Product

High Current Probes (Battery Contacting) HCF77212B200G300A

1165648

-

FEINMETALL GmbH

1165648 - FEINMETALL GmbH

The High Current Probes (Battery Contacting) HCF77212B200G300A are specifically designed for high-performance applications, enabling efficient and reliable electrical connections in demanding environments. With a temperature range of -45°C to +200°C, these probes are suitable for various applications that require robust performance under extreme conditions. The fundamental design features a basic contact probe structure, ensuring accurate and stable readings across a multitude of scenarios.

Product

High Bright Analyser

-

ATX Hardware GmbH

ATX Hardware GmbH

The Feasa High Bright Analyser was specially designed for testing automotive LED headlights. It is suitable for very bright LEDs and can measure them up to 800 lumen. The device is also designed for OHs with a very low numerical aperture, where the working range is a minimum luminous flux of 1 lumen per channel and a maximum luminous flux of 800 lumen. The High Bright Analyser is available in 3, 5, 10 and 20 channel configurations. The model is available for functional (FB) and in-circuit (IC) tests. The interfaces are USB, serial, daisy-chain and ICT. **SOFTWARE:** GUI (included in delivery), command line interface C, C++, DLL, supports Labview

Product

High Current Probe HCF77506B300G300

1133512

-

FEINMETALL GmbH

1133512 - FEINMETALL GmbH

The HCF77506B300G300 High Current Probe is specifically designed for power electronics applications, providing reliable performance across various operating conditions. With a robust temperature range of -45°C to +200°C, this probe is ideal for high-performance electronic systems that demand durability and precision. The HCF775 series is built to accommodate continuous currents up to 50A while maintaining a typical contact resistance of just 5mOhm, ensuring minimal signal loss and high data integrity in demanding environments.

Product

High Current Probes TS300NTC200

1033193

-

FEINMETALL GmbH

1033193 - FEINMETALL GmbH

Introducing the TS300NTC200 High Current Probes, a state-of-the-art temperature sensor designed to operate within a wide range of -45°C to +200°C. This robust model is ideal for applications requiring precise temperature measurements, providing exceptional accuracy and reliability. With a basic contact probe design, the TS300NTC200 exemplifies advanced engineering, specifically tailored to meet the demands of intricate testing environments.

Product

High Performance Raman Spectrometer

-

ZOLIX

ZOLIX

Combining volume phase holographic (VPH) grating, wavelength optimized optics and deep-cooled CCD camera, Zolix is proud to present stateof-the-art Omni-iSpecT Raman spectrograph. It solves two essential problems concerned with Raman spectroscopy, speed and sensitivity. VPH spectrograph allows you to have faster acquisition and better S/N ratio, it is ideal for low light Raman applications such as remote detection, ultra fast Raman mapping etc, its lens-based design delivers minimum distortion at focal plane and ensures best image quality, which gives you high resolution and large spectral range simultaneously, also perfect image quality is ideal for multi-channel applications without cross-talking. The Omni-iSpecT's rugged and compact design make an ideal module for in-the-field and industrial applications; It is still suitable for academic research with research-grade performance; The Omni-iSpecT also provides the SDK file for secondary development.

Product

High Speed CO2 Laser Marker

LP-RC350

-

Panasonic Industrial Devices Sales Company of America

LP-RC350 - Panasonic Industrial Devices Sales Company of America

The LP-RC350 Series CO2 Laser Markers are best suited for high-speed applications.Features:- Compact Head Featuring IP54 Rating- Controller Offering High Resistance To Noise- Smart Condition Setting Function- High Speed "On The Fly" Direct Marking- 35-Watt CO2 Laser- High Resolution

Product

High Speed Camera Systems

MEMRECAM

-

nac Image Technology Inc.

MEMRECAM - nac Image Technology Inc.

nac’s High speed camera products have an ongoing record of technical innovation and an integrated line-up that set industry standards for performance and reliability in the realm of high speed cameras. nac is the best choice for your high-speed imaging requirements.

Product

Very High Frequencies Analyzer

VHF104

-

Metravib

VHF104 - Metravib

VHF104 is an innovative Dynamic Mechanical Analyzer that applies a direct experimental method to measure the material viscoelastic properties over a very high frequency range from 100Hz up to 10kHz.

Product

Industrial Conductivity Meter (High Concentration type)

HE-480H

-

HORIBA, Ltd.

HE-480H - HORIBA, Ltd.

The HE-480H industrial conductivity meter is a high-concentration conductivity meter with a wide measurement range. It is suitable for a wide range of tasks, from managing the concentration of all types of medicinal solutions, to managing the concentration of liquid fertilizers used in hydroponic farming.

Product

Ultra High 1.77 (50.00) - 10.00 (283.00) High Performance Lead Free Probe

LFRE-25Z-10

-

ECT

LFRE-25Z-10 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 1,000,000Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

I2C High Speed Interface for USB

Tracii XL 2.0

-

telos EDV Systementwicklung GmbH

Tracii XL 2.0 - telos EDV Systementwicklung GmbH

Tracii XL 2.0 is the outstanding I2C Adapter featuring the I2C high-speed specification running the I2C bus with up to 3.33 Mbit/s. Additionally Tracii XL 2.0 can work as an I2C monitor.

Product

High Power Shunt Resistors

CS227

-

RARA Electronics Corporation

CS227 - RARA Electronics Corporation

The CS227 is a metal foil, SOT227 resistor designed to give a high current capability. The metal foil element is situated on an insulated heatsink composed of plated copper. This assembly is then mounted into a durable plastic housing and sealed with high temperature epoxy.

Product

High Accuracy Revenue Meter

JEMStar ll IEC

-

Ametek Power Instruments

JEMStar ll IEC - Ametek Power Instruments

AMETEK’s JEMStar II has the highest accuracy in the market, provides many communication options and monitors your power quality to make it the ideal choice for any metering application. An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics. The JEMStar II is easy to use and configure with our intuitive JEMWARE software and the meter display provides a user menu to show and edit configuration details. The JEMStar II has 1 GB of non-volatile memory to store your metering and power quality data for as long as you want. The meter has a single base model that can be used for simple revenue and billing applications as well as more complex power quality monitoring applications.

Product

High Energy Laser Systems

APL2100 Series

-

EKSPLA

APL2100 Series - EKSPLA

APL2100 series amplifiers are designed to produce up to 1000 mJ picosecond pulses. High pulse energy, excellent pulseto- pulse energy stability, superior beam quality makes APL2100 series picosecond amplifiers well suited for applications like OPCPA pumping, non-linear optics and others.

Product

High Voltage

-

Mess- & Prüfsysteme GmbH

Mess- & Prüfsysteme GmbH

Accurate measurement of high voltages acc. to VDE 0432 und IEC 60060 in conjunction with a high voltage divider.For the measurement, the principle of capacitive or resistive divider is used, which can be selected in the peak voltage meter.

Product

High Current Probe HCF77311B140G150

1012027

-

FEINMETALL GmbH

1012027 - FEINMETALL GmbH

The HCF77311B140G150 High Current Probe is designed for precision in power electronics applications. With a robust construction featuring beryllium copper for the plunger and gold plating for enhanced conductivity, this probe can handle continuous currents up to 30A, making it ideal for demanding electrical environments. Its operational temperature range of -45°C to +200°C ensures versatility across various settings, while the basic contact configuration allows for effective and reliable measurements in power circuitry.

Product

High Voltage DC Cable Test Systems

-

T&R Test Equipment Ltd.

T&R Test Equipment Ltd.

We can offer from ±18kVdc to ±30kVdc units which all have automatic earthing for discharging capacitive loads. They are designed to perform tests on installed cables and jointing systems.

Product

High Frequency Synthesizer

HFS Series 1.25” x 1” x 0.25”

-

EM Research, Inc.

HFS Series 1.25” x 1” x 0.25” - EM Research, Inc.

*Surface Mount Package *Broadband Designs Available *Optional Internal Reference *Optional Reference Detect Switch *Internal Reference Output Available *Off-the-Shelf Products Available

Product

High Power & Voltage Pack Testing System

FTF

-

Bitrode, Inc.

FTF - Bitrode, Inc.

Drive simulations with standard Electric Vehicle tests: FUDS, SFUDS, GSFUDS, DST and ECE-15LDrive Cycle TestingIntegration with motor test benchesCycle testing of EV/HEV Battery Packs

Product

High Power Devices

-

SemiProbe

SemiProbe

SemiProbe configures our PS4L Adaptive Architecture into the Voltarus (TM) family of probe stations to fulfill the unique requirements of testing high power devices at wafer level prior to packaging. Voltarus probe stations are available in manual, semiautomatic, and fully automatic configurations that can test and characterize power devices up to 10 KV or 200 Amps (pulsed).

Product

High Pressure Manometric Sorption Amalyzer

IMI-PSI

-

Hiden Isochema Ltd

IMI-PSI - Hiden Isochema Ltd

The IMI-PSI is designed to investigate gas sorption by nanoporous materials, from sub-ambient pressures to 200 bar. Its inherent flexibility allows both BET surface area analysis and gas storage studies to be performed using only one instrument, while an optimized design and superior build quality ensures high accuracy. Full automation enables pre-programmed gas switching and sample pretreatment routines to be set for ease-of-use.