Code
See Also: Programming, Scripts
-
Product
Cable Assembly, 9-Pin D-Type Female To Unterminated With Ferrules, 0.5m, HV
40-972-009-0.5m-FU-HV
Cable Assembly
A range of 9-Pin D-Type High Voltage cable assemblies with unterminated connections on one end, constructed from PTFE Type C insulated wire. The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated.
-
Product
Basic Contact Probes (75 Mil) F79330S064L120
1006898
-
The Basic Contact Probes (75 mil) F79330S064L120, identified by order code 1006898, are engineered for precision and reliability in a variety of applications. These probes are designed with a pitch of 75 mil (1.90 mm) and can operate within a temperature range of -45°C to +80°C, making them suitable for extreme environmental conditions. The robust construction includes a steel plunger with a gold plating for longevity and corrosion resistance, while the nickel silver barrel complements the gold plating to enhance conductivity and durability.
-
Product
Rapita Verification Suite
RVS
-
*Run requirements-based tests on your code *Produce coverage evidence including MC/DC from tests *Analyze execution time including worst-case timing on-target *Understand program scheduling behavior *Produce evidence for DO-178 and ISO 26262 certification
-
Product
Dual Channel Dynamic Data Simulator
LS-77-SS
-
The Lumistar LS-77-SS PCI Dual Dynamic Data Simulator with optional bit synchronizer allows two command simulators one bit synchronizer, and a time code reader/generator in a single short PCI board. The two Command Data Simulators and Time Code Reader/Generator are implemented in FPGA using a next generation design based on the LS-70-P. The optional bit synchronizer is achieved using the Lumistar LS-40-DB low-profiledaughterboard.
-
Product
Static Code Analysis for Embedded Software
GrammaTech CodeSonar®
-
CodeSonar is GrammaTech´s flagship static analysis software. Able to analyze both source code and binary code, it is specifically designed for zero-tolerance defect environments. With its advanced static analysis engine, CodeSonar is one of the most effective tools for eliminating the most costly and hard-to-find software defects early in the application development lifecycle. Compared with other tools, CodeSonar identifies twice as many defects that result in system crashes, leaks, data races, memory corruptions and security vulnerabilities.
-
Product
Pre Setting Bend
14
-
Parker Conflow’s Code 14 is a compact and user friendly setting and checking tool for underground fire hydrants (Code 12) in mining, tunnelling and quarrying applications.
-
Product
Basic Contact Probes (75 Mil) F07543S064L200
1017519
-
The Basic Contact Probes (75 mil) F07543S064L200, with order code 1017519, are engineered for precision and reliability in various applications. With a compact design featuring a pitch of 1.90 mm and capable of operating in extreme temperatures ranging from -45°C to +80°C, these probes are built to withstand harsh environments while maintaining optimal performance. Their robust construction ensures durability, making them ideal for demanding technical applications.
-
Product
Basic Contact Probes (100 Mil) F77206B200G220
1009545
-
The Basic Contact Probes (100 mil) F77206B200G220, designated by order code 1009545, are engineered for precision applications requiring high reliability and performance. These probes are capable of operating within a temperature range of -45°C to +80°C, making them suitable for various environments. With a pitch of 2.54 mm (100 mil), these probes provide excellent connectivity and signal integrity.
-
Product
Cable Assembly 68-Pin Micro-D Male to Unterminated, Ferrules, 1m
A068SMR-F-5A100
Cable Assembly
The 68-Pin Connector to Unterminated Cable Assy is constructed from 7/36 (28AWG) twisted pair wires with polypropylene insulation. The wires are colour coded to match the connector pin designation. The connector can be secured to the product by a Metal Spring Latch.
-
Product
CXA-m PXIe Signal Analyzer
M9290A
Signal Analyzer
Deploy a smaller microwave footprint, no trade-off in precision: Rely on fully specified performance up to 26.5 GHz in 4 slots Optimize your balance between speed, sensitivity and accuracy with the choice to operate in swept or FFT modes Perform fast calibrated stimulus response measurement with full-band tracking generator Smooth the transition between R&D, manufacturing, and maintenance: CXA-m is code compatible with benchtop X-Series signal analyzers and ESA spectrum analyzers
-
Product
Building Permit Expediting Services
-
Tejjy Inc. offers expert permit expediting services for construction projects in Washington DC, Baltimore, Maryland, and Virginia. We specialize in ensuring faster and hassle-free building permits for residential, commercial, hospitality, and federal design-build projects. Our comprehensive construction building permit management services focus on resolving permitting issues, handling the submittal process, and adhering to local building codes. With a deep understanding of the permit expediting process, we prioritize local regulations and submission procedures to obtain building permits efficiently. Trust Tejjy Inc. for reliable and precise permit management services.
-
Product
FAWZ755
1024631
-
The FAWZ755, identified by order code 1024631, is a specialized tool designed for precision applications in various technical environments. This product falls under the category of tools and equipment, specifically within receptacles, where quality and reliability are paramount. With a total length of 118.00 mm and an outer diameter of 3.50 mm, the FAWZ755 is engineered to meet specific industry standards, ensuring compatibility and optimal performance in its designated tasks.
-
Product
Insulation Meters
-
Here you will find an insulation tester for a variety of ranges between 50 mega ohms and 2000 mega ohms. The portable manual insulation tester is used for determining insulation resistance, continuous current, alternating current and testing. With an insulation tester, measurements can be taken for different voltages, beginning with 100V up to 10,000V. Measurements meet the DIN VDE 0413 part 1 standard. The insulation tester comes with a test mechanism, clips, batteries and a carrying case. The insulation meter can be equipped for test laboratories if an optional DIN EN ISO is acquired.Measurement of insulation in cables and motor coils is vitally important for the prevention of accidents and damage to installations and is obligatory according to most codes of conduct.
-
Product
IP Surveillance
-
In response to the enterprises’ crucial demand for security monitoring, PLANET IP Surveillance features H.265, H.265+ High Efficiency Video Coding (HEVC), AI face detection and recognition, along with AI-powered Video Analytics such as intrusion detection, cross line detection, loitering detection and more. Moreover, with PLANET’s user-friendly website management, NVR, Apps and free DDNS services, customers are able to monitor all devices remotely and easily.
-
Product
MIL-STD-1553 Test & Simulation Interface for PCI Express
PCIe-C1553
-
Avionics Interface Technologies
Dual redundant, single, dual or quad stream configurationsSoftware selectable Transformer, Direct, and Bus Stub Coupling Modes - Concurrent Bus Controller, 31 Remote Terminals, & Bus monitor operation - Full error injection and detection - Multi-level triggers for capture and filtering - Ten high voltage (up from 30V) programmable DIO lines - IRIG-B time code encoder/decoder with free-wheeling mode - Real-Time recording and physical bus replay - x1 Lane PCI Express Host Interface (x4 Physical edge connector) - Application interface supporting C, C++, C#, and .NET development - Device driver support: Windows, Linux, LabVIEW Real-Time (others on request) - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software
-
Product
Basic Contact Probes (100 Mil) F78607S200L150
1001543
-
The Basic Contact Probes (100 mil) F78607S200L150, identified by order code 1001543, are designed for versatile electrical connectivity in various applications. With a precision pitch of 2.54 mm (100 mil), these probes can operate effectively in a temperature range of -45°C to +80°C, making them robust for harsh environments. The continuous current capacity of 5.00 A and a typical contact resistance of just 25.00 mOhm ensure reliable performance under load, while their preloaded spring mechanism (60.00 cN) guarantees optimal contact force and precision in measurement applications.
-
Product
F87505B180G135
1001712
-
The F87505B180G135, identified by order code 1001712, is a robust switch probe designed for reliable performance in various applications. This normally open (NO) probe belongs to the F875-NO family, featuring a compact design with a pitch of 2.54 mm. Operating within a temperature range of -45°C to +100°C, it ensures adaptability in different environments while offering high electrical efficiency with a continuous current rating of 5.00 A and a low typical contact resistance of just 65 mOhm.
-
Product
Push Back Probes (VF4) VF416B180G05
1005150
-
The Push Back Probes (VF4) VF416B180G05, with order code 1005150, is designed to deliver exceptional performance in precision applications. Engineered with a basic contact probe design, the VF4 series boasts a pitch of 4.00 mm (157 mil), making it ideal for intricate electronic components. With a temperature range from -45°C to +100°C, it is suitable for various operating environments. This probe is crafted to handle continuous current up to 10A and maintains a low typical contact resistance of 30 mOhm, ensuring reliable electrical connectivity even under demanding conditions.
-
Product
IEC60529 IPX5/6 Water Jet Nozzle
-
Shenzhen Chuangxin Instruments Co., Ltd.
IEC60529 IPX5/6 Water Jet Nozzle is designed according to the requirements of IPX5 and IPX6 code of GB4208 and IEC60529 standard. IEC60529 IPX5/6 Water Jet Nozzle is used to test the waterproof performance of the appliance and electronic. The IEC60529 IPX5/6 Water Jet Nozzle consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel.
-
Product
Underwater Hydrophones
Piston hydrophone
-
A circular plane piston, immersion hydrophone for measurements in the frequency range 100 kHz to 1 MHz. Code ML4X50.
-
Product
Pivotal Tool FEWZ-075E65
1000747
-
The FEWZ-075E65 is a pivotal tool that falls under the category of receptacles, specifically designed for precision operations in various technical applications. With a total length of 86.50 mm, this model combines compact design with robust functionality, making it an ideal choice for professionals seeking reliable and efficient tools in their workflows. Its unique order code, 1000747, allows for easy identification and procurement, ensuring that users can confidently select this product for their specific needs.
-
Product
PNA-X Measurement Receiver for Antenna Test
N5264B
Receiver
A new industry standard for antenna test with 400,000 point per second data acquisition on all five measurement channels Twice as many receivers available compared to any other antenna receiver on the market Replace existing 8530A and 8360 solutions for a system speed improvement that is 10 times faster Built-in 8510/8530A code emulation software provides a drop-in replacement for existing antenna ranges utilizing an 8530A
-
Product
Mini Portable
-
An inexpensive palm-sized SMPTE time code generator intended for field use in multi-camera situations when its desirable (or necessary) for each tape to have the exact same time code for precise image matching during post
-
Product
Basic Contact Probes (50 Mil) F78833S050L165L
1006037
-
The Basic Contact Probes (50 mil) F78833S050L165L, with order code 1006037, are engineered to provide exceptional performance in a variety of technical applications. These probes are capable of withstanding extreme temperatures ranging from -45°C to +80°C, ensuring reliability across diverse environments. The design features a pitch measurement of 1.27 mm (50 mil), making it an ideal choice for precise electronic connections. With a continuous current capacity of 2.00 A and a typical contact resistance of just 20 mOhm, these probes deliver efficient conductivity, vital for high-performance applications.
-
Product
Database Monitoring
-
Identify and solve database issues that impact application performance! Find out if it’s your code that’s causing problems and learn how to fix database problems without running to your DBA for support. Dynatrace monitors and analyzes the database activity of your services, providing you with visibility down to individual SQL and NoSQL statements. With Dynatrace you see how your application impacts your databases.
-
Product
Test Sphere Probe
CX-500
-
Shenzhen Chuangxin Instruments Co., Ltd.
Test Sphere Probe This sphere is intended to verify the degree of protection of enclosures for an IP2 Code per IEC 529. Sphere is hardened steel with chrome finish. TOP
-
Product
FEWZ-340E0
1005040
-
The FEWZ-340E0 is a specialized receptacle tool designed for precision and efficiency in various applications. With an order code of 1005040, this tool boasts a total length of 100.00 mm and an outer diameter of 2.40 mm, making it an ideal choice for tasks requiring meticulous attention to detail. Its compact size allows for easy maneuverability in tight spaces, enhancing workflow efficiency without compromising on performance.
-
Product
Cable Assembly, 9-Pin D-Type Male to Unterminated With Ferrules, 2m
40-972-009-2m-MU
Cable Assembly
A range of 9-Pin D-Type cable assemblies with unterminated connections at one end and constructed from PFA insulated wire. The connector assembly can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated.
-
Product
General Purpose Lab Oven
REXMED ROV-180
-
MOD. ROV-180, AC 110/230V, Plug type: , General purpose lab oven, dry air / hot air sterilizer, HS CODE: 841780, UNCCS CODE: 447483, UMDNS CODE: 14410, Main construction: powder coated steel and SS304, Controller: Microprocessor based PID controller, water proof keypad with timer, ˚C/PV and ˚C/SV display and setting, Timer: 9999/min, 9999/hr, Timer has DELAY_ON and DELAY_OFF function and at the end of operation audio and visual warning, Working range: Ambient +5˚C~250˚C, Stability at 37˚C: ±0.2˚C, Uniformity at 150˚C: ±1.5˚C, Sensor: PT 100Ω, Temperature audio and visual warning for AL-H and AL-L and OFS correction setting, Heater: 600W X 2pcs, Chamber: L40 X W40 X H50cm, Capacity: 80L, chamber with key lock, W/S: shelf X 2pcs
-
Product
Cable Tester, Coax Cable Mapper 8 ID Finder with Toner
TCT-128
-
A handheld testing device designed for CATV and security installers to test multi-run coaxial cable systems terminated with "F" or BNC connectors. Uses eight color coded ID finders to locate and identify cables.
