Product

M-TAP Fiber Test Tap

-

Maxcom Inc.

Maxcom Inc.

The Maxcom Fiber Tap (M-TAP) is a portable optical test tool designed to minimize customer downtime. Two Splitters/Taps One Portable Device 80/20 split ratio 50/50 split ratio

Product

Single Fiber Strength Tester

TB400C

-

TESTEX Testing Equipment Systems Ltd.

TB400C - TESTEX Testing Equipment Systems Ltd.

Single Fiber Strength Tester, suitable to test the tension strength and elongation of chemical fiber, cotton, wool, ramie, silk, glass fiber, fine metallic thread, etc.

Product

Hybrid Raman/Er-doped Fiber Amplifier

HFA5000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HFA5000 - Hangzhou Huatai Optic Tech. Co., Ltd.

1. Erbium-doped Fiber Amplifier, due to multiple cascades and the accumulation of noise caused by spontaneous emission, will reduce the system CNR greatly and thus it will limit the transmission capacity and distance of the system. Raman Fiber Amplifier (RFA) is a newly designed fiber amplifier based on Stimulated Raman Scattering (SRS) effect. It is considered as the core technology of new generation DWDM fiber over-long communication. Compared with Erbium-Doped Fiber Amplifier, Raman amplifier has the advantage of low Noise Figure (NF), wider gain bandwidth, flexible gain spectral region and stable temperature. It is the only device that can operate in 1300~1600nm.

Product

Digital Fiber Sensor for Leak Detection/Liquid Detection Fibers Only

FX-301-F7/FX-301-F

-

Panasonic Industrial Devices Sales Company of America

FX-301-F7/FX-301-F - Panasonic Industrial Devices Sales Company of America

The FX-301-F7 is a dedicated amplifier for the Leak Detection Fiber FD-F71.The FX-301-F is a dedicated amplifier for the Liquid Fiber FT-F93.The main and sub unit are identical which makes these Fiber Sensors very easy to operate and maintain.

Product

- RS-422 to Fiber Optic Converter

Model 272A

-

Telebyte, Inc.

Model 272A - Telebyte, Inc.

FEATURES: Data Rate to 2.5 MBPS; Full Duplex TD and RD; ST Connectors; Extends RS-422 Network up to 2 km (6,600 ft). The Model 272A provides the capability of performing an interface conversion between full duplex, RS-422 signals and their equivalent for fiber optic transmission.

Product

Fiber Optics

-

TE Connectivity Ltd.

TE Connectivity Ltd.

When it comes to capacity and throughput, no other physical media can come close to matching fiber optics. Whether it’s a component, system, or a network, TE can help you deliver more bandwidth with our fiber optics solutions and products.

Product

Multi-Mode Test Transmitter to 6 GHz

WTX-610 iLLUMINATOR

-

Consultix

WTX-610 iLLUMINATOR - Consultix

Wideband operation up to 6 GHz allows the iLLuminator to address all your future needs of signal generators / test transmitters even over unlicensed bands for LTE-U and LAA or the CBRS Band. These features combined with the ultra-portable handheld form factor and innovative touch interface for maximum ease of use make the WTX-610 iLLuminator a convenient choice for laboratory users as well as field applications such as DAS & Small Cells radio planning and testing.

Product

C-Band Separate Dispersion Compensation Raman Fiber Amplifier

DRA5228/F

-

Hangzhou Huatai Optic Tech. Co., Ltd.

DRA5228/F - Hangzhou Huatai Optic Tech. Co., Ltd.

Raman Fiber Amplifier (RFA) utilizes the optic gain in the Stimulated Raman Scattering (SRS) in the optical fiber and realizes the amplification of the signal optic. FRA, with very low equivalent noise and a wide gain scope, can further widen the gain bandwidth by adopting multi-wavelength optical bump, which represents the development direction of the new optical fiber amplifier.

Product

Diode Laser Systems and Fiber Lasers

-

Coherent Corp.

Coherent Corp.

The HighLight Series of direct-diode systems and fiber lasers are robust and easy-to-use. These systems have a proven track record in industrial materials processing applications.

Product

GPS over Fiber

-

CCI

CCI

*High Dynamic Range GPS to Fiberoptic Transmitter and Fiberoptic to GPS Receiver*Compact NEMA rated outdoor Fiber Transmitter provides +5VDC Bias for GPS Antenna LNA*Rack mounted Fiber Receiver provides 8 RF outputs and integrated monitoring and alarming*Cost effective solutions for distribution of GPS signal over long distance

Product

UFP series High Sensitivity Fiber Optic Alignment Stages

UFP

-

ZOLIX

UFP - ZOLIX

Model: UFP1A-LFeatures:• The linear stage has both coarse adjustment and fine adjustment, sensitivity is much better than 0.5um• The rotation stage sensitivity is much better than 23.4" • High stability

Product

Dual Zipcord Fiber Buffer Thermal Stripper - TFS-900

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

TFS-900 900um buffer thermal stripper design small, lightweight, easy to use and reliable, longitudinal peel, peel force is small, the high quality of stripped fiber; blade durable and easy to replace, using linear bearing guide and thermal stripping to ensure no damage to the fiber, easy to strip coating, stripping speed and other characteristics. With the fixture using the strip dual core optical fiber

Product

Optical Fiber 1×25 Switch

OFSW - 1 × 25

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 25 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×25 is a 1×25 prism optical switch. It can support 1 optical fibers input and 25 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Digital Fiber Sensor

FX-410

-

Panasonic Industrial Devices Sales Company of America

FX-410 - Panasonic Industrial Devices Sales Company of America

This dual display digital Fiber Sensor is unique with its manual threshold value setting. Just "Look" and "Turn" simple, easy-to-use Fiber amplifier. The incident light intensity and threshold values can be checked at the same time with operation needed. In addition, no complex mode settings are needed when the values are adjusted.

Product

aeroPULSE Ultrafast Fiber Lasers

-

NKT Photonics A/S

NKT Photonics A/S

aeroPULSE is our ultrafast fiber laser platform. Robust, industrial, and available in both pico- and femtosecond flavors.

Product

Fiber Optical Switch Tray To 16x16 Ports

SERIES 6000 MULTIMODE

-

Polatis, Inc.

SERIES 6000 MULTIMODE - Polatis, Inc.

The Series 6000 Multimode switch is designed to meet the needs of the most demanding component, subsystem and system test applications. All-optical switching allows test equipment connections to be fully automated and controlled remotely 24/7 via software from virtually anywhere in the world.

Product

Fiber Fusion Splicer

KL-500

-

Hangzhou Softel Optic Co., Ltd.

KL-500 - Hangzhou Softel Optic Co., Ltd.

Fusion Splicer

Product

Aerial Fiber Optic Cable

-

AFL

AFL

AFL offers a complete portfolio of fiber optic cable, supporting hardware and compression accessories that are designed to meet the most demanding transmission and distribution environments. As the leading world manufacturer of fiber optic cable, AFL is uniquely positioned to provide a full line of all-dielectric self-supporting (ADSS) aerial cables and Optical Ground Wire (OPGW) as well as supporting hardware and accessories.

Product

Fiber Optic Sensor Systems

-

Fraunhofer Institute for Telecommunications

Fraunhofer Institute for Telecommunications

Fiber-optic and photonic measuring systems open up innovative measuring and control technology concepts for a wide variety of applications. They play a major role in optimizing energy efficiency and are important technological innovation drivers for new and future-oriented markets.In the Department of Fiber Optic Sensor Systems of the Fraunhofer Heinrich Hertz Institute, the focus of application-oriented research is on the development of a new generation of photonic sensors. These are characterized by extreme miniaturization, high network and communication capability as well as extremely low power consumption or even a self-sufficient power supply.In the Department of Fiber Optic Sensor Systems at the Fraunhofer Heinrich Hertz Institute is focused applied research on the development of a new generation of photonic sensors. These are characterized by extreme miniaturization, high network and communication skills as well as an extremely low power consumption, or even a self-sufficient energy supply.

Product

Fiber Stiffness Tester

DRK023B

-

Shandong Drick Instruments Co., Ltd.

DRK023B - Shandong Drick Instruments Co., Ltd.

Used to determine the bending properties of various fibers.

Product

Automatic Fiber Jacket Stripping Machine - FBT-3000

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

The FBT-3000 automatic fiber peeling machine is a new type of optical cable end processing equipment, which is based on the eagerness of optical fiber connector manufacturers to improve production efficiency and reduce the skilled manual emergence of optical cable end processing equipment. In order to solve the problem that the skin layer of optical fiber is usually peeled manually with wire peeling pliers, and the artificial denudation is low in precision, low in working efficiency and low in product quality.

Product

4 Serial Communication Channels, Multi-Mode Programmable, Isolated

SC2

-

North Atlantic Industries

SC2 - North Atlantic Industries

Module SC2 supports intelligent, full duplex, independent, multi-channels that can be individually software-configured for either RS-232C, RS-422, RS-485, RS-423 (w/data and/or clk bit inversion for MIL-STD-188C unbalanced interface support), or synchronous or asynchronous communications.

Product

Fiber Cleaver

CARY-C500

-

UC Instruments, Corp.

CARY-C500 - UC Instruments, Corp.

The CARY-F600H optical fiber cleaver easy to use, convenient, rotating blade, no positionlimited, high-precision cutting. Optical fiber cleaver light weight. Cleave angle: < 1 degree .Replaceable blade cleave blade with 16 cleave spots.