Corrosion Test
See Also: Corrosion
-
Product
Corrosion Test Chamber
CME SF-CCT
-
CME SF-CCT chambers are designed to be flexible enough to comply with as many different CCT specifications as possible. These may be programmed to conduct a whole range of corrosion tests such as wet cycle, dry cycle, controlled humidity as well as the salt spray test in a single chamber. This can occur in any sequence and be repeated automatically. A wide range of optional accessories enable additional climates to be added to further extend the number of climates and conditions that can be created.
-
Product
Salt Spray Corrosion Test Chamber
-
Xi'an LIB Environmental Simulation Industry
Used to simulate harsh, corrosive environments by exposing materials to salt fog.
-
Product
Automated Corrosion Test Chamber
-
Thermotron's Automated Corrosion Test chambers combine the capabilities of a temperature-humidity test chamber and a salt-spray cabinet. Corrosion chambers eliminate the need to manually transfer products from one environment to another.
-
Product
Corrosion Test Chambers
-
Shanghai Morningtest Environmental Chambers Co.,Ltd.
Corrosion test chambers for salt spray testing is used throughout the automotive, aerospace, fasteners, electronics, paints and coating industries!
-
Product
Cyclic Corrosion Test Chambers
CCT
-
Cyclic Corrosion Test Chambers are used throughout the automotive, aerospace, fasteners, electronics, paints and coating industries.
-
Product
Mixed Gas Corrosion Test Chamber
-
Guangdong Test EQ Equipment co., Ltd.
- Precision Gas Dosing: Delivers exact concentrations of corrosive gases (e.g., H₂S, SO₂, Cl₂ with N₂ carrier gas; NO₂ with synthetic air) for repeatable test conditions. Supports simultaneous dosing of up to four gases, enabling multi-pollutant interaction studies.- Acrylic (PMMA) viewing window allows real-time monitoring of specimens without compromising test integrity.- Pressure monitoring system and gas sampling port ensure operator safety and compliance with industrial hygiene standards.- Advanced Environmental Control: Integrated air exchange module maintains consistent gas distribution and replicates dynamic atmospheric conditions.- Standard Compliance: Certified for IEC 60068-2-60, 60068-2-42/43, ISO 21207, and other global protocols, guaranteeing internationally recognized results.
-
Product
Corrosion Test
-
The purpose of this test is to determine the resistance of materials and protective coatings to corrosive atmospheres when a more corrosive environment than the salt fog/spray test is required. The test is used when material is stored or operated in areas, for example, where acidic atmospheres exist, such as in industrial areas or near the exhausts of any fuel-burning device. Gases such as sulfur dioxide are used to replicate the exhausts of fuel burning devices.
-
Product
Composite Salt Spray Test Chamber
YWX/Q-010X
-
Composite Salt Spray Test Chamber stimulate the actual natural conditions to do accelerated corrosion test, all the testing are based on common states on the natural environmental: such as combine with salt spray, hot air drying, humidity, low temperature and so on. The test samples are widely used on the intense changes in the environment, like automobile parts, aviation equipment, building materials, coating, electric and electrical machinery so on. YWX/Q-150X series is full compliance with ASTM D4728I, EC 60068-2-1, IEC 60068-2-14 and EIA/JEDEC JESD22-110-B standard requirements etc.
-
Product
Graphite Disc Electrodes
OT1
-
High-purity graphite disc electrodes available in diameters from 2 mm to 10 mm for electrochemical measurements, corrosion testing, and electrocatalysis research.
-
Product
Salt Spray Corrosion Test Chamber
CX-Y60L
-
Shenzhen Chuangxin Instruments Co., Ltd.
Laboratory Salt Spray Corrosion Test Chamber for Nss / Acss / Cass Test is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.
-
Product
Chemical Analysis and Corrosion Testing
-
Performing chemical analysis of metal alloys including both ferrous and non-ferrous alloys.Chemical analysis involves determining the chemical constituents of metals and related materials.An industry leader and co-operating laboratory for qualifying Calibration Standards for Chemical Analysis.Our chemical laboratory processes include Spectroscopy – Optical Emission Inductively Coupled Plasma, gas analysers, wet chemical, Intercrystalline/ Intergranular Corrosion (including G28, G48 etc).
-
Product
Corrosion Testing
-
Corrosion testing helps you estimate component service life, compare candidate materials in your service environment, and help screen your materials and their condition.
-
Product
Concrete Corrosion Testing
-
This category comprises the range of instruments that evaluate parameters related to the corrosion of the concrete or the steel reinforcing bar within the concrete.
-
Product
Quartz Electrolytic Cell Series | 30ml–300ml Square Fused Cells
QSE1
-
QSE1 Quartz Electrolytic Cell Series for electrochemical experiments, spectroelectrochemistry, corrosion testing, and high-temperature laboratory applications. Available in round and square fused quartz configurations from 30ml to 300ml and 50×50×50mm to 80×80×80mm sizes, including sealed, gas-welded, integrated, and bench stand versions. High-purity fused quartz provides excellent chemical resistance, high-temperature stability, and optical transparency for advanced electrochemical research systems.
-
Product
Cells and Electrodes
-
Electrochemical cells are designed to their special purpose. The method, the matter and their reactions as well as the environmental conditions define the limitations and demands for electrochemical cells and the electrodes. Standard corrosion testing cells may have a large volume, since corrosion products shall not change the solution grossly during the test. On the other hand, it may be valuable to collect corrosion products - then a very small volume is desired ("eluation cell"). Special corrosion tests for pitting reqiure a setup where undesired crevice corrosion is excluded ("Avesta cell" , "Quarfort Cell" or "Flushed port cell". Or you want to investigate in crevice corrosion, then the cell design should meet such conditions. Have a look to the variety of cells shown here, and call us if you have a special task where a fresh design is required.
-
Product
Platinum Sheet / Platinum Anode-Cathode Electrode
PSP1
-
PSP1 Platinum Sheet / Platinum Anode-Cathode Electrode is a research-grade electrochemical electrode for use as a working electrode, counter electrode or custom laboratory assembly. It is suitable for voltammetry, electrocatalysis, corrosion testing, sensor research and electrochemical cell development.
-
Product
Corrosion Cabinets
-
Atlas Material Testing Solutions
For over 40 years, Atlas has offered one of the broadest and most comprehensive corrosion testing product lines in the industry, supported by global local technical service. Our corrosion cabinets meet most international, OEM and related test standards when equipped with the appropriate options and accessories.
-
Product
Salt Bridges, Luggin Capillaries & Gas Bubblers For Electrochemical Cells
RES1
-
Glass salt bridges and Luggin capillaries for electrochemical cells, designed to minimize IR drop and improve reference electrode accuracy in laboratory experiments. Suitable for voltammetry, electrocatalysis, corrosion testing, sensor research and electrochemical cell development.
-
Product
Pure Platinum Mesh Electrode With Platinum Wire Frame
PPM1
-
Pure platinum mesh electrode manufactured with a 0.5 mm platinum wire frame and 0.12 mm platinum mesh for electrochemical research, electrocatalysis, water electrolysis, corrosion testing, and battery applications. Available in standard and custom sizes with excellent electrical conductivity, chemical stability, and corrosion resistance for laboratory and OEM projects.
-
Product
Porous Titanium Foam | Titanium Foam Metal
PTF-1
-
PTF-1 Porous Titanium Foam | Titanium Foam Metal is a research-grade electrochemical electrode or conductive component for use as a working electrode, counter electrode or custom laboratory assembly depending on the experiment. It is suitable for voltammetry, electrocatalysis, corrosion testing, sensor research and electrochemical cell development.
-
Product
Unsealed Electrolytic Cell | 10–1000 ML Configurations
SE1
-
SE1 Unsealed Electrolytic Cell for electrocatalysis, corrosion testing, and battery research, available in 10–1000 mL capacities for three-electrode systems.
-
Product
Salt Spray Testing/Cabinet Based Corrosion Testing
-
Sometimes referred to salt mist, salt fog, humidity or corrosion testingAll corrosion and environmental related tests can be tailored to customer requirementsTypical exposure times range from 16 hours to over 1000 hoursAccelerated corrosion testing can be used to check protective coatings, surface finishes and material compatibilitiesOur facilities provide a continuous controlled corrosive exposure and can combine salt spray and humidity environments.
-
Product
Graphite Sheet Electrodes
OT1-2
-
High-purity graphite sheet electrodes for electrochemical research, current collectors, electrocatalysis and corrosion testing. Custom sheet dimensions, exposed areas, mounting holes and lead-connection options are available for laboratory cell designs.
-
Product
Salt Spray and Fog chamber
P700
-
Bemco's Standard P700 Salt Spray and Fog chamber is designed to fill the needs of laboratories that require accurately controlled salt spray and fog tests on small components and assemblies. This unit meets all standard military, commercial, and ASTM salt fog corrosion and humidity corrosion tests.
-
Product
DIN Scratching Tool
1538
-
The Elcometer 1538 DIN Scratching Tool has interchangeable carbide cutters for the preparation of specimens to be used for corrosion testing.
-
Product
Corrosion Testing
-
The salt spray test is a standardized test method used to check corrosion resistance of coated samples. Coatings provide corrosion resistance to metallic parts. Since coatings can provide a high corrosion resistance through the intended life of the part in use, it is necessary to check corrosion resistance by other means. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish.
-
Product
Quartz Cell Stand With Electrode Holder
QET-1
-
Quartz electrochemical cell stand with PTFE base and adjustable electrode holder for three-electrode systems. Available with borosilicate glass or quartz cells in multiple volumes. Suitable for electrocatalysis, electrolysis, corrosion testing, and general electrochemical research.
-
Product
Carbon Steel & Stainless Steel Electrodes
CTE-1
-
CTE-1 Carbon Steel & Stainless Steel Electrodes is a research-grade electrochemical electrode or conductive component for use as a working electrode, counter electrode or custom laboratory assembly depending on the experiment. It is suitable for voltammetry, electrocatalysis, corrosion testing, sensor research and electrochemical cell development.
-
Product
Pure Titanium Plate & Mesh Electrodes
TPR-1-1
-
Pure titanium plate and mesh electrodes for electrolysis, corrosion testing, electroplating, and electrochemical research. Available in 10 × 10 mm, 20 × 20 mm, 30 × 30 mm, and 40 × 40 mm formats, with both plate and mesh structures. Custom sizes, thicknesses, and mounting configurations are available upon request.
-
Product
ISO Scratching Tool
1537
-
The Elcometer 1537 ISO Scratching Tool is a simple but effective instrument that is used to scratch the surface of samples in preparation for adhesion, salt spray and corrosion tests.
