Frequency Synthesizers
Generate programmable or a preprogrammed set of stable and precise frequencies.
See Also: Rf Frequency Synthesizers, Time Reference
-
Product
Frequency Family 700 – 6000 MHz
-
A broadband amplifier that covers the 0.7 – 3.0 GHz frequency range. This small and lightweight amplifier utilizes Class A linear power devices that provide an excellent 3rd order intercept point, high gain, and a widedynamic range.
-
Product
2GHz programmable frequency dividerValon
3010a
-
The Valon 3010a accepts a wide range of input frequencies and provides three independent, user-selectable, divided outputs. The 3010a is useful for extending the low-frequency range of any signal source down to 5MHz as a 50Ω output or down to 0Hz as a TTL output.
-
Product
Radio Frequency Probe HF819HSDm011G1270H819AEPPV2
1012608
-
The HF819HSDm011G1270H819AEPPV2 Radio Frequency Probe is an advanced automotive tool designed for precise and reliable measurements in high-frequency applications. Engineered with cutting-edge technology, this probe features a coaxial design that minimizes signal loss and ensures accurate readings across a range of automotive testing scenarios. It operates within a frequency range of up to 1 GHz, making it ideal for modern vehicle diagnostics that demand high-performance electrical solutions.
-
Product
Frequency & Pulse Distribution
-
Timetech frequency distribution amplifiers and pulse distribution units.
-
Product
FREQUENCY DISPLAY UNIT
TYPE NFD-1
-
The National RF Type NFD-1 Frequency Display Unit was designed for use with vintage and classic communications equipment, to display the received or transmitted radio frequency. The unit incorporates an internal processor that allows the intermediate frequency (IF) to be counted out by the frequency counter. The resultant display is the actual frequency that the equipment is receiving or operating at.
-
Product
Multifrequency Clock Synthesizer - PMC
Model 7190
-
- Simultaneous synthesis of up to 5 different clocks- 8 SMC clock outputs- Ideal for A/D and D/A converter clock sources- Typical phase noise: -125 dBc/Hz @ 1 kHz offset- All clocks are phase-locked to input reference signal- Input reference frequency of 5 or 10 MHz- Four quad VCXOs allow selection from 16 different base frequencies- Output clocks of 1, 2, 4, 8, or 16 submultiples of VCXO base frequencies- Output clock frequencies between 50 and 500 MHz- Control and status via PCI bus interface
-
Product
Mode Locked Synthesizer
IT9200
-
The ITS-9200 is a synthesized RF source with a flexible locking capability that allows it to be phase-locked to non-standard external references. It is specifically designed for synchronization to mode-locked lasers with pulse output frequencies in the 72-80 MHz region, although it can be easily modified to adapt to other reference frequencies.
-
Product
Sweep Frequency Response Analyzer
FRANEO 800
-
FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response analysis (SFRA) principle and measures the electrical transfer function over a wide range of frequencies.
-
Product
Audio Frequency Transmitter
TG 600
-
Cable fault location with the BAUR TG 600. The TG 600 audio frequency transmitter was designed specifically for the precise location of cable faults and joints using the twist method. The display of the input and output current makes selection of the correct adjustment easier.* High-performance audio frequency transmitter up to 600 VA* Frequency of 2 or 10 kHz, quartz-stabilised (other frequencies on request)* Potential-free output* Impedance adjustment in 8 steps from 0.3 to 300 Ω
-
Product
Frequency Response Analyzers
-
Frequency Response Analysis (also referred to as Transfer Function Analysis) measures the output spectrum of a system relative to a stimulus, and is used to characterize the dynamics of the system under test. The technique measures the magnitude and phase relationship between output and input waveforms as a function of frequency. The input signals may be from a wide range of sensors including acoustic (microphones/sonar), mechanical (accelerometers/displacement transducers), optical (photodetectors), and electrical (amplifiers).
-
-
Product
Millimeter-wave Operation With Frequency Extenders For M980xA PXI VNA
S95560B
Vector Network Analyzer
banded vector network analyzer (VNA) using the M980xA PXI VNAs and N5252AW or N5262BW Frequency Extenders.
-
Product
AC Power Supplies & Frequency Converters
-
Behlman manufactures a broad line of AC Power supplies and Frequency converters with available power from 1,000 VA to 120,000 VA in both single-phase and three-phase output. Available with variable or fixed voltage and frequency output, manual or programmable control, with a variety of interfaces, unique protection circuitry and the ability to modify units for your application.
-
Product
Time & Frequency System
TM-4M
-
The TM-4M Time & Frequency System features a larger, easier to use form-factor. It was designed for mobile applications that require uninterruptible power, and for applications that require multiple front panel connections. The six BNC jacks on the front panel are user-assignable to output any signal the user chooses.
-
Product
Radio Frequency Probes HF77HMTDmWPCable0120G750HMTDmF
1176857
-
Introducing the HF77HMTDmWPCable0120G750HMTDmF, a highly specialized coaxial probe designed for precise and reliable radio frequency applications. With a compact design featuring a pitch of 12 mm (473 mil), this probe can effectively handle frequencies up to 20 GHz, making it an ideal choice for high-performance scenarios in telecommunications and electronics testing.
-
Product
Radio Frequency Probes (Industrial) HF860SMBf016G530MCXfS
1038930
-
The Radio Frequency Probes (Industrial) HF860SMBf016G530MCXfS are precision engineering components designed for high-performance applications in RF signal transmission. With a coaxial probe design, these probes ensure minimal signal loss and maximum reliability across a variety of industrial uses. The HF860 model features an exceptionally wide operational temperature range from -45°C to +100°C, making them suitable for demanding environments. Their robust construction includes a beryllium copper plunger and brass barrel, each plated with gold to enhance conductivity and resist corrosion, thus maintaining integrity over time.
-
Product
Radio Frequency Probe HF66JSC016G480MSMPmS
1024466
-
The HF66JSC016G480MSMPmS Radio Frequency Probe is a high-performance coaxial probe designed for precision applications in consumer electronics. Capable of operating in a temperature range from -45°C to +100°C, this probe demonstrates optimal functionality in various environmental conditions. With a continuous current rating of 0.50 A and an impedance of 50 ohms, it is tailored for use in high-frequency applications of up to 6 GHz, making it suitable for modern RF testing and measurement tasks.
-
Product
Radio Frequency Probes (Consumer) HF66UFL018G620SMAfF
1036633
-
The Radio Frequency Probes (Consumer) HF66UFL018G620SMAfF, identified by Order code 1036633, are designed for high-performance connectivity in RF applications. These coaxial probes stand out with a pitch of 10.0 mm/394 mil, ensuring versatility and durability over a temperature range of -45°C to +100°C. With a continuous current capacity of 5.00 A and an impedance of 50 ohms, the probes are optimized for frequencies up to 8 GHz, making them suitable for demanding RF environments.
-
Product
Radio Frequency Probes (Automotive) HF77MATENETm011G1020HMTDmFV1
1097821
-
The Radio Frequency Probes (Automotive) HF77MATENETm011G1020HMTDmFV1 is designed for precision applications in automotive settings, offering superior performance under various conditions. With a temperature range of -45°C to +100°C, this probe is ideal for testing across a wide spectrum of environments. It features a reliable coaxial design that ensures consistent signal integrity while maintaining high durability. Equipped with a plug connection type (flux-proof), it supports ease of integration with various testing setups, making it a versatile tool for both professionals and aftermarket applications.
-
Product
Economic Type Frequency Indicator
CS1-RL
-
CS1-F economic type Frequency Indicator has been designed with high accuracy measurement, display and communication of Frequency.The innovation feature is auto-range input from 0.01Hz~ 100KHz (option ~140KHz) and the display resolution will auto-change to show the highest according to input frequency.They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485 (Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of panels and testing applications.
-
Product
Radio Frequency Probes HF77HFMm0112G540MSMPmP
1034900
-
The Radio Frequency Probes HF77HFMm0112G540MSMPmP is designed for high-performance applications where precision and reliability are critical. This coaxial probe provides a robust and efficient means of measuring radio frequency signals, with a frequency response up to 12 GHz. Its construction features high-quality materials, including a beryllium copper plunger and brass barrel plated with gold to ensure excellent conductivity and durability under various environmental conditions. With its wide temperature range of -45°C to +100°C, this probe adapts easily to different operational settings, making it an essential tool for testing and development in labs and field environments.
-
Product
Frequency Hopping Spread Spectrum
FHSS
-
Futaba introduced FHSS (Frequency Hopping Spread Spectrum) systems in 2010, to offer modelers a less expensive way to enjoy 2.4GHz dependability. Other advantages include extremely low latency, exceptionally fast frame rates, transmitters with no external antennas and low-cost receivers with Easy Link convenience.As the name implies, the transmitter signal of an FHSS system literally hops from frequency to frequency in a pseudorandom sequence. The combination of frequency hopping with Futaba's advanced algorithms creates 100% frequency security.
-
Product
Radio Frequency Probe HF05PCBGSG016G430MSMPmFV2
1024472
-
The HF05PCBGSG016G430MSMPmFV2 Radio Frequency Probe is designed for high-precision applications, providing exceptional performance within its operational temperature range of -45°C to +100°C. This probe is specifically engineered to maintain a consistent impedance of 50 ohms while handling continuous currents of up to 0.5A, making it ideal for a variety of consumer RF applications. Its coaxial design ensures minimal signal loss, thereby enhancing the reliability and accuracy of measurements.
-
Product
Low Frequency RF Broadband Power Sources
-
Class A has RF power source, ideal for Industrial /Scientific / Medical applications. Class AS is a robust source of RF power for ultrasonic, laser modulation, RFI/EMI, plasma generation, general laboratory and industrial applications.
-
Product
Series Low Frequency Vibration Sensors
AC136
-
Low Frequency Accelerometer, Side Exit Connector / Cable, 500 mV/g
-
Product
5 Digit Frequency Meter
CS1-F
-
CS1-F economic type Frequency Meter is designed with high accuracy measurement, display and communication of Frequency.The innovation feature is auto-range input from 0.01Hz~100KHz(option ~140KHz) and the display resolution will auto-change to show the highest according to input frequency.They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of panels and testing applications.
-
Product
Frequency Family 1 – 1000 MHz
-
A broadband amplifier that covers the 1 – 1000 MHz frequency range. This small and lightweight amplifier utilizes Class A/AB linear power devices that provide an excellent 3rd order intercept point, high gain, anda wide dynamic range.
-
Product
Pulsed And CW EPR/ESR: Synthesizers Up To 280 GHz
-
Insight Product Company offers synthesizers at frequencies from 30 to 280 GHz which can be used in EPR/ ESR experiments. These sythnesizers are designed to go swiftly from the generation to the non-generation mode and back. This process is controlled by external TTL signal. There is also the possibility to manipulate the phase, namely to shift it by 90 degrees and 180 degrees. ON/OFF switch time is approximately 2 nanoseconds.
-
Product
Signal Generator Frequency Extenders
FES
-
These frequency extension modules easily connect to the output of your signal generator so you have high-performance source for your DUT characterization activities. Characterize your DUT with the confidence that the superior performance in terms of output power, spurious and harmonic will provide product accurate results.
-
Product
Reference Frequency Generator
MFCh
-
*Frequency reproduction accuracy ± 2 x 10 -9 *Output frequency 1 Hz - 10 MHz *Output pulse signal 1 kHz The MFC is designed to generate high-frequency pulse signals with a frequency of 1 kHz and a frequency in the range from 1 Hz to 10 MHz along two output lines. The MFC is designed to operate in measuring systems based on the VXIbus trunk. In the MFC, a rubidium frequency standard is used as a reference frequency source. Time to reach the mode when the power source of the rubidium standard is turned on, no more than 10 min
