-
product
3D And 2D Visualization Software
3DViz
The 3DViz software provides intuitive 2D and 3D visualization of high-definition sensor data. Software allows strain or temperature data from an ODiSI system to be visualized directly on a 3D CAD model or a 2D image.
-
product
Sewer Laterals Scanner
ES-38
The ES-38 is designed for scanning laterals from 3 to 8 inches in diameter. Using Electro Scan's proprietary technology, variations of electricity flowing through the pipe wall, associated with distance measurements, are automatically transmitted to Electro Scan's Smartphone application to record and display defect locations and their relative size.
-
product
3D Laser Imager
Vector-DD
The Vector 3D laser imager offers multi wavelength, full waveform data capture, coupled with the flexibility of an all-sky scanner. The Vector-DD is a direct detection (DD) 3D (range, angle, angle) active imager with an all-sky full hemisphere scanner. It employs a nodal point design so that all the lines-of-sight converge to a single point at the instrument*. In addition, two wavelengths can be transmitted so that differential reflectivity information can be derived. The unit is compact and portable and operates from 24V DC.
-
product
Component Test Scanner
Model 13001
Support component test scanningSupport 8 slots for plug-in (removable), up to 320 channels for one unitOption A130007 40 channels scan module, input up to 500VDC for IR test without switchingMax. 8 salve units for multiple scanner (master/slave interface)Support Chroma LCR meterSupport Chroma 3302/3252/11025 turn ration functionSupport 11200 CLC/IR meter for IR testStandard RS-232, GPIB and USB interface13001 can be installed in Chroma Component ATE model 8800Support ICT applications
-
product
Industrial Machine Vision and Fixed Scanners
Zebra Technologies Corporation
Today’s shoppers can purchase at any time from any place, creating tremendous fulfillment pressures that ripple throughout the supply chain. Zebra’s Fixed Industrial Scanning and Machine Vision solutions address it all with flawless automation that empowers you to easily set up, deploy and run the processes that drive your business. Maximize your performance, exceed your potential and delight your customers - with Zebra.
-
product
Solid Optical 3D Measurement Instrument
IF-SensorR25
The IF-Sensor25 is a solid optical 3D measurement instrument for automated form and roughness measurement in production. The sensor is integrated into a production line and delivers you high resolution, repeatable and traceable results when measuring surface characteristics in the m or sub-m range. This resolution can hardly be achieved by conventional 2D solutions or tactile techniques.
-
product
3D Automated Optical Inspection System
EAGLE 3D 8800 SERIES
EAGELE 3D 8800 AOI applies 8-way projection for 3Dmeasurements to all models, minimizing shadow effectserrors and performing 100% 2D&3D examinations simultaneouslyin all FOV areas.
-
product
3D Antennas
A 3D capable printing technology designed to create printed electronics directly on 3D surfaces using modern software controlled digital process.
-
product
3D Measurement
PSD-Array
The PSD array consists of 16 parallel one-dimensional PSD elements on the same chip. By utilizing the triangulation technique the reflection of a laser line or multiple laser spots onto the PSD array will provide information about the contour of the illuminated object. The possibility for simultaneous readout of the 16 elements together with the fast response of each element makes the PSD array suitable for applications like high speed 3D contour measurements and measurements of parallel, moving objects such as cantilevers.
-
product
3D Smart Sensors
Gocator Family
Scan, measurement and control within a single device. Optimize manufacturing processes and improve quality control decisions at production speed with 3D non-contact inspection.
-
product
Areal Confocal 3D Measurement
µsurf
The measuring system of the µsurf-product line enable automated 3D surface measurements of roughness, topography, layer thickness and volume. µsurf-measuring systems are available in different designs: from compact mobile systems and laboratory solutions up to multisensor setups on granite portal for use near production lines.
-
product
Cable Scanner
MI 2014
Cable Scanner is easy to use LAN tester with wide variety of functions for fault finding and troubleshooting on IT cabling connections. TDR facility with adjustable NVP allows determination of distance to the fault or cable length measurement. Acoustic generator combined with a receiver enables pair determination in multi-pair cables.
-
product
FieldMaster 3D
Field analyzer for low-frequency fields, selective and wide-band measurement simultaneously on all three axes. The sensor plates have a high-quality GOLDSCHICHTUNG, so that the calibration is guaranteed as long as possible despite harmful environmental influences.
-
product
Ultrasonic Wafer Scanner
AutoWafer
Installed in more wafer applications than all other automatic ultrasonic testing tools combined, AutoWafer provides a complete, production-ready wafer scanner for wafers from 100mm to 200mm, including multiple sizes in a single batch.
-
product
3D Measurement And Inspection
LOTOS
LOTOS automatic measuring systems can measure the full outer contours or individual areas of any measurement object quickly and precisely, irrespective of the shape, and test them for imperfections. The three-dimensional, non-contact measurement is carried out using optical measurement sensors with accuracy in the μm range. The result is a representation of the measurement object as a 3D model. Powerful, intuitive software allows the measurement results to be assessed extremely quickly.
-
-
product
Scanner Probe
RFS set
The RFS set consits of three passive near field probes designed for the use in a measurement scanner during the development of E-field and magnetic field. They are designed for frequency ranges of 30 MHz to 3 GHz. The probe heads of the RFS set allow for close measurements needed to correctly localize interference sources on an electronic assembly. They document the whole image of the device under test`s near field. The scanner probes have a sheath current attenuation and are electrically shielded. They are connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. They do not have an internal terminating resistance. The measuring signal can be increased with PA 203 or PA 303 preamplifier. On request RFS, LFS and XFS scanner probes can be produced.
-
product
Pressure And Temperature Scanners
The test and measurement group of TE Connectivity (TE) provides data systems based on the electronic pressure and temperature scanners of legacy brand Pressure Systems (PSI). Available in standard designs and custom configurations, our electronic scanners, pressure scanners and temperature scanners can meet the needs of a wide range of industries.
-
product
3D Sensors
Teledyne DALSA offers powerful, innovative 3D sensors combining industry-leading performance with cutting-edge feature sets and value.
-
product
Sewer Pipe Scanner
ES-620
The ES-620 series of Electro Scan products are designed for scanning sewer pipe from 6 to 60 inches in diameter. Two products, designed for direct integration to your existing CCTV Truck include the ES-620 for 6 to 20 inches in diameter and the ES-2060 for 20 to 60 inches in diameter.
-
product
Advanced 3D Automatic X-Ray Inspection
V810 S2EX
V810 is "3D Automatic X-ray inspection System" that corresponds to the double side mounting SMT-PCB that is not able to be checked by a transmission-type X-ray machine. It has the ability to detect a wide range of defects, and It have 100% complete defect detection capability in the Hip-defective.And, it is the inspection machine of world's highest level that combines the ability of the ultra-fast test speed and the lowest false call positives further.
-
product
High Precision 3D Metrology
Ensure zero-defect quality in all product deliveries and boost customer satisfaction: ISRA’s precision metrology systems measure all object and surface properties down to the nanometer level while ensuring the shortest cycle times.
-
product
3D Design
Rapid Design Exploration. Created for design engineering workflows, our intuitive product design software generates a fast user experience. Rapid design exploration includes detailed insight into real-world product performance. Live physics and accurate high-fidelity simulation combine into an easy-to-use interface that supports faster-time-to-market.
-
product
Diode Module Scanners
Scan500
Frothingham Electronics Corporation
The Scan500 scanners are add-on scanners for diode modules, to be used with a tester such as the FEC200.
-
product
OBD2 Auto Repair Intelligent Scanner
Scan 1
Automotive Diagnostics and Publishing
The Scan 1 OBD2 scanner auto repair diagnostic tool is a unique software PC based scan tool, with built-in troubleshooter, PID Analyzer, DTC code videos, PID red-flag feature, advanced graphing, information and more. The PC based scanner software is bundled with all sorts of auto diagnostic and repair help. This OBD2 scan tool and your own oscilloscope makes for a complete auto repair shop solution. If you don't have an oscilloscope, then the Scope 1 is also available.
-
product
3D Building Scanning Services For Existing Conditions
Trusted by industries across USA, Tejjy 3D laser scanning company facilitates high-resolution reality capture of as-built data. Our on-site 3D scanning professionals gather accurate measurement with quality point clouds of as-built condition. We facilitate precision of 4-6 mm approx. in field measurement for renovation, surveying, facility management, digital twin, heritage preservation as per client requirements.
-
product
3D Machine Vision Systems
Whether performing a single profile measurement or scanning an entire surface in 3D, Cognex has the most powerful and robust 3D machine vision tools. Manufacturers in all industries trust Cognex technology to deliver high accuracy surface feature measurements that go beyond the capabilities of 2D machine vision technology.
-
product
CGH & CGH+SNP Microarray Scanners & Equipment
Learn about our selection of CGH & CGH+SNP Microarray Scanners & Equipment for your research and diagnostic workflows. It includes the SureScan Microarray Scanner, the G2565 Series Microarray Scanner accessories and SureScan Scanner accessories including backing slides, hybridization chamber, microarray hybridization oven, hybridization oven accessories, and stabilization & drying solution. The SureScan Microarray Scanner is the foundation of our complete microarray solution that offers outstanding sensitivity and resolution, delivering flexibility to analyze genomics and cytogenetics microarrays. The small footprint of the SureScan Microarray Scanner allows lab space to be optimized while improving the sensitivity and maintaining the broadest dynamic range. Read on to find more about our microarray scanners.
-
product
3D Inspection Service
The reference data may come in the form of a table, with values at specific points or features, a cad model, or 3d scan. 3D inspection services may require datum measurements, where the part to be inspected is located in a fixture that is specifically designed to orient the part by an ordered method. In some cases, the part may have features that are designed specifically to be referenced by datums, if no functional feature of the part provides a clear reference.
-
product
3D Optical Surface Profiler
NewView™ 9000
The NewView™ 9000 3D optical surface profiler provides powerful versatility in non-contact optical surface profiling. With the system, it is easy and fast to measure a wide range of surface types, including smooth, rough, flat, sloped, and stepped. All measurements are nondestructive, fast, and require no sample preparation.
