SCSI
"Small Computer System Interface" defines a communication standard for connecting peripheral devices and thier controllers to a microprocessor.
See Also: Parallel Interfaces, UFS
-
Product
PXI Dual 18 Channel MUX, 96-Pin SCSI Connector
40-735-912-S1
Multiplexer Module
The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces. The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. The 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices. The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.
-
Product
Cable Assy 68-Pin SCSI Micro-D M/M 2m
40-970-068-2m-MM
Cable Assembly
The 68-Pin SCSI Style Micro-D Cable Assembly is constructed from 7/36 (28AWG) Copper Wire with Polypropylene insulation. Metal Spring Latches are provided to secure the connectors to their associated products.
-
Product
68-Pin VHDCI Male to 68-Pin SCSI Female, Twisted Pair, Shielded Multifunction Cable
192061-01
Multifunction Cable
SHC68-68-EPM Shielded Cable, 68 D-Type to 68 VHDCI Offset, 1 m
-
Product
SCSI-100 To 2*SCSI-50 Shielded Cable, 2m
PCL-10251-2E
-
SCSI-100 to 2*SCSI-50 Shielded Cable, 2m
-
Product
Cable 96-Pin Micro-D Female to Unterminated, Tinned Ends, 1m
A096SFR-T-5A100
Cable Assembly
The 96-Pin SCSI Style Micro-D to Unterminated Cable Assy is constructed from 28 AWG Twisted Pair Tinned Copper wire with Polyolefin insulation. Crosstalk is minimised. Wires are colour coded for easy connection. Metal Spring Latches are provided on the 96-Pin connector.
-
Product
68-Pin Micro-D Male Solder Bucket
40-962A-068-SB-M
-
This connector is designed to allow users to directly terminate with soldered connections to the 68-Pin SCSI Style Micro D connector. Pickering Interfaces recommends the use of purchased cable assemblies for applications where most or all of the contacts are in use.
-
Product
Compact PCI Connector Board
cPCI-J2-SCSI
-
Ribbon cable is used between the rear IO and SCSI connector. The lengths are reasonably well matched. The cable is short. The design is intended for lower speed IO - 10 MHz and below. Above 10 Mhz there may be some attenuation.
-
Product
Cable 96-Pin Micro-D Female to Unterminated, Tinned Ends, 0.5m
A096SFR-T-5A050
Cable Assembly
The 96-Pin SCSI Style Micro-D to Unterminated Cable Assy is constructed from 28 AWG Twisted Pair Tinned Copper wire with Polyolefin insulation. Crosstalk is minimised. Wires are colour coded for easy connection. Metal Spring Latches are provided on the 96-Pin connector.
-
Product
Cable 100-Pin Micro-D Male to Unterminated, Cut Ends, 0.5m 2-56 UNC Screwlocks, Metal Shell
A100SMR-C-9A050
Cable Assembly
This 0.5m long male to unterminated 100-Pin SCSI Style Micro-D Cable Assembly is suited for direct connection to various products using the 100-Pin connector. It is constructed from 100-Pin twisted pair cable with varying left and right hand lays to minimise crosstalk. The Cable is colour coded to ensure easy connection. Screwlocks are provided to secure the SCSI connector to its associated product.
-
-
Product
68-Pin SCSI Micro-D M to 2x34 1m
40-971-068-1m-MF
Cable Assembly
The 68-Pin SCSI Style Micro-D Cable Assembly is constructed from 2x34-Pin Twisted Pair cable with PVC insulation, terminating with 2x34-Pin polarised IDC connectors. Strain relief is provided via a metal spring latch on the 68-Pin connector.
-
Product
68-Pin VHDCI Male to 68-Pin, Female SCSI, Twisted Pair, Basic Shielded Multifunction Cable
191945-02
Multifunction Cable
SHC68-68, Twisted Pair Cable with Basic Shielding, 2 m
-
Product
High Density 68 pin
HDEterm68
-
The high density 68 pin SCSI II/III connector is being used for purposes other than SCSI interfaces because of board and front panel space limitations. For example in the PMC environment the SCSI connector provides an excellent size and pin count for the front panel space allowed. The SCSI connector while dense, is not easy to connect to with wiring intended to go to multiple locations
-
Product
SCSI-100 To 2*SCSI-50 Shielded Cable, 1m
PCL-10251-1E
SCSI Cable
SCSI-100 to 2*SCSI-50 Shielded Cable, 1m
-
Product
96-Pin Micro-D Connector Block, Female With Screwlocks
40-965-096-F
SCSI Female Connector Block
This connector block provides a simple method of connecting to 96-Pin SCSI Style Micro-D connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. The metal shell includes an internal insulation barrier under the carrier board.
-
Product
SCSI-68 Shielded Cable
PCL-10168
-
Weight :240gDouble-shielded cable with SCSI-II 68-pin male connectorInsulated half pitch 68pin copper alloy gold plated male connector with thumb screw34 twist pairs tinned and strand copper wire with drain wireAluminum/Mylar foil and braided copper double-shielded cableP.V.C. jacketUL 2919 approvedColor :Grey
-
Product
Cable Assy 68-Pin SCSI Micro-D M/F 0.5m
40-970A-068-0.5m-MF
Cable Assembly
The 68-Pin SCSI Style Micro-D Cable Assembly is constructed from 7/36 (28AWG) Copper Wire with Polypropylene insulation. Metal Spring Latches are provided to secure the connectors to their associated products.
-
Product
100-Pin Micro-D Connector, Male, Ribbon Cable, 2-56 UNC Screwlocks, Metal Shell
C100SMR-1CR-6A
Ribbon Cable
This accessory is designed to allow users to directly terminate a cable to the connector. It is difficult to terminate cable to the 100-Pin SCSI Style Micro-D connector because of the high density and fine pitch. Pickering Interfaces recommends the use of purchased cable assemblies for applications where most or all of the contacts are in use.
-
Product
Cable Assembly, Receiver, TriPaddle, 20", 68-Pin Male SCSI
540118050103
Cable Assembly
Cable Assembly, Receiver, TriPaddle, 20", 68-Pin Male SCSI
-
Product
Cable Assembly, 68 Pin Female SCSI (Thumb Screws), to 68 Pin Male SCSI (Spring Latch), 18"
515109119
Cable Assembly
Cable Assembly, 68 Pin Female SCSI (Thumb Screws), to 68 Pin Male SCSI (Spring Latch), 18"
-
Product
68-Pin SCSI-II Female to 68-Pin SCSI-II Female, D-Type Shielded, 2m, Multifunction Cable
185262-02
Multifunction Cable
Type SH68-68-S, 2 X 68-POS .050 Series D-Type Shielded, 2 m
-
Product
68-Pin SCSI Micro-D F to 2x34 Ribbon 2m
40-971-068-2m-FF
Cable Assembly
The 68-Pin SCSI Style Micro-D Cable Assembly is constructed from 2x34-Pin Twisted Pair cable with PVC insulation, terminating with 2x34-Pin polarised IDC connectors. Strain relief is provided via a metal spring latch on the 68-Pin connector.
-
Product
Mini-SCSI-100 Shielded Cable, 3m
PCL-101100SB-3E
SCSI Cable
Mini-SCSI-100 Shielded Cable, 3 m
-
Product
Cable Assembly, Receiver, QuadraPaddle, 36", 100-Pin Male SCSI
540009010240
Cable Assembly
Cable Assembly, Receiver, QuadraPaddle, 36", 100-Pin Male SCSI
-
Product
Cable Assembly, Receiver, TriPaddle, 36", 68-Pin Male SCSI
540007010203
Cable Assembly
Cable Assembly, Receiver, TriPaddle, 36", 68-Pin Male SCSI
-
Product
96-Pin SCSI Micro-D Right-Angle PCB
40-963-096-RM
-
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
96-Pin Male SCSI to 96-Pin Female SCSI Switch Cable, 1m (protected)
150579-01
Switch Cable
SH96F-96M-RES Cable for NI SwitchBlock (100 ohm protection), 1m
-
Product
100 Pin Micro-D Cable, Male to Male, 1m 2-56 UNC Screwlocks, Metal Shell
A100SMR-100SMR-9A100
Cable Assembly
This 1m long male to male 100-Pin SCSI Style Micro-D Cable Assembly is constructed from 7/36 (28 AWG) Tinned Copper twisted pair wiring with Polyolefin insulation to minimise crosstalk. Screwlocks are provided to secure the connectors to their associated products. This cable assembly is suitable for use with Pickering BRIC modules that use the 100-pin Micro-D connector.
-
Product
96-Pin Micro-D Connector Block, Female DIN Rail Mounted
40-966-096-F
SCSI Female Connector Block
Suitable for mounting on DIN Rails this connector block provides a simple method of connecting to 96-Pin SCSI Style Micro-D connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. The metal shell includes an internal insulation barrier under the carrier board.
-
Product
100-Pin SCSI DIN-Rail Wiring Board
ADAM-3956
-
DIN-rail wiring board for PCI-1240/1245/1245E/1245V/1245L/1265/1285/1285E application.Dimensions (W x L x H): 122 x 171 x 45mm (4.8" x6.73" x 1.77")DB-26 connectorLED indicators
