Product

LGM-300 Lighting Glare Measurement System

-

Hangzhou Everfine Photo-E-Info Co., LTD

Hangzhou Everfine Photo-E-Info Co., LTD

LGM-300 is for glare measurement and analysis of indoor and outdoor lighting scenes meets the measurement requirements of CIE, EN, GB standards with good measurement stability. The system is portable and can be widely used for on-site-glare measurement and analysis such as indoor lighting, road lighting, sports venues and regional lighting.

Product

Arc/LED Lighting Testers

-

Vidac Solutions

Vidac Solutions

This system is a modern replacement for an obsolete product tester. This tester Hipots the lamp under test, checks for proper operation at the required voltage and also detects short circuit operation and the 5KV ignitor pulse signal. This tester allows for quick calibration to permit traceable/repeatable results and store the test results for product tracking.

Product

3.4 MP Autofocus Low Light USB Camera Board With Liquid Lens

See3CAM_30

-

e-con Systems Inc.

See3CAM_30 - e-con Systems Inc.

See3CAM_30 is a 3.4MP UVC Compliant, low light, autofocus USB camera with liquid lens. It is a two-board solution with AR0330 CMOS image sensor from ON Semiconductor and USB 3.1 Gen1 type C interface board. See3CAM_30 is a colour camera with S-mount lens holder and does not require any special camera drivers to be installed in the host PC. See3CAM_30 is customizable and it is a Ready-to-Manufacture camera with all the necessary firmware built in and compatible with the USB Video Class (UVC). It consumes less power and doesn't heat up. There is no mechanical movement like in VCM motor for autofocus. Hence the life of the lens increases.

Product

Light Meters

-

Beha-Amprobe

Beha-Amprobe

An instrument for measuring the intensity of light, used chiefly to show the correct exposure when taking a photograph.

Product

Cable Continuity Test Fixture

CCT

-

Test Electronics

CCT - Test Electronics

6 and 8 Wire Cable Continuity Test Fixtures For convienient desk top and bench top The most important features of this cable continuity tester is its ease of use intuitive control functions and durability in a production environment.

Product

Light / Lux Meter, Calibrated w/Data, 50000 lx, 100 lx, 4 %, 185 mm, 78 mm, 38 mm

72-7250 CAL D

-

Tenma

72-7250 CAL D - Tenma

The 72-7250 CAL D from Tenma is a digital light meter with RS232 capability. It has custom one-chip microprocessor LSI circuit which ensures high accuracy. The meter features 13mm (0.5”) super large LCD display with contrast adjustment for best viewing angle, data hold and auto power off. It records maximum, minimum and average readings with RECALL facility. The 72-7250 has RS-232 PC serial interface, user selectable lighting type (tungsten, fluorescent, sodium or mercury, daylight) and zero adjustment by push button. The meter operates from 9V battery.

Product

Test Fixtures

-

Global Test Services LP

Global Test Services LP

At Global Test Services LP, we know that verifiable yields are the backbone of your business, which is why we offer innovative, robust solutions that offer you better availability, improve efficiency, and offer flexible, scalable systems that meet the specific quality and test needs of your business.

Product

Digital Light Meter

KG-75

-

Kaise Corporation

KG-75 - Kaise Corporation

Backlight LCD helps easy reading in dark place.Full-Auto Ranging.MAX/MIN measurement.Display Hold.Auto Power Off.Two measurement units : Lux and Fc

Product

Light / Lux Meter, 40000 lx, 0.1 lx, 157 mm, 54 mm, 34 mm

72-9195

-

Tenma

72-9195 - Tenma

Handheld light meter provides a live reading of luminance in most environments. Convenient size easily slips in your pocket or tool kit.

Product

Stand-Alone Test Fixture

MA 2012/D/H/VPC-G12x-18

-

INGUN Prüfmittelbau GmbH

MA 2012/D/H/VPC-G12x-18 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 17,50 kg

Product

Absolute Length Gauges For Measuring Stations And Multi-gauging Fixtures

ACANTO series

-

Heidenhain Corp.

ACANTO series - Heidenhain Corp.

*High system accuracy: ±2 µm / ±1 µm*Serial data transmission*Interface: EnDat 2.2*Protection rating of up to IP67*Compact design for limited installation space*Various plunger actuation possibilities

Product

See3CAM_CU27 - Sony® Starvis™ IMX462 Ultra Low Light USB 3.1 Gen 1 Camera

-

e-con Systems Inc.

e-con Systems Inc.

Your product description goes here.

Product

GLORIA-X150A/ Xenon Light Source

-

ZOLIX

ZOLIX

Xe arc lamp light sources are the preferred artificial sources to simulate sunlight. The high color temperature (6000K) of the Xenon lamps is a close match to the solar temperature. This results in very similar solar spectra in the UV and VIS although the source has some Xe emissions lines in the near IR. Application for fluorescence, luminescence and phosphorescence, absorbance and reflectance, photochemistry, photolithography, solar simulation and so on.ct description goes here.

Product

ICT Test Fixture

-

Kyoritsu Testsystem Co., Ltd.

Kyoritsu Testsystem Co., Ltd.

It can be produced in our overseas branches which are Thailand ,China and India.High precision test fixture can be produced.Test fixture for other brand testers can be produced.

Product

High Power White Light LED Light Sources

LS-HP1

-

lightsource.tech GmbH

LS-HP1 - lightsource.tech GmbH

The LS-HP1 is a series of high-power, high brightness light sources for liquid light guides (LLG). It is characterized by its outstanding luminance and thus delivers very high light output from liquid light guides.The LS-HP1 works with the latest generation of high-power LEDs with up to 100W power from an area of less than 15mm² and is significantly brighter than a conventional halogen light bulb with 150W. The LS-HP1 is available for liquid light guides with core diameters of 3 or 5mm.

Product

Load Pull Test Fixtures

-

Maury Microwave Corporation

Maury Microwave Corporation

Low Insertion Loss for High VSWR TuningMultiple Connector Configurations50Ω and Transformers (Klopfenstein, Quarter-wave) AvailableHeatsinks and Fans AvailableCooling (Water cooling, Forced air cooling) AvailableIntegrated Biasing Available

Product

VOC FIXTURE OVER CLAMP ASSEMBLY'S

-

Test-X Fixture Products

Test-X Fixture Products

Test-X VOC Series overclamps are used for testing bare or loaded printed circuit boards with open vias and to minimize board flex.The VOC Series overclamp comes with adjustable delrin pressure fingers, anti-rotating hex nuts, hinge and latching assemblies, mounting instructions and hardware.The VOC Series will accomodate fixtures with dress frames or newer style fixtures using full-size top plates.

Product

Excitation Light Source

-

Bunkoukeiki Co., Ltd

Bunkoukeiki Co., Ltd

Various spectral irradiation is possible by combining various light sources + spectroscope + irradiation system.We will also respond to special order correspondence. We will provide light suitable for your desired intensity such as light intensity and wavelength.

Product

Underwater LED Lights, 120Vac, 4,200 or 7,300 Lumen Output

LED-R-Series

-

Teledyne Marine Bowtech

LED-R-Series - Teledyne Marine Bowtech

The Teledyne Bowtech LED-R-Series underwater LED lights are 120Vac and available with 4,200 or 7,300 lumen output. These lights feature our latest LED technology and are now a real alternative to AC incandescent lamps.Due to Teledyne Bowtech's continued history of innovation, these lights feature the latest and best underwater LED lighting technology available.

Product

Fiber Optic Light Sources

-

Fiberinthebox

Fiberinthebox

Fiber optic light sources are a necessity for performing optical fiber network testing to measure the optical fiberal loss for both single mode fiber cable and multimode fiber cables. They are designed to cover a variety of wavelength ranges to suit all optical testing needs and usually the optical light sources are used with the optical fiber power meter to test the fiber system loss. Light sources are offered in a variety of types including LED, halogen and laser. Usually the optical light source is used with the optical fiber power meters, they act as an economic and efficient solution for the optical fiber network works.

Product

Upright Light Microscopes

-

Leica Microsystems

Leica Microsystems

Get the publication-quality imaging and customizable upright microscope solution you need for your Life Science research with Leica Microsystems. These powerful imaging systems feature constant color, natural light illumination, superior optics, and configurable options to provide high contrast, brilliant images for your cutting-edge biological research.