Predictive Analysis
See Also: Data Analytics, Predictive Analytics, Simulation Software, Perception
-
Product
Spectrum Analysis, Up To 43.5 GHz
S930904B
-
The S930904B spectrum analysis adds high-performance microwave spectrum analysis to the N522xB/N523xB/N524xB PNA network analyzer family up to 43.5 GHz.
-
Product
Time-Domain Analysis
S95010B
-
Measure the time-domain response of a device; transform frequency-domain data to the time domain or time-domain data to the frequency domain
-
Product
Complete Graphical Power Quality Analysis System
PK5064-PRO+
-
The PK5064-PRO+ is the top choice for comprehensive power quality studies, energy audits, load studies, harmonic analysis, and more. Wide-range flexible current probes allow you to get into tight and confined spaces, wrap around large conductors, and measure almost any AC circuit that comes your way.
-
Product
Spectrum Analysis Up To And Beyond 125 GHz
S93094B
-
The S93094B has all of the capability of the S93090xA spectrum analyzer application with an upper frequency limit determined solely by the broadband or banded millimeter-wave frequency extenders used in the system.
-
Product
High Frequency Antenna Analysis Software
XGtd®
-
XGtd is a general purpose ray-based electromagnetic analysis tool for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas, and predicting radar cross section (RCS). It is ideally suited for applications with higher frequencies or very large platforms where the requirements of a full physics method may exceed available computational resources.
-
Product
Real-Time Spectrum Analysis up to 160 MHz, Optimum Detection
N9030A-RT2
Signal Analyzer
Capture elusive signals as short as 3.57 with 100% POI and a complete set of advanced triggers View signal dynamics with displays: digital and swept density, spectrum, spectrogram, power vs. time, gap-free real-time analysis, and more Maximize your investment by adding RTSA to your PXA at a fraction of the cost of a dedicated solution Easily integrate the 89600 software and thoroughly analyze complex signals Extend RTSA measurements to millimeter-wave range with external mixers Industry-leading 3 year warranty Every spec verified, adjustments included Lock in support & peak performance from the start
-
Product
Microwave Furnace for Ash, Bone Content & Carbohydrate Analysis
Phoenix
-
The Phoenix line of microwave muffle furnaces offers unmatched versatility and speed in a rugged, easy-to-use system. Choose from two configurations and a variety of options!
-
Product
DDR5 Protocol Debug And Analysis Solution
U4970A
-
The DDR5 solution bundle provides a systemized hardware, probing, and software solution for DDR / 2 / 3 / 4 / 5 protocol debug, compliance validation, and analysis.
-
Product
Dynamic Signal Analysis
-
m+p Analyzer is a fully integrated solution for dynamic signal measurement, analysis and advanced reporting of all noise and vibration, acoustics and general dynamic signal applications. Comprehensive time and frequency analysis is available with both online and offline data processing. Complete with advanced application wizards the m+p dynamic signal analyzer makes light work of gathering data, displaying results, performing specialized analysis and generating customer ready reports – all within one user interface. m+p Analyzer is designed for noise and vibration applications in the field and in the lab.
-
Product
PXI Bluetooth Signal Generation and Analysis
Test Toolkit for Bluetooth™
-
Start taking faster Bluetooth measurements with PXI, the most cost-effective, flexible, and capable platform for wireless device test. Keep up with the latest Bluetooth standard developments with free upgrades of the Test Toolkit for Bluetooth. Gain greater confidence in your Bluetooth design's performance and increase test coverage with a flexible toolkit that offers fine control of the generated Bluetooth waveforms and generates accurate measurement results.
-
Product
Failure Analysis
-
A partial list of our state of the art test equipment, applicable to these testing disciplines, will include the following: Two Scanning Electron Microscopes with EDS (SEM/EDS) Three Differential Scanning Calorimeters (DSC) Three Thermogravimetric Analyzers (TGA) Three Thermo Mechanical Analyzers (TMA) One Dynamic Mechanical Analyzer (DMA) Two Real-Time Fluoroscopic X-ray Systems, including a Microfocus System One Fourier Transform Infrared Microscope (FTIR) (capable of identifying a single particle of an unknown material) Two Ion Chromatographs (IC) (capable of identifying ionic impurities in ppm)
-
Product
Device Parameter Analysis
-
bsw TestSystems & Consulting AG
The complexity of DC Parametric Characterisations has significantly increased with the level of miniaturisation in the semiconductor industry. The demand is not only on the precision of the measurements. New measurement methods have emerged to gain insight into phenomena previously unknown or only of marginal relevance. One example is "Pulsed IV" which is now widely in use. The modular concept of the Keysight B1500A allows users to tailor their instrument exactly to their needs. Flexible upgrades ensure the investment for many years. Together with bsw AG you will get an optimum solution for your application. Our experts provide not only support for the instrument itself but have also working knowledge of all the solutions surrounding it. This includes Cabeling and Adapters, Fixturing for packaged Parts and of course Wafer Probing. We help customers from replacements of broken or worn-out parts to planning and deployment of turn-key-systems.
-
Product
Test Analysis for Land Seismic Systems
Testif-i Land
-
Testif-i Land is an independent, powerful and cost effective software suite that allows you independently process instruments, source and receiver tests to confirm that the equipment is performing correctly and within specification. The software includes modules to perform comprehensive analysis of vibrator wireline similarity test data. Analysis includes a harmonic intensity plot which can highlight problems such as sub-harmonics which may not be seen on numerical results. Geophone pulse tests can be analysed using the receiver response module and test data from third party geophone testers can be graphed and statistics produced for ease of interpretation.
-
Product
ESPI Analysis Application
TP601010
-
First released by Intel in June 2013, the Enhanced Serial Peripheral Interface (“eSPI”) is designed as a replacement for the Low Pin Count (“LPC”) bus. eSPI supports communication between Embedded Controller (EC), Baseboard Management Controller (BMC), Super-I/O (SIO) and Port-80 debug cards. eSPI was available in the Sky Lake chipset (2015) and is available in the Kaby Lake [current] chipset. Cannonlake will support eSPI and is slated for release the second half of 2017. Icelake is scheduled for release in 2019 and it will mark the first chipset when eSPI becomes mandatory.
-
Product
Automated Analysis Software
RevospECT Pro
-
RevospECT Pro is the industry’s first commercially available high-powered, adaptable and scalable automated analysis system. It provides end users the power and control to perform comprehensive automated analysis of eddy current data. RevospECT has a proven track record in the field and meets rigorous industry standards for flaw analysis from bobbin, rotating and array inspection techniques. Once configured for an inspection, RevospECT Pro will process and analyze data at an extremely fast rate utilizing its robust distributed processing power, often outpacing data acquisition rates and generating results that can be verified immediately by the reviewing data analyst. More importantly than system speed is the consistency of the results that are delivered using computer-aided analysis.
-
Product
Real-time Spectrum Analysis up to 510 MHz, Optimum Detection, Multi-touch
N9030B-RT2
Signal Analyzer
See, capture, and understand elusive signals as short as 3.57 s with 100% POI and a complete set of advanced triggers View signal dynamics with integrated real-time displays Maximize your investment by adding RTSA at a fraction of the cost of a dedicated solution Easily integrate the 89600 software and thoroughly analyze complex signals Industry-leading 3 year warranty Every spec verified, adjustments included Lock in support & peak performance from the start
-
Product
Embedded Analysis Software for the 2000 X-Series
D2000GENB
-
Test and debug I²C, SPI, RS232/422/485/UART designs with triggering, decoding, and pass / fail mask limit testing.
-
Product
Spectrophotometers, Laboratory And Analysis Systems
-
Instruments, accessories and calibration standards for in-situ and ex-situ optical transmission, reflection, absorption, and photoluminescence measurements
-
Product
Video Analysis Software
BrainChip Studio
-
BrainChip Studio aids law enforcement and intelligence organizations to rapidly search vast amounts of video footage and identify patterns or faces. A result of over 10 years of R&D, it uses an artificial intelligence (AI) technology called a spiking neural network (SNN), a type of neuromorphic computing that simulates the functionality of the human visual tract. Because faces have unique identifying features, the software includes advanced facial detection, extraction and classification algorithms. The SNN technology enables BrainChip Studio to work on low-resolution video and requires only a 24x24 pixel image to detect and classify faces.
-
Product
Leak Analysis
Hiden LAS
-
The Hiden LAS system is designed to analyze the leak rate from sealed packages, from a quality control or research and development perspective.
-
Product
Portable Data Acquisition & Analysis System
LapCAT III
-
# 4, 8, or 16 channels# 1 MHz aggregate 12 bit sampling. Resolution is 0.024% of full scale# 13 recording durations, user selected: 132 msec to 1320 sec# Digital Triggering from any channel, with +/- slope or window# 6 full scale gain ranges, user selected: 0.4, 1, 2, 4, 10, and 20 volts full scale - with a 10mV/g accelerometer these equal 40g, 100g, 200g, 400g 1000g and 2000g full scale - higher or lower ranges by different sensor selection
-
Product
Image Analysis Software
Metallurgy Plus
-
International Biological Laboratories
his software can be used in Steel plants, Metal forging industry, Oil & gas industry ,Material Science, Mineralogy - metal and metal strength analysis Cement (Klincker) quality control and where ever Metallurgical microscope are used in .This Package is very useful Educational Institutions and ALL MATERIAL SCIENCE TECHNOCRATS AND METALLURGISTS.
-
Product
Quadrupole Mass Spectrometer for Residual Gas Analysis
RGA Series
-
Systems for the examination of components present in a vessel or evolved from a process. HALO RGA – for residual gas analysis. 3F Series RGA – triple filter mass spectrometers for analytical applications. 3F-PIC – pulse ion counting detection for fast event studies. Measures the concentration of gases and vapours in real time.
-
Product
Image Analysis Micrometers
-
For calibrating and analyzing microscopy measurement systems, the IAM line of Image Analysis Micrometers are perfectly suited. Calibrated to NIST Standards, and imaged with the best line edge quality in the industry, the IAM series is a diversified line of slides that function in areas of color calibration (IAM-9C), Optical Magnification, Frame Distortion, and other applications. Custom features, substrates, sizes and designs are available as custom solutions.
-
Product
Gas Analysis
HPR-90
-
The HPR-90 automated package cracking analysis system is a complete system optimized to analyse gas within sealed volumes such as light bulbs.
-
Product
Dynamic Imaging particle analysis system
FlowCam® Biologics
-
Yokogawa Fluid Imaging Technologies, Inc.
Detection & measurement of protein aggregates and other paticulates Formulation research & development QC diagnostics Stability studies and shelf-life simulation
-
Product
Spectrum Analysis For P50xxB Up To 26.5 GHz
S970905B
-
Add spectrum analysis to your P50xxB Streamline series vector network analyzer
-
Product
Material Analysis Instrument
-
Thermogravimetric Analysis measures the amount and rate of change in the weight of a material as a function of temperature or time in a controlled atmosphere.





























