Filter Results By:
Products
Applications
Manufacturers
3D
three dimensions.
-
product
Advanced Design System (ADS) Core
W2200BP
Advanced Design System (ADS) is the flagship product from Keysight EEsof EDA, the technology and innovation leader in high-frequency, mixed-signal electronic design automation (EDA). It is the only design simulation platform that enables the co-design of IC, package and board in high-frequency and hi-speed applications. ADS seamlessly integrates system, circuit, and full 3D electromagnetic simulation with Keysight's test instrumentation to perform single pass successful electronic designs repeatedly.
-
product
Magnetic Profile Measurement
Many times it is requires to study the magnetic field profile of the 2D or 3D surface to estimate the performance of the magnetic device. The field pattern is measured by sensors and very precise mechanical arrangement. The spacing between two points of measurement can be as low as a few microns. This precise measurements can confirm the quality of performance of any device.
-
product
Gear Metrology System
The Gear Metrology System is a non-contact gear inspection system that generates a 3D point cloud, providing manufacturers with real-time metrology and inspection data to optimize production processes, and improve ROI.
-
product
X-ray Microscopy
ZEISS Xradia Versa
Extremely versatile ZEISS Xradia Versa 3D X-ray microscopes (XRM) provide superior 3D image quality and data for a wide range of materials and working environments. Xradia Versa XRM feature dual-stage magnification based on synchrotron-caliber optics and revolutionary RaaD™ (Resolution at a Distance) technology for high resolution even at large working distances, a vast improvement over traditional micro-computed tomography. Non-destructive imaging preserves and extends the use of your valuable sample, enabling 4D and in situ studies.
-
product
Optical Fiber Type Hot Phosphoric Acid Concentration Monitor
CS-620F
In 3D NAND manufacturing process, dozens of layers of SiO2 and SiN are deposited, and the SiN layer is selectively removed using hot phos.In this process, the desired etching rate can be achieved by controlling the concentration and temperature of the chemical solution.Previous products have difficulty to measure high temperature chemicals, but the CS-620F is able to measure at high temperatures up to 170 C degrees.
-
product
2D/3D AOI Series
MV-6e
- Exclusive10MP/18MPCameraTechnology- Precision Telecentric Compound Lens Design- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Extremely Simple Programming and Operation- Integrated INTELLI-SCAN® Laser Inspection System- 3D Co-Planarity Inspection of Gull-Wing Leads, BGA and CSP - - -- Devices- Enhanced 3D Solder Paste Height Measurement Capability- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
Intel® Atom™ Processor E3845 Fanless Expandable Embedded Computer with PCI/PCIe Slots
MXC-2300
Featuring the latest Intel® Atom™ E3845 processor, the Matrix MXC-2300 series excels with minimal power consumption, exceptional 3D graphics, and powerful media acceleration, delivering a leading improvement in performance and cost-efficiency over any previous generation Atom-based system.
-
product
Make Your 3D Control Smarter
VALUE ADDED SOLUTIONS
At Metrologic Group, we always seek to be a problem-solver for industrial manufacturers and quality assurance professionals. That is why, we continuously develop improvements of our software and complementary solutions to respond or even outreach customer expectations.
-
-
product
Semi-Automatic Probe Sheet Resistance/Resistivity Measurement
CRESBOX
• Multi-points measurement and Mapping display- 2-D map / 3-D map graphic display- Multipoint pattern measurement is programmed (maximum 1225 points) and random pattern is programmable by operator.• Film thickness conversion function from sheet resistance• Measurement data base link with Excel via CSV format file• Software language can be switched in English /Japanese by operator
-
product
Digital Automated Fiber & Ferrule Interferometer For Single Fiber Connectors
DAFFI SF
The latest interferometer from Data-Pixel is a cost effective solution for high volumes production, without compromising on accuracy or performance. Based on our extensive interferometer manufacturing experience we designed the DAFFI SF to be robust, fast and accurate in order to meet all manufacturing or laboratory environments. With the Blink software platform, DAFFI is able to measure the end face geometry on single fiber connectors in a very short time. The Daffi interferometer accessories (flange and adapters) are fully compatible with the Daisi range, allowing the user to limit the costs of the 3D geometry measurement units.
-
product
3D Verification Station
Omron’s 3D verification systems provide high-quality imagery to ensure the best results in post-solder inspection.
-
product
Fast Particle Sizer Spectrometers
To measure rapidly-evolving aerosols (such as engine or 3D printer emissions), you need a particle sizer that can keep up. TSI has several fast particle sizer spectrometers that are designed for such situations. Whether your application requires 1 Hz (or faster) size distributions, a soot-specific data inversion, or sample dilution, TSI has a fast sizing solution.
-
product
All-in-one Software Product
Merlic
MVTec MERLIC is an all-in-one software product for quickly building machine vision applications without any need for programming. MERLIC provides powerful tools to design and build complete machine vision applications with a graphical user interface, integrated PLC communication, and image acquisition based on industry standards. All standard machine vision tools such as calibration, measuring, counting, checking, reading, position determination, as well as 3D vision with height images are included in MVTec MERLIC.
-
product
One-Piece Optical Sensor Head
OP
Sciences et Techniques Industrielles de la Lumière
OP series consists of a one-piece optical sensor head for dedicated applications (e.g. long distance).The performance and specifications are dedicated to various applications in the industry.Typically integrated as OEM for measuring 3D shapes, glass thickness, autofocus, OP series fits a wide range of applications.
-
product
ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS
METRASCAN-R
Part of the MetraSCAN 3D line-up, the robot-mounted MetraSCAN-R optical CMM 3D scanning systems are fast and accurate scanning solutions designed for 3D automated inspection of parts on the production line and on the shop floor. In combination with industrial robots, the MetraSCAN-R series increases the reliability, speed and versatility of on-line inspection and quality control (QC) process.
-
product
3D Electromagnetic Simulation Software
Efield® offers a complete and unique integrated modelling and simulation environment for 3D analysis of a wide range of electromagnetic applications such as: Antenna design All kind of antennas including horn, reflector, wire and microstrip antennas as well as broadband antennas and antenna arrays. Antenna integration Radiation pattern of installed antennas on large platforms such as aircraft or ships. Coupling between installed antennas. Microwave design Typical applications includes design of filters, connectors and couplers. EMI/EMC interaction Analysis of a wide range of EMC/EMI problems including shielding and coupling. Scattering & radar cross-section RCS analysis of structures such as aircraft, ships, air-intakes, exhausts, and antennas.
-
product
SMARC
ROM-5720
Advantech ROM-5720 SMARC 2.0/2.1 Computer-on-Module is powered by NXP i.MX8M SOC which includes dual and quad-core Arm Cortex-A53 processors in combination with one Cortex-M4 real time processor and the Vivante GC7000 Lite 3D graphics engine. It provides USB3.0, two Gigabit Ethernet, two MIPI-CSI, PCI Express, and HDMI2.0 up to 4096 x 2160 at 60 Hz and MIPI-DSI for embedded applications. It's the ideal solution for transportation, infotainment, vending, Medical.
-
product
3D Cameras
*Visual assessment of distance, level or volume*Time-of-flight measurement principle*Illumination, measurement and evaluation in one unit*Output of distance and grey values*Integration by means of intuitive parameter setting software
-
product
Volume Checker
Gocator
For Volume Gauging of Cylinder Heads and Piston Bowls in Small to Medium-Sized Internal Combustion Engines. Gocator snapshot sensor w/ custom measurement tools. 3D non-contact measurement. Replaces traditional optical methods such as fluids, pressurized air, acoustics. Easily handles shape variation. Stereo camera minimizes occlusions.
-
product
Partial Discharge Testing Equipment
AR700
PD Defect Location in High-Voltage Equipment Insulation by Acoustic Sensors To act on deteriorating insulation the source of PD must be known.The insulation defects produce partial discharges, which emits electrical impulses, radiation of electromagnetic waves as well as acoustic signals.The AR700 measures acoustic signals with multiple sensors spread over the transformer. Then the software determines the failure location using the time difference of all incoming signals. Finally, these coordinates are shown in a 3D model of the transformer. AR700 device is used for measuring of acoustic signals on the external surfaces of gas-insulated breakers and substations, power transformers and other tank high-voltage equipment. The acoustic signals are caused by partial discharges in the insulation, which is the sigh of the defects.The advantage of “AR700” device is the quick installation of the acoustic PD sensors on the external surface of high-voltage equipment tank. The sensors have magnetic holder that is why there is no need to de-energize the equipment for the sensors installation. “AR700” device has 4 syn-chronic channels for acoustic signal measurement. This gives the possibility not only to find the defects in the insulation, but also to locate them. The location function of the “AR700”device is unique for acoustic devices.
-
product
Teledyne PDS Liteview Freeware 3D Viewer for PDS Data Files
Teledyne PDS LiteView is a freeware 3D viewer that can be used to view Teledyne PDS data files. The viewer will read the Teledyne PDS logdata files, grid model files, 3D design model files and GeoTIFF files. The multibeam and laserscanner data will be extracted from the logdata files and will be visible in the viewer.
-
product
Automated Optical Inspection (AOI)
TR7700 SIII 3D
TRI’s ground breaking 3D AOI solution delivers the fastest hybrid PCB inspection combining optical and blue-laser-based true 3D profile measurement for the highest automated defect symptom coverage possible. Integrated state-of-the-art software solution and third generation intelligent hardware platform offer stable and robust 3D solder and component defect inspection and with high inspection coverage and easy programming.
-
product
CPU RightMark
CPU RM
The CPU RightMark suite is meant for objective measurement of performance of modern and future processors in different computational tasks such as numerical modeling of physical processes and solving of 3D graphic problems. It focuses on testing the loaded FPU/SIMD units and the CPU/RAM tandem. As a result, we get pure CPU performance, an objective parameter obtained without the influence of other subsystems, like video and disc systems, except the memory one. It allows us to compare the true performance of different processors irrespective of a type of other system components. It's obtained by dealing only with the CPU and measuring the CPU time spent for execution of computational tasks.
-
product
Revopoint MetroX: Blue Laser Line and Full-field Structured Light 3D Scanner
4 Flexible Scanning Modesꔷ Metrology-grade Accuracy: Up to 0.03 mmꔷ Volumetric Accuracy: Up to 0.03 mm + 0.1 mm × L(m)ꔷ Up to 7,000,000 Points/s in Full-field Structured Light Modeꔷ Up to 800,000 Points/s in Multi-line Laser Mode
-
product
Easy3DMatch
Align a scanned 3D object with another scan or with a reference meshCompute the local distances between 3D scans and a golden sample or reference meshDetect anomalies such as misplaced features, geometric distortions, gaps, bumps,...Compatible with all 3D sensors that produce point clouds, depth maps or height maps
-
product
3D Scanner
Artec Eva
This structured light 3D scanner is the ideal choice for making a quick, textured and accurate 3D model of medium sized objects such as a human bust, an alloy wheel, or a motorcycle exhaust system. It scans quickly, capturing precise measurements in high resolution, which allows for almost unlimited applications, without the use of additional equipment.
-
product
USB Stereo Camera For NVIDIA GPU
TaraXL
TaraXL is a USB Stereo camera which is optimized for NVIDIA® Jetson AGX Xavier™/TX2 and NVIDIA GPU Cards. TaraXL's accelerated Software Development Kit (TaraXL SDK) is capable of doing high quality 3D depth mapping of WVGA upto 60fps. This 3D stereo camera is based on MT9V024 stereo sensor from ON Semiconductor.
-
product
Dissolved Ammonia Delivery System
DI-NH3
MKS' DI-NH3 is a compact, stand-alone system providing dissolved ammonia water. With Semiconductor 3D IC architectures using new materials like Cu-Co and Si-SiGe, the ability to wet clean with precise alkaline chemistries is growing in frequency and importance. The DI-NH3 delivers dissolved ammonia, providing optimal cleaning capability in an alkaline chemistry, minimizing material loss and contamination and inhibiting Electrostatic Discharge (ESD). Using closed-loop control, conductivity and pressure are kept stable under changing flow conditions. The dissolved ammonia concentration is monitored and adjusted, delivering the specific NH4OH concentration needed. Dissolved ammonia’s alkaline chemistry provides ESD protection during rinsing, particle lift-off, and residual photoresist removal in middle-of-line (MOL) and prevents corrosion of cobalt/copper interfaces.
-
product
Optical Coherence Tomography (OCT) systems
dOCTor™
dOCTor™ Optical Coherence Tomography (OCT) systemsoffer very high quality non-invasive tissue imaging in 2D and 3D. They are ideal for: In-Vivo Imaging Small Animal Imaging Tissue Engineering and Visualization Developmental BiologydOCTor systems are available in Swept-Source(SS) OCT and Time-Domain (TD) OCT configurations to satisfy different application imaging needs.
