Test Management Tools
See Also: Test Management, Test Management Software, Test Management Applications, Test Management Solution, Test Management Suite
-
Product
SOP Managemen and Quality Management
arivis BM-Windream
-
BM-windream is the 21 CFR Part 11 compliant data and document management system for the pharmaceutical industry. It is based on the market leading windream document management system from windream GmbH, Bochum. In addition to our industry-specific modules, we have access to a series of tried and tested windream add-on modules from our partner network, e.g. for e-mail archiving, linking to ERP systems, CRM systems, knowledge management or scanning solutions. BM-windream provides a basis for your data and document management that can be validated at relatively low cost (configurable standard software complying with GAMP5) and is easy to use. Users access your documents using a virtual network drive in Windows Explorer, which means that little training is required. BM-windream provides a standardised user interface over the entire life cycle of a file, from creation to deletion. At all phases in this life cycle, a change history (audit trail) is recorded. BM-windream is suitable for handling all kinds of non-managed documents. BM-Flow integrates directly with BM-windream and provides the document management functions required for SOP management,manufacturing instructions etc. All general employees can then still access the documents using the familiar Windows Explorer, while those responsible for creating documents can also use the workflow interface in BM-Flow.
-
Product
TPMS Tool
TPA 300
-
The Bosch TPA 300 is a comprehensive TPMS tool designed for sensor programming, activation and ECU reset. The full-color, intuitive interface guides the user when replacing and servicing TPMS sensors. When paired with a compatible Bosch diagnostic scan tool, like ADS 325 or 625, users can reset the ECU in less than two minutes. The TPA 300 supports all known OE and aftermarket programmable sensors for all light vehicles. Frequent updates allow new features, vehicles and sensor coverage to be added regularly.
-
Product
Power Management & MMI Module
H73000700
-
This module, named “6TL-MMI”, is designed to be the interface between an operator and a SYSTEM as well as being a metered power distribution unit (PDU) for it. The module is providing also safety controls, data bus interfaces, temperature control and timers. The 6TL-MMI is suitable for any ATE, and specially for those based on CAN bus controlled devices, because in addition to the above functionalities, this module is also providing galvanic isolation up to 1500V for the CAN bus. This isolation will block potential disturbance towards the DUT.
-
Product
Cable Avoidance Tool
DXL4
-
The C.Scope DXL4 is a dual-frequency (33+131kHz) Cable Avoidance Tool with Depth Measurement. In-built Data Logging as standard. Bluetooth™ connectivity and GPS tracking options available. Designed for use with an SGA4 or SGV4 Signal Generator.
-
Product
VoIP & Network Quality Manager
-
VoIP monitoring software designed for deep critical call QoS metrics and WAN performance insights
-
Product
EtherCAT Conformance Test Tool (CTT)
ET9400
-
The Conformance Test Tool (CTT) enables in-house testing of EtherCAT slave devices. The use of the CTT supports EtherCAT device development, helps to ensure conformance prior to device release and to prepare the device for the official, independent Conformance Test in an EtherCAT Test Center (ETC) accredited by the EtherCAT Technology Group.
-
Product
IndySoft for Calibration Management
-
The IndySoft Calibration Management workflow offers a rich feature set to manage the entire lifecycle of your quality assets. With support for leading enterprise platforms it's perfect for deployment in the corner lab of a startup manufacturing facility or a multi-site international quality-driven operation. With the IndySoft exclusive process modeling engine, companies can re-configure the event-driven workflows with checkpoints, rule sets, and documentation at every point along the equipment path, ensuring assets are handled according to their exacting requirements.
-
Product
Managed Ethernet Switches
-
CommFront offers a range of rugged, industrial-grade, managed and unmanaged Ethernet Switches. These Industrial Ethernet Switches have been designed for harsh industrial environments and withstand a wide temperature of -40°F to 185°F (-40°C to 85°C), and they come with the options of 10/100/1000M for both Fast and Gigabit Ethernet networks. In addition, our advanced, rugged, industrial-grade, Fast and Gigabit Ethernet Switches support both point-to-point and multi-drop (daisy-chain or self-healing redundant ring) fiber optic networks, which are designed to cover large areas. These industrial Ethernet Switches support up to 255 fiber nodes, and each fiber node can extend the Fast and Gigabit Ethernet data up to 100 miles or 160 km. When configured as a ring network, the built-in self-healing feature allows the Ethernet data to be transmitted clockwise or counterclockwise; therefore, failure of any individual converter will not affect other devices located on the same ring, making the entire Ethernet network more robust and reliable.
-
Product
ADAS Tools
-
This 12.7-inch wireless touchscreen tablet comes replete with all the functionality expected in an advanced diagnostic and service tablet including the ability read and erase codes, view Freeze Frame and view and graph Live Data, perform Active Tests and perform coding and adaptions, plus it includes ADAS calibration and Wheel Alignment software.
-
Product
Cross Development Tools
S12X and XGATE
-
Cosmic Software's S12X and XGATE Development Tool Suite delivers the features and performance needed to create cutting edge applications. These tools are focused on leveraging the unique benefits of the S12X microcontroller family and XGATE module, while maintaining a standardized easy to use programming environment.
-
Product
Keysight License Manager
-
Keysight License Manager is a free software utility that enables you to easily manage right-to-use licenses for software and hardware capabilities on Keysight instruments or systems.
-
Product
Engineering Tools
-
ADLINK presents a wide array of useful engineering tools to assist professionals in different product developments.
-
Product
Sentry System Manager
SENTRY-III-D
-
The Sentry III Diagnostic Monitor is a microprocessor-based instrument for monitoring and controlling the power supplies, fans, etc. in an Elma chassis.
-
Product
TV Metadata Management
GuideBuilder
-
With over 1,300 installations, GuideBuilder® is the market-leading DTV signaling, announcement, and EPG metadata generation and management system.
-
Product
Laboratory Data Management
-
Bruker offers a wide range of laboratory data management solutions through its portfolio of Arxspan products.
-
Product
EN50155 Managed Ethernet Switch
EKI-9512E-4GMX
-
8 x M12 D-Coded 10/100 Mbps ports + 4 x M12 X-Coded 10/100/1000 Mbps ports, Complies with EN50155 & EN50121-3-2, Operating temperature: -40 ~ 75°C, Operating power input range: 16.8~137.5VDC. Supports X-Ring Pro for rapid and predictable convergence, Supports IXM for fast and easy maintenance, Supports N-Key for quick configuration and backup, M12 connector with IP67 rugged housing.
-
Product
Test Of Hand Pneumatic Tools
-
The measuring system consists of a test site and a control rack. The test site is equipped with a mounting for the test tool with measuring sensors: vibration, torque and speed, as well as a pneumatic regulator, a filter and a powder type brake clutch. The maximum torque test is performed until the rotation is completely stopped. The screen displays both the directly measured maximum torque and the calculated maximum power of this sample. At the end of the test, the results are presented to the operator on the monitor screen.
-
Product
Real-time Visualization and Exploitation Tool
Optice™
-
Textron Systems' Optice™ software is an easy to use real-time visualization and exploitation tool purpose-built to enhance interactions with full motion video as well as other data sources. Optice delivers a series of advanced capabilities that not only enriches the data but helps shorten the time from data acquisition to action. Optice allows your operators and analysts to focus on all the operational support functions within one simple tool. There is no back-end system required, allowing you to increase capabilities while reducing costs.
-
Product
RTXCgen Application and Kernel Configuration Tool
RTXCgen
-
RTXCgen is a host-based configuration tool designed to save you time and effort in setting up and configuring your system—and then managing the kernel footprint at the end of your development. This powerful tool is included for no additional charge as a standard part of the RTXC Quadros RTOS distribution (or as part of the VisualRTXC design tool, if you select that option.)
-
Product
UI Test Tool for Web, Java, Windows, Android & iOS
QF-Test
-
QF-Test is the established tool for professional GUI test automation of desktop, web & mobile applications as well as PDF documents. QF-Test is a low-code GUI test tool that allows you to efficiently create test cases, e.g. using Capture/Replay, without any programming knowledge across platforms on Windows, Linux and macOS. For software developers, Jython, Groovy or JavaScript offer advanced scripting possibilities. Tests can be run automatically via continuous integration tools such as Jenkins and generate detailed log files and XML or HTML reports. Use QF-Test to create robust and stable regression tests for various GUI technologies. QF-Test supports all types of Java GUIs, ranging from Swing (including ULC, JIDE components, CaptainCasa), its successor JavaFX, as well as the Standard Widget Toolkit (SWT) and Eclipse, including plugins and RCP applications. You can also use QF-Test to test dynamic web applications based on Angular, React or Vue.js, for example, including Electron and hybrid applications using JxBrowser, JPro or WebSwing, for example. QF-Test supports native Windows desktop applications created with Win32, .Net, Windows Forms, WPF, Windows Apps. Mobile applications can be tested on real devices or with the Android Studio Emulator or iOS Simulator and Xcode.In addition, you can test automated whether your web application complies with common accessibility standards in just a few simple steps. PDF documents can also be conveniently tested automatically with QF-Test. On the market since 2001, the test tool is continuously being actively developed and is currently used by more than 1,500 companies across 60 countries. Contact us by e-mail at service@qftest.com or get a free trial version at www.qftest.com/en!
-
Product
Impact Tools
D914™ Series
-
The D914™ Series impact tools provide quality terminations on the first punch, helping to achieve the highest quality possible on network installations. They are the only impact tools that combine torque and impact in one tool. They also include a built-in hook and spudger into the handle. Use the hook to remove wires from any style block or to help trace wires. Use the spudger to remove the cross-connect module from the mounting bracket. Quick and easy blade replacement, and extra blade storage available in the handle.
-
Product
Image Analysis & Management System
IA44
-
The IA44 Image Analysis/Management System easily transforms raw data into valuable information that can be communicated with professional results. The combination of powerful image management capabilities and point-and-click simplicity provides a comprehensive solution for users with various levels of expertise.
-
Product
Scalable Industrial Production Tool
Euromax 60
-
The Euromax 60 is a scalable industrial production tool for the manufacturing of back-contact solar panels.
-
Product
Management Systems
-
Centralized system monitoring and management for a constant overview of system functions and significantly reduced administrative workloads.Component status is constantly monitored using standard protocols and administrators are automatically warned of problems. The easy-to-use graphical user interface helps administrators quickly get to the root of any problems.Centralized system configuration and software management reduce the administrative workload and the risk of misconfiguring devices. Rohde & Schwarz provides also has centralized mission planning systems for defense applications, where various military hierarchical levels perform multiple radio system configuration steps.
-
Product
Unified Network Management Solution
-
Motadata Unified NMS offers a highly scalable solution for Service Assurance, Orchestration & Automation, enabling Telco’s to meet their network management objectives. Motadata helps IT Infrastructure teams to execute a set of functions required for planning, allocating, deploying, controlling, coordinating and monitoring their network resources.
-
Product
SQL Inventory Manager
-
View inventory-Know what's where & who owns itAuto-discover to better manage server sprawlView health scorecards to fix potential problemsGet alerts when a server goes down, or space is low
-
Product
Virtualization Manager
-
Virtual machine monitoring and management designed to fix and optimize performance issues
-
Product
Multi-Cloud Management
CloudFlow
-
Cloud security policy and configuration management across the multi-cloud estate.
-
Product
Measuring Management
-
Our test equipment is more than a test-set with a screen. Our application software provides an integrated tool to easily store the measurements at different stages and create a log of what we have done. Each measurement stores all data and settings, including display, markers and calibration.
-
Product
Automotive Test Solutions
-
The testing and simulation systems from this division are used primarily in the automotive and automotive supplier industry. These are, for example, modular function-testing systems and diagnostic tools for automotive ECUs or bus communication systems for a wide variety of electronic components in automotive production. Electromechanical assemblies and entire car seats are also tested to ensure they function
