Product

BNC (M) To Multi-Stacking Banana Plugs

3957

-

Pomona Electronics

3957 - Pomona Electronics

BNC (m) to multi-stacking banana plugs. Converts BNC (Female) cables/connectors to top/side stackable banana plugs for test versatility. BNC connector and banana plugs are molded directly to the wire for pull strength durability anddust/moisture resistance.

Product

Banana Plugs and Jacks

-

Pomona Electronics

Pomona Electronics

Banana plugs and jacks are used to carry dc and low-frequency signals. They are commonly used on power supplies and multimeters.

Product

Variable Power Supply

VS-10a

-

Allied Edison LLC

VS-10a - Allied Edison LLC

The VS-10a power supply is a light weight, portable, non-isolated “variable source” from 0 volts to 150 Vac or 0 volts to 150 Vdc and rated for up to 10 amps, thus the name VS-10a. It is comprised of an illuminated voltmeter that reads to the first significant digit, AC variable system output voltage, DC variable system output voltage, logic output voltage and one sense (continuity) contact monitoring points. Banana jacks for connection of test leads are spaced at intervals that allow the use of dual banana test plugs if desired. The VS-10a is protected by two levels of overcurrent protection; AC input, and ground fault protection by a GFCI. All circuitry is housed inside a custom designed case made from 16 gauge steel. An Internal fan dissipates heat buildup and exhaust through louvered side vents built into the case. The carrying handle is designed with a “spring return to rest” position and is padded for comfort. The case has been sized for optimum portability and is balanced from the handle during transportation. The case has a powder coated finish that is scratch, chemical and weather resistant. Rubber padded feet support the case when in the upright position and a convenience receptacle is located on the side of the case.

Product

3-48V Auto Tester

1960A

-

Peaceful Thriving Enterprise Co Ltd

1960A - Peaceful Thriving Enterprise Co Ltd

Check on 3-48V systems. Especially suitable for the control of electrical and electronic parts of motor vehicles, for the fault finding on components. The tester is connected with a banana plug adapter, including a testing probe and an alligator clip.

Product

Mini Back Probes/Wire Piercers

618

-

Electronic Specialties Inc.

618 - Electronic Specialties Inc.

*Great for backprobing weather pack style connectors used with numerous automotive sensors *Also very handy for piercing and tapping readings on smaller gauge wires - using the included probe adapters *Works with most Test Lead Kits in the field - with standard 4mm banana plug test lead *Set includes four probes - red, black, green, yellow Test probes 21 mm length

Product

Output Signal Cable

COSxx-A

-

SENIS

COSxx-A - SENIS

The Output Signal Cable COSxx-A is specifically designed for use with SENIS H3A Magnetic Transducers, offering superior connectivity and reliability in your applications. This cable features the R605 connector, which is designed to accommodate differential signal output while ensuring a robust shield connection to minimize interference. With a meticulously crafted construction of Alpha Wire, it utilizes a configuration of two wires (20 x 2 x 0.12 mm²) surrounded by an effective shielding layer, making it ideal for precise signal transmission in various environments. In addition to its excellent technical specs, the cable is equipped with banana plugs for easy and secure connections. The VOUT- is designated with a red wire, while VOUT+ is represented by a yellow wire, and the shield is marked with a black wire. The connector's body integrates seamlessly with the cable shield, and the wires at the end are meticulously soldered to maintain performance integrity. This cable is tailored for engineers and technicians who require high-quality, reliable connections for their SENIS H3A transducers, ensuring optimal performance and longevity in critical applications.

Product

Electronic Dmm Test Lead Kit For Hand-Held Meters

5543B

-

Pomona Electronics

5543B - Pomona Electronics

Electronic DMM test lead kit for hand-held meters. Test leads with a right angle banana plug are ideal for use with hand held digital multimeter. Flexible test leads feature high strand count silicone wire for extreme flexibility and high temperature resistance.

Product

Standard Capacitor

1409 Series

-

IET Labs

1409 Series - IET Labs

The elements used in 1409 Standard Capacitors are selected for low dissipation factor and are stabilized by heat cycling. They are housed in cast aluminum cases, along with silica gel which provides continuous desiccation. These cases are sealed with high-temperature wax. A well is provided in the wall of the case for insertion of a dial-type thermometer. Three jack-top binding posts are provided on the top of the case, and removable banana plugs on the bottom, for convenient parallel connection without error

Product

AC/DC Clamp Meter

3904 CL

-

Standard Electric Works Co., Ltd

3904 CL - Standard Electric Works Co., Ltd

● 4000 - count LCD.● Full automatic measurement. ◎ Voltage measurement. ◎ Current measurement. ◎ Resistor measurement. ◎ Capacitor measurement ◎ Frequency counter.● Range change function.● Data Hold function freezes the reading.● Continuity check.● Diode measurement.● Low battery indication.● Auto Power Off (APO) function.● Safety design throughout with no exposed metal parts, shielded banana plugs and recessed input terminals.

Product

Output Signal Cable

Co10-SE

-

SENIS

Co10-SE - SENIS

The Output Signal Cable Co10-SE is meticulously designed for use with SENIS 3DACMT magnetic transducers, ensuring reliable connectivity and optimal performance. This cable features a tough construction with a 4mm standard banana plug connector, facilitating secure and efficient signal transmission. The layout of the signal wiring includes color-coded outputs for the X, Y, and Z axes, alongside a dedicated ground connection, which simplifies the installation and troubleshooting process for users.

Product

18 Inch Universal Flex Current Probe Accessory

FLIR TA74

-

Teledyne FLIR

FLIR TA74 - Teledyne FLIR

The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple conductor measurements, double-wrap requirements, and deeper access. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.

Product

Interconnect Test Leads

142-1

-

Electronic Specialties Inc.

142-1 - Electronic Specialties Inc.

This 64 inch pair of test leads connects with many different testing accessories and probes. Especially those found in typical test lead kits and assortments. The ends terminate in universal size 4mm banana plugs.

Product

Clamp-On / Precision / Split Core Current Transformer

-

Meco Instruments Pvt. Ltd.,

Meco Instruments Pvt. Ltd.,

Transformer Ratio (Arms) : 100A / 1AColours : Red, yellow, blueConnection : Safety Sockets for Banana Plugs ф 4mm Jaw Opening : Cable Dia 15mm max.

Product

Terminal Test Kit (19 PCS)

3604

-

Peaceful Thriving Enterprise Co Ltd

3604 - Peaceful Thriving Enterprise Co Ltd

1. Checks voltage on 6, 12 and 24V systems.2. 12-feet flexible rubber wire with spring relief.3. Tough plastics handle lights up if circuit is good.4. 4mm connection for banana plugs.5. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.

Product

Testing Leads Assortment (16PCS)

3605B

-

Peaceful Thriving Enterprise Co Ltd

3605B - Peaceful Thriving Enterprise Co Ltd

1. Suitable for use on the 6-24V circuits2. 4mm banana plugs connection3. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.

Product

48" Stacking Banana Plug Test Leads

146-P

-

Electronic Specialties Inc.

146-P - Electronic Specialties Inc.

These test leads feature stacking banana plug jacks, with extended 48" length. These are great for establishing connections to diagnostic test points, while allowing the connection to be tapped with other instruments...2 way connections. These feature high flexibility wire and standard 4mm size banana jacks. You will receive one red test lead and one black test lead. These test leads are compatible with Electronic Specialties 146 and 147 test lead kits.

Product

Test Leads

-

AST Labs

AST Labs

Test leads for digital multi-meters (DMM), tone generators, butt sets, oscilloscopes, and other test equipment that uses specialized connectors like Bed of Nails alligator clips, RJ11, sheathed banana plugs, etc. Our cables are similar and replaces genuine manufacturer cables from Fluke, Harris, Tektronix, HP, JDSU etc.

Product

Terminal Test Kit (19 PCS)

3605

-

Peaceful Thriving Enterprise Co Ltd

3605 - Peaceful Thriving Enterprise Co Ltd

1. Check high and low voltages (power and ground) on 6, 12 and 24V system.2. 4mm connection for banana plugs.3. LED indicates red for power (high) and green for ground (low).4. High impedance protects sensitive electronic ignition components.5. Connects red lead to power source and black lead to ground source.6. 1.8m long heavy-duty dual leads with battery clips and spring strain relief.7. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.