Product

High Voltage Probe Meters

-

Shanghai Beha Electronics Co., Ltd.

Shanghai Beha Electronics Co., Ltd.

*High voltage test probe *is a high voltage probe that is used with Oscilloscope● Attenuation Ratio: 1000:1*Measuring range: AC 20KV/DC 30KV

Product

Palladium Alloy & Beryllium-Copper Probe Needles

-

Advanced Probing Systems, Inc.

Advanced Probing Systems, Inc.

APS has been providing high precision, high volume Tungsten Electrosurgical Needles for over 20 years in Colorado where the product was invented. Our unique Chemical machining process can produce polished electrosurgical needles for diameters from .177mm to .711mm. Overall lengths produced from 25.4mm to 38mm. Tip sizes range from .001mm to .115mm.

Product

Flying Probe Testers

-

SPEA S.p.A.

SPEA S.p.A.

SPEA’s Flying Probe Testers help manufacturers of printed circuit boards to deliver top-quality products in the fastest time-to-market, avoiding fixture cost and increasing accessibility when compared to bed-of-nails testers.

Product

Open Source Oscilloscope

Smartscope

-

LabNation

Smartscope - LabNation

Everything you need to boost the development of your own electronics devices is included in this package:the SmartScope with 1M sample buffer2 analog probesthe digital probe cablea miniB USB cable to connect to your pc or laptop

Product

AMIDA 5000 Tester

-

Amida Technology, Inc.

Amida Technology, Inc.

AMIDA 5000 is a high-end performance test system, combining analog, mixed-signal and logic with the latest test solutions. High pin count - as many as 512 smart multi-function pinframes and 128 sites. Ability to provide cost-optimized test solutions for a variety of consumer components in power management and mobile device components. This system has a higher number of parallel tests and a higher level of capability. This series of test systems provides a powerful test combination with high-speed hardware and software integration. The 5000 series test system is the best analog, mixed signal, digital IC, PA test system for engineering verification and mass production. It can be easily connected to all well-known wafer probing machines and sorters, and also supports parallel test functions. The 5000 series meets customers' needs for high-precision, high-resolution, high-reliability, user-friendly, and low-cost testing and measurement of test systems.

Product

Test Port Cable, 1 Mm

11500L

-

Keysight Technologies

11500L - Keysight Technologies

Connect test ports to devices, fixtures, or probe tips with this 24-cm cable featuring a return loss of 16 dB minimum.

Product

Temperature Measurement Products

-

Cole-Parmer Instrument

Cole-Parmer Instrument

Temperature is one of the most important process variables in the industry! There are numerous options for measuring temperature—all depending on your desired temperature range, accuracy, features, and budget. So whether you are measuring temperature in a lab, in the rugged outdoors, on the plant floor, or in a hazardous area, let us supply you with the temperature measurement and temperature control products you need. Our extensive portfolio ranges from contact and noncontact (infrared) temperature meters, to digital and glass thermometers, to custom temperature probes and sensors. LESS -

Product

Injection Transformer

J2100A

-

PICOTEST Corp.

J2100A - PICOTEST Corp.

The injection transformer is presently the prevalent method for connecting the network analyzer to the circuit being tested, and is primarily used for control loop stability measurements. The goal of the transformer is to inject a signal into the control loop being measured, without impacting the performance of the loop. In order to accomplish this to a reasonable degree, The transformer is isolated and therefore is capable of floating on a high voltage, such as a Power Factor Corrector (PFC), which is often close to 400VDC. Measuring voltages that exceed the voltage rating of the FRA inputs require attenuation probes.

Product

Temperature and Humidity Transmitter

T3319-2

-

COMET SYSTEM, s.r.o.

T3319-2 - COMET SYSTEM, s.r.o.

Humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

MANUAL TEST FIXTURE KITS

SERIES 5590

-

Test-X Fixture Products

SERIES 5590 - Test-X Fixture Products

Built with unique design features: Ease of assembly and disassembly All side panels are removable Side panel material is delrin for easy machining for connectors, switches etc.Light weight and durable construction2" Between Probe plate and lid plate allowing more room for tall board components

Product

High Voltage Differential Probe

ADF25A

-

Link Instruments

ADF25A - Link Instruments

Permits conventional grounded oscilloscopes to be used for the display and measurement of multiple floating signals with high common mode voltages

Product

2.5mm Test Rod Test Probe Needle

CX-4C

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-4C - Shenzhen Chuangxin Instruments Co., Ltd.

2.5mm test rod test probe needle Used to verify the protection of persons against access to hazardous parts.

Product

Mini Appliance Checker

880 AT

-

Standard Electric Works Co., Ltd

880 AT - Standard Electric Works Co., Ltd

● The 880 AT is a simplified Version of an appliance tester which use low voltage and low current to perform it's checks.● Application Example The appliance is plugged into the mini appliance checker, then the probe make contact with the protective conductor.● Other appliance checking Washing Machine Toaster Iron Dish Washer Stove

Product

JTAG Probe

MAJIC

-

Siemens EDA

MAJIC - Siemens EDA

MAJIC (Multi-Architecture JTAG Interface Controllers) JTAG Probes are small, stand-alone, processor-based systems that provide an intelligent connection between host-based development tools (the debugger) and an embedded processor via its standardized JTAG debug logic IP macrocell.

Product

Temperature and Humidity Regulator

H3331

-

COMET SYSTEM, s.r.o.

H3331 - COMET SYSTEM, s.r.o.

Relative humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. Three two-state inputs.

Product

High Voltage Probe

HVP-08

-

PINTEK Electronics

HVP-08 - PINTEK Electronics

*Mini Type *8KV/40MHz *1:1000 *100MΩ//3PF

Product

6 GHz ProBus2 Differential Probe with Dx10-SI Solder-In Tip

D610-A-PB2

-

Teledyne LeCroy

D610-A-PB2 - Teledyne LeCroy

- Choice of 4 GHz or 6 GHz bandwidth models- Up to 5 Vpk-pk dynamic range with low noise- ±3 V offset range- Low loading and high impedance for minimal signal disturbance- Ideal for DDR2, DDR3, LPDDR2- Deluxe soft carrying case- Innovative QuickLink architecture- Wide variety of tips and leads-- Solder-In Lead-- Optional Positioner (Browser) Tip-- Quick Connect Lead-- Square Pin Lead-- HiTemp Solder-In Lead

Product

RF Coaxial Probes & Probe Positioner

-

Fairview Microwave Inc.

Fairview Microwave Inc.

Fairview Microwave’s line of coaxial RF probes and RF PCB probe positioner are ideal for use with chip evaluations, signal integrity measurements, coplanar waveguide, substrate characterization, gigabit SERDES and test fixture applications. The RF coaxial probes provide return loss better than 10 dB and a maximum operating frequency of 20 GHz. The probes have a 3.5mm female interface, a pitch of 800 or 1500 micron and they can be cable-mounted. They feature gold-plated contacts and can be used by hand, with or without a probe positioner. Compliant coaxial GSG (or GS) pogo pins allow for a broad range of probing angles. The RF PCB probe positioner can hold coaxial probes, has articulated joints and delivers multi-axis positioner control. This positioner also boasts a magnetic mounting plate with on-off positioner switch.

Product

Advanced Stand-Alone AFM

SmartSPM

-

HORIBA, Ltd.

SmartSPM - HORIBA, Ltd.

The SmartSPM Scanning Probe Microscope is the first 100% automated system that offers its cutting-edge technology of ultra-fast, metrological and high-resolution measurements for the most advanced materials research at the nanoscale in all AFM and STM modes. With the SmartSPM zooming in from large up to 100 µm overview scans down to atomic resolution has become a reality. Its design has been specially developed to be capable of being seamlessly integrated with optical spectroscopies (SNOM, Raman, Photoluminescence and TERS/SERS techniques).

Product

Photometric Radiometric Transmitters

HD2021T6 / HD2021T7

-

Senseca

HD2021T6 / HD2021T7 - Senseca

The transmitters allow converting the photometric quantity “equivalent veiling luminance” – HD2021T7 – or a photometric quantity Luminance (cd/m2) – HD2021T6 – into a current (4…20 mA) or a voltage (0…10 V) signal according to the version chosen. If the acquisition station is far from the probe (>50m), it is necessary to use the current output version.The probe is used for the control of street lighting, in particular, the measurement of equivalent veiling luminance is essential to determine the threshold luminance at the entrance of the tunnels (UNI 11095:2011).