Product

LUTHER & MAELZER BARE BOARD TEST PINS

SERIES LMP 78

-

Test Connections Inc.

SERIES LMP 78 - Test Connections Inc.

Materials and Finishes MATERIAL: Heat treated beryllium copper FINISH: 24 Kt gold plate over hard electroless nickel

Product

PCBA & Bare Board Cleanliness Tester

Zero-Ion G3

-

Manncorp

Zero-Ion G3 - Manncorp

For two decades, thousands of electronics assemblers have relied on the Zero-Ion cleanliness testing to verify the cleanliness of post-reflow printed circuit assemblies and bare boards. Over time, as PCB assemblies have become more complex and more densely populated with surface mount components, and as vigorous quality standards such as ISO, TQM and Six Sigma have become commonplace, the ability to meet—and confirm—cleanliness levels has grown in importance. The Zero-Ion ROSE tester has kept pace with customer requirements, and the Zero-Ion G3 is the most advanced Zero-Ion ever designed, capable of testing assemblies reflowed with any solder paste, including no clean—yet its also one of the most affordable cleanliness testers on the market as well, with performance and ease of use second to none.

Product

BARE BOARD TEST PROBES

-

Test Connections Inc.

Test Connections Inc.

Probe Technical DataMechanicalMINIMUM CENTERS: .100 (2.54)FULL TRAVEL: .160 (4.06)WORKING TRAVEL: .107 (2.72)OPERATING LIFE: 1,000,000 cyclesElectricalMAXIMUM CURRENT: 5 amps continuousat working travel, non-inductiveRESISTANCE: At 35 mA test current60 18 mOHMS mean63 60 mOHMS meanMaterials and FinishesPLUNGER: Heat treated beryllium copper60 24 Kt gold plated over nickel63 24 Kt gold plated over nickelBARREL: Nickel silver60 24 Kt gold plated ID and OD over nickel63 No FinishSPRING: Music Wire, 24 Kt gold platedover nickel

Product

Spring Probe For Testing Bare Board And/or PCB

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

You can see Spring Probe for testing bare board and PCB here. Standard pitch is from 0.5mm to 3.0mm.

Product

LUTHER & MAELZER BARE BOARD TEST PINS

SERIES LMP VZ

-

Test Connections Inc.

SERIES LMP VZ - Test Connections Inc.

Materials and Finishes MATERIAL: Heat treated beryllium copper and music wireFINISH: 24 Kt gold plate over hard electroless nickel

Product

NON-CONTACT TEST COMPATIBLE Ultra High Speed Bare Board Tester System(ALL-IN-ONE UNIT)

SX-750SUPERⅣC

-

OHT Inc.

SX-750SUPERⅣC - OHT Inc.

All-in-one Compact Size TesterAll-in-One type Tester, with built-in PC in the Tester main unitImproved operability with a 10.4" Touch PanelAll the operation screens are optimized for touch-pannel operation.

Product

Bare Board Electrical Testing

ProbeMaster

-

PentaLogix

ProbeMaster - PentaLogix

ProbeMaster is the complete software solution to your shops needs in bare board electrical testing. ProbeMaster is PentaLogixs top-of-the-line software package that combines all of the power of the PentaLogix CAM and Fixturing packages with support for moving probe, Netlist Comparison and other robust features.

Product

Bare Board Tester

1232

-

HIOKI E.E. Corp

1232 - HIOKI E.E. Corp

High-Precision Batch Fixture-Type Testing System that Support Boards with Embedded Passive and Active Devices. The 1232 is a bare board tester that utilizes the full range of Hioki’s in-circuit testing technologies to deliver LSI reliability testing, complex component separation testing, high continuity and insulation testing, and more. (Double-sided alignment) Testable board dimensions: 50 × 50 to 330 × 330 mm (including clamp area) • Support for build-up boards that require resistance guarantees.

Product

Flying Probe Tester

FA1817

-

HIOKI E.E. Corp

FA1817 - HIOKI E.E. Corp

Flying Probe Tester FA1817, an automatic testing system designed to inspect printed wiring on bare boards. The FA1817’s features and capabilities make it ideal for use in inspecting high-density printed wiring boards. With support for a broad range of test types, from low-resistance measurement to high-insulation-resistance measurement, the system reliably detects the latent defects that trouble end-users.

Product

Test Probes

E-Series

-

Equiptest Engineering Pte Ltd

E-Series - Equiptest Engineering Pte Ltd

Your product descriA full portfolio designed for general purpose test on bare boards, surface mount assemblies and other forms of test specially to meet any needs.ption goes here.

Product

General Purpose Test Probes

-

Coda Systems Ltd.

Coda Systems Ltd.

Low profile, short travel test probes for restricted space applicationsApplications where long travel is not required such as thin film/hybrid circuits or bareboard PCB testingReplaceable test probe by use of a receptacle

Product

RF Prototyping Kit

VXI-5501

-

ICS Electronics

VXI-5501 - ICS Electronics

* VXI-5501 has a Bare Copper-clad Prototyping Board for RF and microwave modules.* Includes a VXI-5524 Register Based Interface Board with 48 digital IO lines and a 16-bit VXI data bus.* User configurable model number, manufacturer ID, version and serial numbers identifies the module as from your company.* Includes a blank front panel, side shields, manual, layout aids and VXI-Kit hardware for a single slot wide C-size module.

Product

Electrical Tester Grid Field

-

Test Connections Inc.

Test Connections Inc.

TCI can furnish grid spring probes for most Bare Board Electrical Testers in production at most Printed Circuit Board Manufactures. Look for your model of Bare Board Tester in the following list and call TCI for current price quotation.

Product

Board Test Fixture Probes

-

Smiths Interconnect

Smiths Interconnect

Offering a wide range of standard spring contact probes to meet your testing requirements and has long been recognized as the world’s largest probe manufacturer. With over 60 different probe series ranging from 0.02" (0.51 mm) to 0.187" (4.75 mm) pitch with multiple length, travel, ICT, lead free and rotator options, we provide a full portfolio designed for general purpose test on bare boards, loaded printed circuit boards and surface mount assemblies.

Product

Standard Type Spring Probes

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

From for bare board to for ICT, we have variety of spring probes for PCB. In addition to variety of tip type and total length, we also have receptacles that match the best to spring probes. We can also attach lead wire to the receptacles.

Product

VXI Prototyping Kits For RF Modules, Analog And Logic Circuits

-

ICS Electronics

ICS Electronics

• VXI-5501 has a Bare Copper-clad Prototyping Board for RF and microwave modules.

Product

Flying Probe Test System

A8a

-

Mycronic

A8a - Mycronic

The A8a test system provides the flexibility of flying probe testers while delivering high throughput testing for bare board printed circuit boards (PCBs). The target market for the A8a is the electrical test of tablet and PC motherboards and high density interconnect (HDI) products for smart phones. The A8a is designed for high productivity, reliability and test accuracy. To achieve high throughput the key feature of the A8a is a new dual shuttle system, which reduces the product exchange time to zero seconds in automation mode. In combination with the fast test speed of up to 140 measurements/second the A8a will give customers a competitive test solution for batches up to 5000 boards. A typical cycle time of a 4-up smart phone board is about 2 minutes.

Product

Automated Bare Board Tester with Built-In Camera

QTOUCH2404C

-

Qmax Test Technologies Pvt. Ltd.

QTOUCH2404C - Qmax Test Technologies Pvt. Ltd.

Qtouch2404C – Automated Bare Board Tester with in-built camera is designed to make automatic image capturing and probing of bare PCBs. It is designed to move on X,Y,Z directions making it possible to probe every test point. Flying Probe Tester is designed for testing high density fine pitched Single Sided / Double Sided and Multilayer PCBs for continuity and isolation using moving probes fixture –less technology.

Product

Electrical Tester

R580

-

W.M. Hague Company

R580 - W.M. Hague Company

Nidec-Read's R580 Electrical Tester provides an affordable test system for your bare board electrical test needs. You can easily integrate the R580 with your existing manual test fixtures or select from several fixture options from Nidec-Read. The R580 is supplied with opens/leakage test ability. In addition, you can include other advanced electrical test techniques.

Product

Hign Speed Bare Board Test System By Non-Contact Test Technologies

SX-750SUPERⅣ

-

OHT Inc.

SX-750SUPERⅣ - OHT Inc.

Suitable for a wide range of applications. Can be connected to a wide range of machines: from hand press to reel mechanism and in-line mechanism. We offer docking with our customers own machines. Compact main tester simplifies integration via installation inside a mechanism. If requested, we will perform a study to decide which functions should be added.