Current Preamplifiers
-
Product
Handheld Digital Multimeter, AC/DC Current, AC/DC Voltage, Capacitance, Resistance, True RMS
72-2995
-
40,000 count industrial True RMS digital multimeter is a highly versatile handheld instrument boasts 5-1/2 digit TRMS accuracy. It provides AC/DC voltage and current measurement, resistance, capacitance, temperature and frequency measurement, displaying readings on a backlit LCD digit and analogue bargraph display. Other features include non-contact voltage detection, continuity and diode test and USB data logging. All this is housed in a rugged overmolded enclosure with carry case, test leads and USB interface cable included.
-
Product
PXI/PXIe Wide Current Range Multiplexer Module, Single 24-Channel, 1-Pole
42-514-108
Multiplexer Module
The 40-514-107 (PXI) and 42-514-107 (PXIe) are low density multiplexers in dual 12-channel, 1-pole configuration. They are capable of switching a wide range of current, from 10 μA to 2.5 A at 220 VDC/250 VAC. The current capability of the module permits the use of a single module type for both low and medium current test applications.
-
Product
Split type AC Current Transformer
CTS-300
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*5A output for metering application.*Short circuit switch for secondary output is provided for safe operation.*High accurate transformer for the application of first class meter.*Easy to install by metal fitting.
-
Product
Clamp type AC Current Sensor／for Low Leakage Current Measurements(ZCT Series)
ZCT-110S
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*Best sensor for low leakage current measurements of less than 1mA.*Suitable for low current measurements of terminal feeder.*High sensitivity and least affection from external magnetic field.
-
Product
Leakage Current Monitor
-
To alert utility-line workers of overcurrent conditions on such aerial devices as insulated ladders and truck booms, the Chance Sentinel sounds an alarm if leakage current reaches a pre-set level.
-
Product
Open Loop Current Sensor
C03 30A
-
The C03 offers efficient and precise sensor solutions for direct, alternating and pulsed currents in industrial, commercial and communication systems. It consists of three main components: an accurate, linear Hall sensor with low temperature drift, a flux collector and a transformer. It is characterized by a very low resistance and thus lowers power loss and temperature drift - for optimal performance.
-
Product
PXI/PXIe Wide Current Range Multiplexer Module, Single 12-Channel, 2-Pole
40-514-105
Multiplexer Module
The 40-514-105 (PXI) and 42-514-105 (PXIe) are low density multiplexers in single 12-channel, 2-pole configuration. They are capable of switching a wide range of current, from 10 μA to 2.5 A at 220 VDC/250 VAC. The current capability of the module permits the use of a single module type for both low and medium current test applications.
-
Product
Process Voltage & Current Data Loggers
-
Monitor and log virtually any process voltage or current output from your transducers.
-
Product
Eddy Current Testing
-
Zetec is the industry leader for cost-effective eddy current testing in complex applications. We have the most extensive experience, and we develop the highest quality ECT inspection products. When it comes to understanding your needs, we’re your trusted advisor. And from instrumentation to probes to software, you can count on us to provide a complete inspection solution that will help you realize a cost savings in the long run. etec Eddy Current technology and products provide a fast efficient solution for near surface anomalies in conductive material
-
Product
Measuring Device for Testing the Effectiveness of Residual Current Protective Devices (RCD) According to DIN EN 61557-6 (VDE 0413-6)
-
PeakTech Prüf- und Messtechnik GmbH
A residual current tester, which is used to determine tripping currents and the tripping times of residual current circuit breakers, which are used in every new building according to current building regulations. Residual current circuit breakers are used for personal protection and switch off a circuit when a residual current is registered which flows off via the protective earth (PE).
-
Product
PXI/PXIe Battery Simulator Module, 2-Channel, Simplified Current Sink, 750 V Isolation
41-752A-903
Battery Simulator
Targeting EV, automotive, aerospace, energy storage and electric aircraft applications, the new battery simulator modules occupy a single PXI slot. These 2-channel battery simulators are capable of supplying up to 7 V and 300 mA per channel. The channels are fully isolated from ground and from each other, allowing series connection to simulate batteries in a stacked architecture.
-
Product
High Current Probes (Inverter Testing) HCB166B12ALS90
1045058
-
The High Current Probes (Inverter Testing) HCB166B12ALS90, with order code 1045058, is designed for high-performance testing applications in various industries. This basic contact probe features a robust design that can withstand extreme temperatures ranging from -45°C to +200°C, making it suitable for applications that demand reliability in harsh environments. With a continuous current rating of 400A and a typical contact resistance of only 0.10 mOhm, this probe guarantees efficient performance and accurate testing results, essential for inverter testing and other critical applications.Engineered with mechanical specifications in mind, the HCB166B12ALS90 boasts a preload of 500cN and spring force of 9000cN, along with a nominal travel of 4.40mm to ensure precise engagement. The probe is constructed using high-quality materials, including a silver tip style, beryllium copper plunger, and gold plating on the plunger and barrel, ensuring excellent conductivity and durability. The dimensions of the probe, with a total length of 65.50mm and a tip diameter of 3.00mm, are optimized for ease of use and versatility in various connection types. Overall, this probe is a vital tool for electrical testing professionals seeking reliability and high performance.
-
Product
Split Core Current Transformers
LZCK-55
-
Beijing GFUVE Electronics Co.,Ltd.
Outdoor waterproof current transformers are applicable for AC power system 35kV and measurement of current of power supply equipment below 10KV also can be used for microcomputer protection. This type of current transformer employs imported silicon steel which with high permeability as magnetic material, has the characteristics of Small magnetic circuit loss and can be split, its semicircular core and secondary windings employ high quality epoxy resin vacuum, casting in plastic-case(ABS or PC) which is flame retardance anti-moisture, stable performance, no maintenance.
-
Product
Preamplifier, 100 MHz to 18 GHz
87405C
Amplifier
Exceptional gain (25 dB) and flatness (1.5 dB) combined with a probe-power bias connection which eliminates the need for an additional DC power supply, makes these preamplifiers the ideal choice for spectrum analyzer or stand alone applications.
-
Product
High Current Probes (Battery Contacting) HCF33806B500G1000A
1148991
-
The High Current Probes (Battery Contacting) HCF33806B500G1000A, with order code 1148991, represent an advanced solution for high-performance electrical connections. Designed specifically for extreme environments, these probes can withstand temperatures ranging from -45°C to +200°C. This makes them ideal for applications requiring reliability under drastic thermal conditions. Their robust construction features a basic contact probe design that ensures optimal contact performance and durability during usage. With a continuous current capacity of 75A and a typical contact resistance of just 5 mOhm, these probes are engineered for efficiency and low power loss, making them suitable for a wide range of automated assembly processes and sophisticated battery systems.
-
Product
Broadband Current Probes
-
Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes. The BCP-5xx EMC Current Probes are designed to permit field intensity meters, spectrum analyzers, and other 50W impedance instruments to measure quantitative magnitudes of current.
-
Product
Precision Voltage and Current Sources
VI-700
-
The VI-700 Voltage and Current Source is a versatile precision dialable or remotely programmable voltage and current source. Its three ranges provide up to 20 V full scale (200 V with the HV option), and down to 100 mV resolution; and 20 mA full scale down to 0.1mA resolution. Both voltage and current outputs are available simultaneously. The output is set by a range selector and thumbwheel switches in the LOCAL mode, or by a digital input at the rear panel. The REMOTE mode control can be a RS232 or IEEE-488 interface.
-
Product
High Current Probes (Power Electronics) H735M3
1019242
-
The H735M3 High Current Probes are meticulously engineered for power electronics applications, offering superior performance and precision. With a pitch of 5.00 mm (or 197 mil), these probes provide the reliability essential for high-current measurements. Their compact design includes a total length of 44.00 mm, an outer diameter of 4.00 mm, and a press ring diameter of 4.30 mm, allowing for seamless integration into various electronic setups.
-
Product
Current Converter AC
NMTI 2
-
A modern multipurpose quantity-to-current loop converter designed for installation in switchboards.
-
Product
PXI/PXIe Battery Simulator Module, 4-Channel, V/I Readback, Simplified Current Sink, 750 V Isolation
43-752A-912
Battery Simulator
Targeting EV, automotive, aerospace, energy storage and electric aircraft applications, the new battery simulator modules occupy a single PXI slot. These 4-channel battery simulators are capable of supplying up to 7 V and 300 mA per channel. The channels are fully isolated from ground and from each other, allowing series connection to simulate batteries in a stacked architecture.
-
Product
Current Meter
MTD32
-
The mezzanine module (mezzanine) MTD32 is designed to measure instantaneous current values over 32 channels.
-
Product
Eddy Current Chassis Dynamometers
-
Cradle- or single-roll (top-mount) dynamometers accommodating single- or tandem-axle vehicles, with continuous vehicle power ranges from 50 hp to 622 hp (37 kW to 464 kW), Taylor’s chassis dynamometers allow a top recommended speed of 90 mph (145 kph) at full load. Look to our experts to not only help you select your optimal system, but also to provide design, configuration, installation and training for a total solution that integrates seamlessly with your operation.
-
Product
High Current Probes (Power Electronics) HCF73312A300U300
1010643
-
The High Current Probes HCF73312A300U300, with order code 1010643, are designed for use in power electronics, offering exceptional performance in demanding applications. These probes feature a basic contact design that supports continuous currents of up to 30A, while maintaining a low typical contact resistance of only 8 mOhm. Capable of operating in a temperature range from -45°C to +200°C, the probes ensure reliable functionality across diverse environments. With a compact pitch size of 4.00 mm, they are suitable for precise applications where space can be a constraint.
-
Product
Multi Circuit DC Current Monitor (16 channels)
MCM-1600PV
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
Measuring･display of DC current values generated by PV systems and DC load current of related apparatus in multi circuit successively for a long term as well as memorizing the average current values between the intervals, of which data can be transmitted to PC in Excel File.
-
Product
GAOTek Portable H/L Voltage Clamp Current Leaker
GT00YA00ZX
-
The GAOTek Portable H/L Voltage Clamp Current Leaker measures high voltage current with a 12.5 in (32 cm) insulating rod, adopting the latest CT technology and integrating mask digital technology. This instrument provides high precision, reliability, and stability with its integrated design between transducer clamp and domain. This leaker can be used to measure any wire with or without the insulation layer where the voltage is below 10 kV. The insulating rod is portable, moisture resistant, heat resistant, shock resistant, and insulating. It provides additional functionalities such as online current testing, peak and data holding, data storage, detection of high and low current in primary and secondary circuits separately, and provision of suitable calculations to conclude change in high and low pressure.
-
Product
High Current Probe HCF71312B230G150
1024198
-
The HCF71312B230G150 High Current Probes are designed specifically for power electronics applications, promising exceptional performance and reliability. These probes feature a robust construction, allowing for continuous current handling of up to 30A while maintaining a low typical contact resistance of only 8mOhm. With a temperature range of -45°C to +200°C, the HCF713 series is versatile enough to handle demanding environments without compromising performance. The design includes a basic contact probe with a pitch of 4mm, ensuring precise connections essential for various electronics testing scenarios.
-
Product
Current Probe
PA-659
-
*Maximum Current Value: +/- 150ADC, 100A RMS*1mA = 5mA, 50mA (switchable)*Rising Time: 0.7uS*Bandwidth: DC ~ 500kHz*Over Range Indicator*Battery, AC Power Supply Adaptor (free), dual usages
-
Product
High Current Probes (Power Electronics) HCF77512A300U500HP
1030816
-
The High Current Probes (Power electronics) HCF77512A300U500HP provide exceptional performance and durability tailored for rigorous applications in power electronics. With an ability to handle continuous currents of up to 50A and a temperature range from -45°C to +200°C, this probe is designed to meet modern electrical engineering demands. The robust construction features a beryllium copper plunger with a gold plating, ensuring superior electrical conductivity and resistance to corrosion.
-
Product
High Current Probes (Power Electronics) HCF32007S135N130
1003391
-
The High Current Probes (Power electronics) HCF32007S135N130 are designed for precision applications in various electronic environments, ensuring reliability through their robust and high-performance features. With a continuous current rating of 12.00 A, these probes are capable of handling significant loads while maintaining a low typical contact resistance of 20 mOhm, making them ideal for power electronics testing and integration. The temperature range of -45°C to +200°C ensures functionality in diverse operating conditions, while the basic contact probe design contributes to their versatility in various applications.
-
Product
AC Current Digital Clamp Meters
-
Precision Mastech Enterprises Co.
Handheld, safe, and non-contact electrical tools designed to measure alternating current (AC) without disrupting the circuit
