Product

PXI Single 2 Channel Optic Mux FC/PC

40-855-112

-

Pickering Interfaces Inc.

40-855-112 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

Noise Source, 10 MHz to 18 GHz, nominal ENR 6 dB

346A

-

Keysight Technologies

346A - Keysight Technologies

The Keysight 346A noise source is the ideal companion to Keysight's noise figure solutions. Since it is broadband (10 MHz to 18 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. The very small change in reflection coefficient (<0.01) from ON to OFF is designed especially for accurate characterization of input-impedance-sensitive devices (like GaAsFETs and many UHF amplifiers).

Product

Controllable, Programmable AC Source Motorized

EAC / MT / SL

-

ET System Electronic GmbH

EAC / MT / SL - ET System Electronic GmbH

*Motor-controlled AC sources*Regulated motor-controlled AC source*Separate display for voltage and current*Regulated motor-controlled AC source*Separate display for voltage and current*Optional interfaces

Product

Sodium heat Pipe Blackbody Source

Oberon R Model 426

-

Isothermal Technology Ltd

Oberon R Model 426 - Isothermal Technology Ltd

The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of Aluminium, Silver or Copper ITS-90 Fixed Points.

Product

Optical Talk Set

TW4103

-

Techwin(China) Industry Co., Ltd

TW4103 - Techwin(China) Industry Co., Ltd

Full-duplex digital communication with high quality conversation connection and low background noiseTogether with Optical Clip-on Coupler, enables on line communications availableCombining functions of both a digital optical phone call and a stabilized light source.Large LCD display with backlightLow battery power indicationApplicationsMaintenance in TelecomMaintenance CATVTest Lab of optical fibersOther Fiber Optic Measurements

Product

Light Intensity Distribution Tester

HP860LED

-

Hangzhou Hopoo Optoelectronics Technology Co., Ltd

HP860LED - Hangzhou Hopoo Optoelectronics Technology Co., Ltd

It is specially used to measure the photoelectric parameters of LED light distribution curve (LED light intensity distribution), beam angle, normal light intensity, forward voltage, reverse current, reverse breakdown voltage and other photoelectric parameters, in line with CIE pub.No. 127 condition A or B. This system achieves high-precision testing of the optical and electrical properties of LEDs, provides LED manufacturers with sufficient LED optical and electrical parameters, and makes the development and production of LEDs more effective and reliable.

Product

Second-Grade Service Area Externally Modulated Optical Transmitter

HT8500A

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HT8500A - Hangzhou Huatai Optic Tech. Co., Ltd.

How to select 1550nm optical transmitter for second-grade service area is always a difficulty. Take technical feature and long-term development of the network into consideration, we should select 1550nm Externally Modulated optical transmitter, however, such transmitter with reasonable price which can be suitable for Second-grade service area is unavailable in the current market. Considering the traditional cost, 1550nm Internal Modulated optical transmitter will be selected to have a test.

Product

Optical Wavelength Meters

-

ADC Corporation

ADC Corporation

Optical wavelength meter that uses a He-Ne laser as reference wavelength and employs the Michelson interferometer method, providing high-accuracy measurement. It can measure emission center frequencies of LDs for DWDM with high resolution and accuracy.The 8471 even provides a high sampling rate of 10 times per second, and is suitable for oscillation wavelength adjustment. In addition, its deviation display function allows wavelength variation to be measured with high resolution and accuracy.

Product

Optical Monitoring

-

Coherent Corp.

Coherent Corp.

Perform OSNR monitoring, valid channel detection, and center wavelength measurement of signals with arbitrary modulation formats.

Product

Optical Active Module

-

East Photonics, Inc.

East Photonics, Inc.

UPM (Universal SFP-Typed Power checker Module) provide very high productivity for power checking work on high density fiber optic systems and devices for FTTH, CWDM-PON and local network systems. UPM can measure optical power intensity.

Product

Platinum Tools Fiber Optic Visual Fault Locator

#TVFL100

-

NSI Industries

#TVFL100 - NSI Industries

Fiber optic visual fault locator works with virtually all 1.25mm and 25mm fiber optic sizes and connector types.

Product

Optical Modulation Analyzer and High-speed Digitizer Test Solution

M8290A

-

Keysight Technologies

M8290A - Keysight Technologies

The M8290A is a flexible solution platform for 400G coherent component and transmitter test. It incorporates a 92 GSa/s modular optical modulation analyzer and a 92 GSa/s 4-channel electrical digitizer. Besides these modules an additional arbitrary waveform generator module up to 92 GSa/s, such as the M8196A, can be added to the same AXIe chassis. This setup results in a compact and flexible coherent test solution that can be used together with additional specialized solution software for Integrated Coherent Receiver (ICR) and Analog Coherent Optical (ACO) module characterization.

Product

Digital Light Meter

-

Morris Products Inc.

Morris Products Inc.

Digital Light Meter features include: Easy-to-use, Pocket Size & Light Weight, Low Battery Indicator, Photo Detector: One Silicon Photo Diode with Filter

Product

Absolute Optical Encoder

A2

-

U. S. Digital

A2 - U. S. Digital

Product DescriptionRestriction of Hazardous SubstancesThe A2 absolute encoder is a non-contacting optical rotary position sensor which reports the shaft angle within a 360 deg. range. As opposed to incremental encoders, the A2 reports the absolute position rather than the change in position. When powered up, it does not require a home cycle, even if the shaft was rotated while the power was off. In multi-turn mode, it tracks the position in a 32-bit counter as long as the power supply is maintained. Internally, an infrared LED flashes through a circular bar code onto a linear array sensor. The microcontroller decodes the image into a unique position. All user programmable parameters such as resolution, origin, direction and mode are permanently stored in an internal EEPROM

Product

Digital I/O Board, 64 Optically Isolated I/O Channels, 24V

APCI-1564

-

TEAM SOLUTIONS, INC.

APCI-1564 - TEAM SOLUTIONS, INC.

32 bit, 33 MHz, PCI interfaceInput channels32 isolated digital input channels, 24 V, incl. 16 interruptible and 3 fast counter inputsInput channels organised in 4 groups of 8 channels, each group has its own ground lineVoltage reversal protectionAll inputs are filteredOutput channels32 isolated digital output channels, 10 to 36 VOutput current per channel 500 mAWatchdog for resetting the outputs to "0"After power/ON the outputs are reset to ì0îShort-circuit current for 16 outputs ~ 3 AShort-circuit current for 32 outputs ~ 6 AShort-circuit current per output ~1.5 AElectronic fuseOvertemperature and overvoltage protection24 V power outputs with protection diodes and filtersSpecial output capacitors minimise electromagnetic emissionsExternal 24 V supply screened through a protection circuitryShutdown logic when the external supply voltage drops unter 5 V

Product

Optical Power And Energy Meters

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs' expanding line of optical power and energy meters includes power meter consoles, a large selection of sensor heads, a wireless power meter with a built-in photodiode sensor, and a fiber optic power meter designed for use in the field. The consoles (PM100, PM400, and PM300 Series) when paired with our extensive line of power and energy sensors provide calibrated (NIST traceable) measurements across a broad range of powers, energies, and wavelengths. The console(s) and sensor(s) can be purchased individually or as bundles based on our most popular console and sensor pairings. The sensor calibration data is stored in the sensor head and is automatically read by the console, which allows the user to use multiple sensors with the same console. Compatible sensors are easily identified by the red c-series connector. All of our old A/B-Type sensors are available with the new connector; plus, we have continued to expand our power and energy sensor product lines.

Product

High Accuracy AC Reference Source

515

-

Clarke-Hess Communications Research

515 - Clarke-Hess Communications Research

The Model 515 High Accuracy AC Reference Generator fills a need for a relatively low cost and practical solution for supplying a reference excitation to typical LVDT and Synchro/Resolver transducers. The Model 515 has built-in load sensing which, in effect, yields "zero" output impedance and virtually eliminates the effects of fluctuating output loads. With up to 15 VA of output into loads with as much as 80 of phase shift, the Model 515 is ideally suited to driving inductive loads.

Product

Optics Test Systems

IR Autocollimator

-

Optik Elektronik Gerätetechnik GmbH

IR Autocollimator - Optik Elektronik Gerätetechnik GmbH

The infrared autocollimator was specially designed for the 1550 nm wavelength range. In conjunction with the CROSDETECT evaluation software, it achieves a measuring accuracy of 1 arcsec with a resolution of 0.1 arcsec. The camera used is suitable for the wavelength range from 900 nm to 1700 nm.

Product

Low Light USB Camera Board (Color)

See3CAM_CU30 - 3.4 MP

-

e-con Systems Inc.

See3CAM_CU30 - 3.4 MP - e-con Systems Inc.

See3CAM_CU30 is a 3.4 MP UVC-compliant Low Light USB camera board based on AR0330 sensor from ON Semiconductor®. This Low Light Board Camera is backward compatible with USB 2.0 and supports compressed MJPEG formats at frame rates equal to USB 3.0. This sensor enables a superior low light performance. It has a dedicated, high-performance Image Signal Processor chip (ISP) that performs all the Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images, videos and the MJPEG compressions.

Product

Entry Level Laser Source

SLS-21

-

ShinewayTech

SLS-21 - ShinewayTech

SLS-21 series Stabilized Laser Source paired with ShinewayTech optical power meters can meet the test requirements of fiber identification, attenuation/loss measurements, continuity verification and transmission quality evaluation on singlemode and multimode fibers in LAN/WAN/CATV systems, offering high quality, stability and competitive costs.

Product

Optical BGA Inspection

-

Inspectis Optical Systems AB

Inspectis Optical Systems AB

Imaging hidden solder joints of BGA, IBGA, FlipChip, CSP, CGA and SMD components

Product

D/A Converters And Precision DC Source Instrumentation

-

Marvin Test Solutions, Inc.

Marvin Test Solutions, Inc.

PXI Arbitrary Waveform and Programmable Function Generators as well as DC source cards and a precision standards module.

Product

Optical Power Meters

-

Fiberstore

Fiberstore

Optical Power Meter.