Product

Diode Arrays

-

Bourns

Bourns

a silicon diode with minimal packaging overhead. The small signal 0603, 1005 and 1206 Chip Diodes are lead free with Cu/Ni/Au plated terminations while the other packages (SMA, SMB, SMC, 1408, 1607, 2010, 2419, 8L NSOIC, 16L NSOIC, SOT23, SOT23-6, 16L WSOIC) use 100 % Tin terminations. All Bourns® diodes are compatible with lead free manufacturing processes, conforming to many industry and government regulations on lead free components.

Product

Photodiodes & Arrays

-

Excelitas Technologies Corp.

Excelitas Technologies Corp.

Excelitas utilizes Silicon and InGaAs materials for our photodiodes to provide detection from 220 nm to 1700 nm. These devices are offered in a variety of sizes to meet customer sensitivity and speed requirements.  Many different types of photodiodes are available to serve various unique applications.

Product

Linear Detector Arrays (LDAs)

X-Scan H

-

Detection Technology Inc.

X-Scan H - Detection Technology Inc.

This digital end-to-end solution is built on a proven concept enabling easy integration, and accelerated development time of X-ray systems. X-Scan H series has high radiation hardness extending lifetime of detectors significantly, and reducing total costs. The series is available in several standard lengths easily scalable to various configurations.

Product

Chip Resistor Networks/Arrays

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

Panasonic’s Chip Resistor Arrays are offered in cases from 0201 to 0805. The smaller 0201 case sizes are available with flat terminations and all other case sizes are offered with either convex or concave terminations. The EXB Series Resistor Arrays are available in 2, 4, or 8 Resistors per package. These Resistor Arrays allow for an improvement of the placement efficiency. Compliance Standards include: IEC 60115-9, JIS C 5201-9, EIAJ RC-2129, AEC-Q200 and RoHS.Panasonic’s Resistor Networks are available in 8 or 15 bussed Resistors and are recommended for all pull up/down circuits.

Product

Double LED Arrays | Bi-Color | 20 MA

LED-D-bc-20

-

ELMA Electronic, Inc.

LED-D-bc-20 - ELMA Electronic, Inc.

Pre-mounted double LED, high luminosity with low power consumption and adapt to DIN41494

Product

Single LED Arrays | Bi-Color | 20 MA

LED-S-bc-20

-

ELMA Electronic, Inc.

LED-S-bc-20 - ELMA Electronic, Inc.

Pre-mounted single LED, high luminosity with low power consumption and adapt to DIN41494

Product

Double LED Arrays | Green / Green | 2 Or 10 MA

LED-D-g/g-2/10

-

ELMA Electronic, Inc.

LED-D-g/g-2/10 - ELMA Electronic, Inc.

Pre-mounted double LED, high luminosity with low power consumption and adapt to DIN41494

Product

Impadence Measurement on Multielectrode Arrays

MEArack

-

Sciospec

MEArack - Sciospec

Well established in electro-physiological research the standard form factor multielectrode arrays (MEAs) are one of the go-to standards when it comes to impedance measurements on cell cultures.

Product

Chip Scale TVS Arrays

-

Protek Devices

Protek Devices

ProTek's patented* Flip Chip TVS Arrays are designed for small circuit board applications with limited size and space availability. To reduce installation costs, the Flip Chip can be mounted directly onto the printed circuit board; similar to chip resistors and capacitors. These devices are ideal for use in portable electronics such as Cellular Phones, Cellular Phone Accessories, Personal Digital Assistants (PDAs), Laptops and Pagers.

Product

Double LED Arrays | Red / Red | 2 Or 10 MA

LED-D-r/r-2/10

-

ELMA Electronic, Inc.

LED-D-r/r-2/10 - ELMA Electronic, Inc.

Pre-mounted double LED, high luminosity with low power consumption and adapt to DIN41494

Product

Double LED Arrays | Red / Yellow | 2 Or 10 MA

LED-D-r/y-2/10

-

ELMA Electronic, Inc.

LED-D-r/y-2/10 - ELMA Electronic, Inc.

Pre-mounted double LED, high luminosity with low power consumption and adapt to DIN41494

Product

SINE (Sinusoidal) Targets & Arrays

-

Applied Image, Inc.

Applied Image, Inc.

Sinusoidal Target Arrays have been recognized as a superior test method for a variety of applications, from moiré contouring to reliable MTF Evaluation of materials, lenses, cameras, and electro-optical systems (Follow the hyperlink to learn about using Sinusoids for MTF eval). Sinusoidal Pattern Arrays are manufactured on two different materials for both reflective and transmissive applications. Because of the inherent limitations of reflective materials, the maximum spatial frequency of the reflective pattern arrays is limited to 20 cycles per mm, while the transmission film arrays are offered in various sizes up to 256 cycles per mm. In addition, the sinusoidal arrays are available in a Single Frequency Grating or with Multi-Frequency Gratings. If instead of continuous sinusoidal frequency, you are looking for a square wave frequency design, then look to the Ronchi Gratings page. Should you need to alter the size of the pattern or the substrate, fill out our Custom Test Targets and Charts form and start the conversation.

Product

Full Performance and Flexibility on ECIS 8 Well Arrays

Sciospec ECIS Adapter

-

Sciospec

Sciospec ECIS Adapter - Sciospec

The ECIS CULTUREWARE 8 well arrays are a very common choice for a broad range of impedance-based cell experiments like cell groth, cell migration, wounding/healing, barrier function, tox-screening, adhesion and proliferation studies. With the Sciospec ECISadapter you can bring your ECIS experiments to the next level: more speed, higher resolution, more possibilities. Harness the full power of Sciospec impedance analyzers on your existing ECIS arrays. The ECISadapter just plugs into compatible Sciospec impedance analyzers like the ISX-3 and you´re good to go.

Product

2D Near-Field Analysis of VCSEL Arrays

VTC 4000

-

Instrument Systems Optische Messtechnik GmbH

VTC 4000 - Instrument Systems Optische Messtechnik GmbH

The VTC 4000 near-field camera from Instrument Systems was specially developed for the ultrafast, precise 2D analysis of VCSEL arrays. It enables polarization-controlled characterization of all relevant parameters simultaneously for the single emitters of the array.

Product

SQUID Series Arrays

-

Magnicon GmbH

Magnicon GmbH

The SQUID series arrays are ideal for readout of TES sensors or as amplifier stage for discrete two-stage applications. Integrated bias resistors for TES or two-stage applications reduce wiring complexity. Various arrays with input inductances of 3 to 6 nH, input sensitivities of 17 to 23 µA/Phi0, and a current noise between 5 and 10 pA/sqrt(Hz) @ 4 K are available.

Product

Double LED Arrays | Yellow / Yellow | 2 Or 10 MA

LED-D-y/y-2/10

-

ELMA Electronic, Inc.

LED-D-y/y-2/10 - ELMA Electronic, Inc.

Pre-mounted double LED, high luminosity with low power consumption and adapt to DIN41494

Product

Testing and Training Solutions

-

Teledyne LeCroy

Teledyne LeCroy

Teledyne LeCroy offers an broad array of testing services and educational training options. From advanced multi-day protocol training courses to device interoperability testing to calibration and testing service, Teledyne LeCroy offers valuable expertise, in-depth knowledge, leading edge testing solution, and top-notch engineers able help move your projects forward. Whether you need your team to come up to speed on the latest technology or you just need more hands getting your product tested and ready for market, we can help.

Product

Custom Optical Components and Standards

-

Applied Image, Inc.

Applied Image, Inc.

With the amount of applications that optical components have, no one could hope to have the perfect component for every possible scenario. For this reason, APPLIED IMAGE makes easy the process of designing, building, and delivering custom components to our customers. Our engineering process is designed to produce the best parts in the industry and more importantly, the best component for your specific needs. The APPLIED IMAGE experience will cover the project with expert engineers from start to finish. Use the form below to start the conversation for checkerboard and dot arrays, stage and image analysis micrometers, reticles and machine vision components.

Product

NAM (Network Acquisition Module)

-

Güralp Systems Ltd

Güralp Systems Ltd

The NAM is a stable, robust data hub with unrivalled configurability, ideal for large or complex regional and national seismic arrays and other multi station monitoring solutions.

Product

Serial FPDP Rugged Rackmount Recorder

Talon RTR 2756

-

Mercury

Talon RTR 2756 - Mercury

- Designed to operate under conditions of shock and vibration- Complete Serial FPDP record and playback system- Up to 8 I/O channels in a single 4U 19-inch rugged rackmount PC server chassis- Removable SSDs- Up to 38.4 terabytes of storage to NTFS RAID disk array- Copper, single-mode and multi-mode fiber interfaces available- Real-time aggregate recording rates of up to 5 GB/sec in eight-channel configuration- Supports Flow Control, CRC, and Copy/Loop Mode as a receiver and transmitter- Supports 1.0625, 2.125, 2.5, 3.125 and 4.25 GBaud link rates- RAID levels of 0, 1, 5, 6, 10 and 50- Optional N+1 redundant power supply- SystemFlow® GUI virtual instrumentation panel for fast, intuitive operation- C-callable API for integration of recorder into applications- File headers include time stamping and recording parameters- Optional GPS time and position stamping- Windows® 7 Professional workstation with high performance Intel® Core™ i7 processor

Product

Flexible Data/Analog Switching System

S6025DE

-

Universal Switching Corporation

S6025DE - Universal Switching Corporation

Designed for parallel switching of RS-232 data or other similar types of data, the S6025DE delivers compact solid-state switching in an expandable configuration. The unit can start as a smaller size and be expanded later to a full 60x60 array with 25 levels, perfect for switching RS-232 type data. It provides a choice or a combination of remote control including RS-232C, RS-422A, RS-485, GPIB (IEEE-488) and Ethernet (10base-T). 

Product

IDA Electrodes

-

ALS Co., Ltd

ALS Co., Ltd

Interdigitated Array (IDA) electrode is an electrode developed for electrochemical measurements to be performed in a very small quantity of the sample. IDA electrode could be applied for the detection and reaction analysis of the compounds in a small quantity of the sample. IDA electrode is a microelectrode pattern fabricated by using the lithography technology. The Electrodes are composed of 65 pairs. In each one of the pair has a function of the oxidation and reduction electrodes.

Product

MWIR Systems

-

L-3 Cincinnati Electronics

L-3 Cincinnati Electronics

L3 Cincinnati Electronics’ high-performance cooled mid-wave (3.5 – 5.0 µm) IR imagers are based on our patented InSb focal plane array architecture. Ideal for all combat conditions, L3 Cincinnati Electronics technology improves situational awareness in combat intelligence, sighting & tracking systems, threat deterrence and perimeter & border security with all-weather observation, day or night. These IR sensors can be utilized in urban, rural and remote situations where there are extreme climatic and terrain conditions. Well-suited for fixed or portable payloads, these imaging systems offer a substantially lower total life-cycle cost in comparison to other commercial IR imaging sensors.

Product

Single Shot Third-order Cross- Correlator

Rincon SS

-

Del Mar Photonics, Inc.

Rincon SS - Del Mar Photonics, Inc.

Specifically developed for measuring a wide array of output parameters from ultrafast laser systems including: contrast ratio of laser pulses, determining pulse pedestal, pre- and post-pulses, and amplified spontaneous emission in femtosecond systems.