ATX
-
product
ATX Industrial Motherboards
Corvalent offers five ATX industrial motherboards. These motherboards measure 12.0” x 9.6” (305mm x 244mm).Corvalent’s line of long-life ATX industrial motherboards:-R68AX-W48AX-C24AX-Q17AX-C23AX
-
product
ATX Power Supply Tester
Dr.Power II
Thermaltake Technology Co., Ltd.
Designed from the ground-up, it supports every ATX power supply available today up to ATX12V v2.3. - Oversized LCD panel that accurately shows the value of each specific power rails (within one-tenth of a volt). - Accurate voltage indicating for +12V/+5V/+3.3V/5VSB/-12V. - Built-in output connectors diagnostic system, low-voltage, high-voltage, no voltage, PG alarm systems.
-
product
2U Rackmount Chassis For ATX/Micro ATX/Mini-ITX Motherboard
AX61223TM
*Supports ATX/Micro ATX/Mini-ITX motherboard*Supports ATX power supply*Internal one 3.5" HDD drive bays*Front-accessible one 3.5", one 5.25" HDD drive bays and one slim CD-ROM bay
-
product
CTEL 6U 8 slot with ATX, P1P4s, P2P3P5l, RoHS
104CTEL608-4046R
CompactPCI CTEL 6U 8 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
-
product
CTEL 6U 5 slot with ATX, P1P4s, P2P3P5l, RoHS
104CTEL605-4046R
CompactPCI CTEL 6U 5 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
-
product
13-slot ATX-supported PICMG Bus Passive Backplane
ATX6022/13L
*1 PICMG, 4 PCI and 8 ISA*Compatible with AX61400, AX6145, and AX6156LE*Supports both AT and ATX power supply
-
product
COM-HPC Client Type Reference Carrier Board in ATX Form Factor
COM-HPC Client Base
The COM-HPC Client Base is an ATX size COM-HPC Client Type reference carrier board based on PICMG COM-HPC Revision 1.0. Together with the COM-HPC Client Type module of your choice and off the shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification.
-
product
CTEL 6U 6 slot with ATX, P1P4s, P2P3P5l, RoHS
104CTEL606-4046R
CompactPCI CTEL 6U 6 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
-
product
CompactPCI 6U 64 bit ATX 6 slot, P1-2s, P3-5l, RoHS
102CPCI606-4157R
CompactPCI 6U 6 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
-
product
ATX Motherboard Chassis
ATX motherboard chassis features front access I/O ports and drive bays design for easy access and maintenance satisfying the need for IPC chassis. The ATX motherboard Chassis offers flexible power supply selections.
-
product
CTEL 6U 5 slot with ATX, P1P2P4s, P3P5l, RoHS
104CTEL605-4146R
CompactPCI CTEL 6U 5 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
-
product
COM Express® Type 6 R3.1 Reference Carrier Board In ATX Form Factor
Express-BASE6 R3.1
Express-BASE6 R3.1 is an ATX COM-Express Type 6 Basic / Compact size module reference carrier board based on PICMG COM-Express Revision 3.1. Together with the COM-Express Type 6 module of your choice and off the shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification.
-
product
CompactPCI 6U 64 bit ATX 8 slot, P1s, P2-5l, RoHS
102CPCI608-4057R
CompactPCI 6U 8 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
-
product
COM-HPC Server Type Reference Carrier Board in Extended ATX Form Factor
COM-HPC Server Base
The COM-HPC Server Base is an extended ATX size COM-HPC Server Type reference carrier board based on PICMG COM-HPC Revision 1.0. Together with the COM-HPC Server Type module of your choice and off the shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification.
-
product
1U Type Power Supply; ATX 300 W
PS300-1U
*Input Range: 90 ~ 264Vac Full Range8Output Voltage:**+5V, 14A**+3.3V, 12A**+12V, 25A (0.1A min)**-12V, 0.3A**+5Vsb, 3A*MTBF(hours): At 25°C, 100,000h*Safety: TUV, CSA22.2 NO.60950-1, IEC, UL, CE*Dimensions: 150 x 81.5 x 40.5 mm*Compatible with Axiomtek products: AX61120TB/AX61131TM/AX61133TM
-
product
6-slot ATX-supported PICMG Bus Passive Backplane (vertical)
ATX6022/6VP4
*1 PICMG, 4 PCI and 2 ISA*Compatible with AX61222TP/AX61220TP*Supports ATX power supply*For 2U chassis
-
product
Industrial ATX Motherboard For 12/13/14th Gen Intel® Core™ I9/i7/i5/i3 Processors
IMB-C47H
The next level of industrial performance with the ADLINK IMB-C47H Value Series motherboards. These boards redefine what's possible in cost-effective industrial computing, combining dependable performance with an accessible price point.Ideal for a variety of industrial scenarios—from embedded automation to IoT integration—the IMB-C47H series stands out with its support for the latest high-performance processors, versatile I/O capabilities, and robust expansion potential. They provide a stable and scalable platform that accommodates the growing demands of industrial environments.
-
product
LGA 1200 Intel® Xeon® W & 10th Gen. Core™ ATX Server Board with 4 x DDR4, 5 x PCIe, 2 x PCI, 6 x USB 3.2, 5 x SATA 3, Quad/Dual LANs, and IPMI
ASMB-787
- LGA 1200 Intel® Xeon® W & 10th Gen. Core™ i9/i7/i5/i3 processors with W480E chipset- DDR4 2933/2666/2400 MHz ECC/Non-ECC UDIMM up to 128 GB- One PCIe x16 link (or two x8 link), two PCIe x4, and one PCIe x1 slots- Triple displays - DVI-D, VGA, and HDMI 2.0 ports- Five SATA 3 ports and six USB 3.2 ports- One M.2 2280/2242 (SATA / PCIe compatible)- Rackmount optimized placement with positive air flow design- 0 ~ 60 °C (32 ~ 140 °F) ambient operating temperature range
-
product
CompactPCI 6U 64 bit ATX 8 slot, P1s P2l, RoHS
102CPCI608-40X0R
CompactPCI 6U 8 slot 64 bit low Easycable, system slot left, with ATX connector. It is fully compliant to the PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0.
-
product
2U Rackmount Chassis For ATX/ MicroATX Motherboard With Low-Profile Rear Bracket
RK-270MB-LH
- EIA RS-310C 19” Rackmount Standard - One 5.25'' drive bay and three 3.5'' drive bays- Supports 300W, 500W Flex ATX power supply- Support 7 low profile slots- Replaceable and easy-to-clean air filter- Front mounted fan module for easy maintenance
-
product
1U Rackmount Chassis For ATX Motherboard
AX61135TM
*Supports 12" x 9.6"standard ATX MB*Two 4 cm system fans*Supports 1U Flex ATX power supply*Internal 2 x 3.5" HDD or internal 2 x 2.5" HDD
-
product
Value Series Industrial ATX Motherboard For 10th Gen Intel® Core™ I9/i7/i5/i3 Processors
IMB-C46H
The ADLINK IMB-C46H motherboard redefines efficiency, combining robust performance with cost-effectiveness. Designed specifically for industrial environments, this motherboard is built on the reliable H420E chipset, supporting 10th Generation Intel Core processors. It offers enhanced system stability and simplified integration, making it ideal for a variety of applications from warehousing and industrial automation to smart manufacturing. With features like PCIe 4.0 for faster data transmission, DDR4 memory support for optimal cost-performance balance, and comprehensive I/O capabilities including 2.5GbE LAN for superior connectivity, the IMB-C46H is tailored to meet the diverse needs of modern industries. Dive into a new era of industrial computing with the IMB-C46H, where performance meets affordability.
-
product
Wallmount Chassis For ATX And Micro ATX Motherboards
AX60810
*Supports ATX/micro-ATX motherboard*Front-accessible one 5.25"HDD and two 3.5" HDD drive bays*Equipped with a PS/2 type power supply*One 12cm ball-bearing fan*Bidirectional mounting chassis*Easy removable filer*Flexible I/O opening on rear
-
product
ETX® Reference Carrier Board in ATX Form Factor
ETX-Proto
The ETX-Proto is an ETX Reference Carrier Board in standard ATX form factor. Together with the ETX module of your choice and off-the-shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification. The ETX concept has a great many advantages over full custom designs. It reduces engineering complexity, lowers the threshold for total project quantity and last but not least brings your product to the market in no time.
-
product
Industrial ATX Motherboard with 6th/7th Gen Intel® Core™ i7/i5/i3 and Xeon E3-1200 v5/v6 Processors
IMB-M43-C236
The IMB-M43-C236 is ADLINK's ATX industrial motherboard, supporting the 6th/7th Generation Intel Core and Xeon E3-1200 v5/v6 processor in the LGA1151 package, and the Intel C236 Express chipset, the IMB-M43-C236 supports such high-speed data transfer interfaces as PCIe3.0, USB 3.0 and SATA 6 Gb/s (SATA III), with dual-channel DDR4 2133/2400 MHz ECC or non-ECC memory up to 64 GB in four DIMM slots.
-
product
PS/2*2 Redundant Power; ATX 400W
PS401-HRP
*Input Range: 90 ~ 264Vac Full Range*Output Voltage:**+5V, 35A (5A min)**+3.3V, 28A (1A min)**+12V, 20A (2.5A min)**-12V, 1A**-5V, 0.8A**+5Vsb, 2A (0.1A min)*MTBF(hours): 100,000h*Safety: UL, TUV, CE, CSA*Dimensions: 183 x 167 x 187.8 mm*Compatible with Axiomtek products: AX61492
-
product
LGA 3647-P0 Intel® Xeon® Scalable ATX Server Board with 6 DDR4, 5 PCIe x8 or 2 PCIe x16 and 1 PCIe x8, 8 SATA3.0, 6 USB3.0, Dual 10GbE, IPMI
ASMB-815
- ATX server board with Xeon® Scalable processors- DDR4 2933MHz RDIMM up to 768GB, support Intel Optane DC Persistent Memory- Five PCIe x8 or two PCIe x16 and 1 PCIe x8- Intel® X557-AT2 dual 10GbE ports- Eight SATA3.0 and one M.2 connectors (SATA / PCIe compatible)- 0 ~ 60 °C ambient operating temperature range
-
product
CTEL 6U 4 slot with ATX, P1P2P4s, P3P5l, RoHS
104CTEL604-4146
CompactPCI CTEL 6U 4 slot with system slot left, H110 bus, ATX connector, fully compliant to the PICMG basic specification 2.0 R3.0, Hot Swap specification 2.1 R1, andv PICMG H.110 Computer Telephony specification 2.5 R1.0.
-
product
Value Series Industrial ATX Motherboard For 12/13/14th Gen Intel® Core™ I9/i7/i5/i3 Processors
IMB-C47
Elevate your industrial applications with the ADLINK IMB-C47 value series motherboards, engineered to deliver robust performance at an exceptional value. Designed with the evolving needs of cost-conscious businesses in mind, the IMB-C47 value series offers a versatile foundation for a wide range of computing tasks.From manufacturing automation to retail kiosks, these motherboards bring reliability without the premium price tag. Featuring support for the latest processors, abundant I/O connectivity, and expansion options, the IMB-C47 value series is crafted for those who seek reliable technology that aligns with their budgetary parameters.
-
product
4 Slot (DD), 2U H X 290mm D, 300 Watt ATX
39C04DDA28Y3HCCX
The Type 39C is an advanced generation of CompactPCI chassis for PICMG 2.0, 2.16, 2.17, and EXP.0 applications. IEEE 1101.10/11, 6U x 160mm CPCI cards from the front and 6U x 80mm I/O cards from the rear.
