Product

Optical Power Multimeter

TM503N

-

T&M Tools Limited Co

TM503N - T&M Tools Limited Co

TM503N Optical Power MultiMeter, a new generation of high-performance optical network test meter, with the characteristics of excellent performance and fast filed–test, has adopted the latest laser exploration and processing technology. It is a compositive optical power meter aimed at optical network maintenance, equipment research and development.

Product

Variable Optical Attenuator

KI 7010 Series

-

Kingfisher International

KI 7010 Series - Kingfisher International

The KI 7010 Series hand held Fiber Optic Variable Attenuator is a precision handheld instrument commonly used for testing optical system margin. Superior specifications, high productivity and remote control capability also make this a genuine laboratory instrument.

Product

optical liquid leak detection system

LEAKLEARN®

-

Junkosha Inc.

LEAKLEARN® - Junkosha Inc.

The LEAKLEARN OPT liquid leak detection system incorporates fluoropolymer optical fiber sensors and detectors, emitting light when fluoropolymer optical fiber sensors contact liquid. T

Product

Optical Fiber 1×16 Switch

OFSW - 1 × 16

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 16 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×16 is a 1×16 prism optical switch. It can support 1 optical fibers input and 16 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

CATV Fiber Optic Receiver

MX862R

-

Maxcom Inc.

MX862R - Maxcom Inc.

The MX862R is a Fiber Optics Receiver used to convert a fiber optic connection to RF (coax output).

Product

Optical / Electrical Clock Recovery

N1078A

-

Keysight Technologies

N1078A - Keysight Technologies

N1078A Optical/Electrical Clock Recovery provides standards-compliant clock recovery capabilities for single-mode optical as well as electrical signals from 125 MBd up to 64 GBd PAM4 and NRZ

Product

Calibrator Optics

-

Keysight Technologies

Keysight Technologies

Calibrator Optics

Product

47~1200MHz FTTH CATV Optic Receiver

H1224

-

Hangzhou Huatai Optic Tech. Co., Ltd.

H1224 - Hangzhou Huatai Optic Tech. Co., Ltd.

H1224, the operating bandwidth of 47 ~ 1200MHz, is a low power, high performance, cost-effective triple play, FTTH CATV optical receiver. Products with high sensitivity optical receiver tube and special low noise matching circuit.Receiving at high optical power can be adjusted by PAD level, played limiting output, so H1224 within a large dynamic range of the received optical power of +2 dBm ~-19dBm, have excellent characteristics.

Product

PXI Single 2 Channel Fibre Optic SC/PC

40-855-212

-

Pickering Interfaces Inc.

40-855-212 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

100GHz DWDM Optical Add/Drop Multiplexer (CATV Overlay Multiplexer)

OADM-1001-VOA (100GHz)

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OADM-1001-VOA (100GHz) - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai OADM-1001-VOA is an optical Add-Drop multiplexer with 100GHz channel interval. It is based on mature thin film filter technology, sealed with metal shell, and featured with low insertion loss, high isolation, wide channel and flexible configuration. It is the ideal device to Add(insertion Add)/Drop(Tape-out Drop) a specific wavelength(OADM) in optical fiber DWDM system. OADM-1001-VOA configures a manual-adjust optical attenuation, for adjust the equilibrium the optical power between insert channel and main signal channel, which is conveniently used for VOD overlay in CATV system.

Product

Fourier Transform Optical Spectrum Analyzer, 600 - 1700 nm

OSA202C

-

Thorlabs, Inc.

OSA202C - Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines. Many commonly available OSAs use grating-based monochromators, which have slow acquisition times due to the need to mechanically scan the grating and average out noise at each wavelength. Thorlabs' OSAs acquire the spectrum via a Fourier transform using a scanning Michelson interferometer in a push/pull configuration. This approach dramatically improves the acquisition time, enables a high-precision wavelength meter mode with 7 significant figures and ±1 part-per-million accuracy, and allows the included software to provide robust statistical analysis of the acquired spectra, as explained in the Design tab.

Product

Versatile AFM Optical Coupling

TRIOS

-

HORIBA, Ltd.

TRIOS - HORIBA, Ltd.

The TRIOS platform is an advanced research instrument that provides the entry path for researchers in materials science, biology, spectroscopy and photonics. TRIOS is the most versatile optical coupling platform providing three ports for optical spectroscopy measurements with top-down, side (oblique) and inverted accesses to the AFM tip and sample.If you work with opaque and/or transparent samples, either in air or in liquid looking at nanoscale structures and near-field optical properties investigation, the TRIOS platform is the right solution for you. It perfectly combines upright optical, inverted optical, and atomic force microscopies, and unleash all the power of both techniques providing instrument adjustment and measurement automation, high resolution and integration flexibility. Such performance is only available from HORIBA.

Product

FTTH Optical Node

SR3020

-

Hangzhou Softel Optic Co., Ltd.

SR3020 - Hangzhou Softel Optic Co., Ltd.

FTTH Optical Receiver

Product

950~2400MHz DVB-S 4 ways SAT-IF & 1 way CATV CWDM Optical Transmitter & Receiver

HDBS-5000CW

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HDBS-5000CW - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai HDBS-5000CW series combines 4 units SAT-IF optical transmitters and 1 unit CATV optical transmitter, or SAT-IF optical receivers that has CWDM standard wavelength into one housing. The built-in CWDM Multiplexing or De-multiplexing the 5-way optic, and transmit via one single fiber, which can transmit four-way SAT-IF signal of VL, VH, HL HH four polarizations and one-way CATV signal in one satellite with a high quality, flexible to install and convenient to use.

Product

Fiber Optic Cable

-

AFL

AFL

Is an assembly similar to an electrical cable but containing one or more optical fibers that are used to carry light.

Product

Optical Test Instruments

OptiSpheric® & Spherometer

-

Trioptics GmbH

OptiSpheric® & Spherometer - Trioptics GmbH

TRIOPTICS' OptiSpheric® and Spherometer are the classic optical test systems for spherical lenses that can be found in virtually any optical manufacturing process. While the Spherometer is used for the tactile determination of lens radii, OptiSpheric® systems provide contactless measurement of effective focal length, back focal length, flange focal length, MTF on axis and the radius of lenses. Specific upgrades allow determining centration errors and angles on plane surfaces. Systems for testing IOLs in compliance with EN/ISO 11979 form a class of their own. OptiSpheric® IOL R&D is preferably used for measuring single lenses while OptiSpheric® IOL PRO 2 is designed for the fully automated IOL measurement in serial production.

Product

Optical Gas Imaging Camera

EyeCGas CO

-

Opgal Optronic Industries Ltd.

EyeCGas CO - Opgal Optronic Industries Ltd.

EyeCGas CO is a handheld OGI camera for CO gas leak detection. With this camera you can safely and remotely detect and locate carbon monoxide as well as other harmful gases emissions. It is also the only OGI camera that is certified for ATEX zone 2 and UL class I Div II, hazardous environments. The EyeCGas CO allows for routine and on-demand inspections in the steel manufacturing operations and other industries where CO emissions need to be closely monitored. With EyeCGas CO, Opgal helps you detect and repair toxic gas leaks inside the facility, whether in vent stacks or pipes, allowing video and audio recording while maintaining safety. Whether these toxic gases are part of the manufacturing process, or a byproduct of the production line, EyeCGas CO helps increasing safety and protect the environment.

Product

Optical Fiber 32×1 Switch

OFSW - 32 × 1

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 32 × 1 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 32×1 is a 32×1 prism optical switch. It can support 32 optical fibers input and 1 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Optical Fiber 1×25 Switch

OFSW - 1 × 25

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 1 × 25 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW- 1×25 is a 1×25 prism optical switch. It can support 1 optical fibers input and 25 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Variable Optical Attenuators

5418

-

Fiber Optic Devices Ltd.

5418 - Fiber Optic Devices Ltd.

The FOD 5418, 5419, 5420 Variable Optical Attenuators are designed for singlemode application at 1310 and 1550 nm or multimode application at 850 and 1300 nm. They allow variable attenuation settings in range from 0 to 80 dB with resolution 0.05 dB.

Product

Optical Displacement Measurement Systems

ODS Series

-

F&K Physiktechnik GmbH

ODS Series - F&K Physiktechnik GmbH

The optical displacement measurement systems of the ODS series are specially designed for measuring the ultrasonic vibration displacement at bond tools of wire & flip-chip die bonders. The systems are highly accurate and very easy to use. That makes it the perfect tool for displacement based calibration of ultrasonic bond machines.