitor directly. clear and vivid image, taking photos, SD card storage, auto exposure. Camera is equipped with remote control panel, which makes the operation much easier. Optical lens keep parfocal under zoom, there is no deviation for center; 3D rotary observation
-
Product
3D Sensor (Shiny Surfaces)
reflectCONTROL
-
reflectCONTROL is designed specifically to meet the high quality requirements that ensure high quality for shiny surfaces. The system based on deflectometry projects a striped pattern onto the measurement object. Defects on the surface cause deviations from the striped pattern which are recorded by cameras and evaluated by software.
-
Product
3D Cameras
-
Imaging Development Systems GmbH
3D Machine Vision is considered to be the future of Robot Vision. The integration of 3D data makes it possible to precisely capture and interpret the environment, enabling tasks in robot technology to be solved more efficiently. This applies both to demanding assembly processes, such as gluing or welding, and to the notoriously tricky process of "bin picking". With the Ensenso 3D cameras and the Nion ToF camera, IDS offers powerful camera systems for 3D imaging – with a focus on precision, cost-effectiveness and easy integration.
-
Product
USB-8452, 3.3 MHz I2C, 50 MHz SPI I2C/SPI Interface Device
781964-03
-
The NI USB‑8452 is a master interface for connecting to and communicating with inter-integrated circuit (I2C) and serial peripheral interface (SPI) devices. With plug‑and‑play USB connectivity, the USB‑8452 is a bus-powered, portable solution to communicate with consumer electronics and integrated circuits. It also includes eight general-purpose digital I/O lines for a variety of applications, such as configuring the address of I2C devices, toggling LEDs, or strobing convert and data ready lines common to analog converter chips. You can physically place the USB‑8452 more closely than PCI interfaces to I2C/SPI devices, which reduces I2C bus length and minimizes noise problems. Additionally, the interface provides +5 V and GND to power circuits with no external power supply.
-
Product
USB-8452, 3.3 MHz I2C, 50 MHz SPI I2C/SPI Interface Device
781964-02
-
The NI USB‑8452 is a master interface for connecting to and communicating with inter-integrated circuit (I2C) and serial peripheral interface (SPI) devices. With plug‑and‑play USB connectivity, the USB‑8452 is a bus-powered, portable solution to communicate with consumer electronics and integrated circuits. It also includes eight general-purpose digital I/O lines for a variety of applications, such as configuring the address of I2C devices, toggling LEDs, or strobing convert and data ready lines common to analog converter chips. You can physically place the USB‑8452 more closely than PCI interfaces to I2C/SPI devices, which reduces I2C bus length and minimizes noise problems. Additionally, the interface provides +5 V and GND to power circuits with no external power supply.
