-
Product
Gyro Test Panel
TA-256
-
Designed to test the KI256 / KI258 panel mounted Flight Director gyros. The panel contains a power supply, the special manufacturers recommended rate board required by SA-103 to properly verify outputs As well as all other electronics required to support by the book testing.
-
Product
6,000 Counts Dual Display Digital Multimeter With VFD Feature
KM-711
-
Kusam Electrical Industries Limited
• VFD-V & VFD-Hz in Dual Display• 5msCREST-MAX capture mode (Peak Hold)• Autoranging Relative -Zero mode• Display Hold• EF-Detection (NCV)• Beep-Jack input warning• Hz Line Level Frequency• Hz Logic Level Frequency• Diode Test• Continuity Test
-
Product
HDG and OBS Track Select Panel
TA-260
-
Universal Heading and Track Selector Panel This panel provides a synchro transmitter for Heading and a synchro resolver for Nav converter alignment. The synchros are mounted on industry standard 18:1 dual speed drives for maximum accuracy and repeatability. This unit can be used to calibrate both manual and automatic converters. This panel provides a rear mounted interface connector as well as front mounted tip jacks for independent breakout if so desired. The TA-260 also provides two discrete switches associated with the resolver configuration. The 30Hz/400Hz switch is provided to allow the resolver to be properly compensated for the type of Nav converter to be aligned. The second switch allows you to open or short the resolver rotor lead as may be required by some newer GPS equipment. This panel is lightweight enough for portable use or may be rack mounted.
-
Product
Dual Display Auto-Ranging LCR Meter
LCR 459
-
Kusam Electrical Industries Limited
• Dual Displays provide quick tested results readouts, with L.C.R. display values up to 19999 counts and Q.D.R. display values up to 9999 counts • Test 4 parameters : Ls+(Q,D,Rs), Lp+(Q,D,Rp), • Cs+(Q,D,Rs), Cp+(Q,D,Rp) • RS-232 PC Interface • External DC Adapter functions • Set Hi / Lo limits using absolute values or percentage limits.
-
Product
8.75 (222.25) 24" Solid Panel
P-0824
-
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
Product
28.00 (711.20) 24" Perforated Panel
P-2824P
-
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
Product
Dual Display HVAC Clamp Meter w/ Temperature
DL389B
-
UEi Test & Measurement Instruments
• Dual Display• Input jack locks• Worklight• Backlit display• Auto/manual ranging• Min/Max• Test lead storage• Magnetic mount• User temperature calibration• Auto power off• Degree ºF or ºC• Low battery indicator• Test lead holder on clamp• 2-Year limited warranty
-
Product
Flatness, Bow, Warp, Curvature, Glass Thickness + Optics Test Equipment
Mobile Wedge Angle Sensor WAS 160
-
Optik Elektronik Gerätetechnik GmbH
Portable sensor for measurement of radius and wedge angle. Application: windshields of cars, helicopters, airplanes.
-
Product
F Series Panel Meter
ST-90U
-
Standard Electric Works Co., Ltd
● Hz Meter : Measuring Ranges : 45~56 Hz, 45~55 Hz, 55~65 Hz Rated Voltage : 110V, 220V Accuracy : Class 2.0 Consumption : Max. 15mA Test Voltage : 2kV. 50-60 Hz● Case and Composition: Polycarbonate front and Polybutylene Terephthalate(PBT). Three studs mounting.● Accuracy : AC class 2.5 DC class 2.0 Rectifier class 2.0● Color：Black case and white scale plate.● Pointer：Sword type color in black.
-
Product
Soft Front Panel for NI RF Generators
NI RFSG Soft Front Panel
-
The NI RFSG Soft Front Panel helps you quickly generate RF continuous wave (CW) or modulated signals. It works with the NI PXIe-5644R/5645R/5646R vector signal transceivers (VSTs) and NI 567x vector signal generators (VSGs). You can open multiple instances for multiple instruments in a system. In addition, you can load I/Q waveforms, save and recall setups, preview data that is loaded onto the VSG, and sweep levels or frequencies using RF list mode. The soft front panel also features built-in modulation schemes such as AM, FM, and PM.
-
Product
1/8 DIN Bargraph Process Display
BAR Series
-
30-segment bar graph meter with 75 mm (3") scale length for 4-20 mA, 0-1 mA, 0-10V, or 1-5 V signals. Optional dual-relay output.
-
Product
Microprocessor Panel Indicator and Regulator
HD9022
-
Microprocessor panel indicator and regulator with progrmmable and configurable thresholds.
-
Product
Signaling and Display Systems
-
*Display of analog process values*Display and monitoring of process values*Display and monitoring of pulse-shaped signals
-
Product
KMD540 Series and RDR2000/2100 Panel
TA-3C
-
The TA-3C test fixture is a combination of the KMD540 testing requirements and the RDR-2000/2100 weather radar interface requirements. This panel allows the technician to test the KMD540 MFD as a stand alone item (with external simulators) or together with a radar sensor for a dynamic real time test. The panel includes the required switching for sensor alignment and KMD testing along with input jacks for the required data inputs. Also built into the fixture is an analog gyro simulator for checking the stabilization functions of the sensor. The full enclosure comes in standard panel width.
-
Product
5.25 (133.35) 19" Perforated Panel
P-0519P
-
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
Product
Receiver Kit, G6 Receivers X 2 , Mounted on Slide Mount Panel (slide kit required)
310104419
Receiver
This receiver kit contains (2) G6 Receivers mounted on a special slide mounting panel for easy access to wiring and instrumentation. Each G6 is configured for 6 modules. Panel requires a slide kit for proper rack mounting which is not included and must be purchased separately. *Please note: Consult procedure sheet/user manual for information regarding slight slide mechanism bracket protrusion downward into next U height on test rack on both sides of receiver.
-
Product
Panel Mounted Power Quality and Energy Monitor.
PM7503
-
The PM7503 Power Quality and Energy Monitor is a panel mounted variant of our top of the range PM7000 Power Quality Analyser. As with the PM7000 and P7000FLM, as well as recording all other important power quality parameters, the PM7503 with the optional Interharmonics upgrade is able to record 100 Voltage or Current harmonics on all 4 inputs at the same time.
-
Product
Instrument Systems Display Measurement
-
Konica Minolta Sensing Americas, Inc
Instrument Systems brings you a selection of exciting turnkey systems for use in evaluating display characteristics. It allows for the easy measurement of different spot sizes due to the variety of interchangeable lenses. Instrument Systems display measurement products are extremely responsive and produce highly precise results.
-
Product
6-48V Nixie Digital Display Circuit Tester
1674B
-
Peaceful Thriving Enterprise Co Ltd
Check on 6, 12, 24 and 48V systems.
-
Product
Panel Mounting Conductivity Transmitter
DO9786T-R1
-
output of a conductivity electrode with temperature compensation into a 4÷20 mA signal.
-
Product
Industrial Panel Mount Monitors, PCs, and HMIs
-
Explosion- Proof HMIs Corvalent Panel Mount all-in-one system HMIs are water, dust, and explosion-proof. Our Explosion-Proof Industrial HMIs are compliant with IP66, NEMA 4X, and C1D2 standards and are the best solution for environments prone to explosion. -Visio Z15R-XP Explosion-Proof -Visio Z19R-XP Explosion-Proof -Visio Z21.5R-XP Explosion-ProofAll-In-One Industrial HMI Displays Corvalent’s full line of Industrial HMIs is rated IP65 to IP69K, as well as ATEX Marine. These all-in-one HMI systems are available in a wide variety of display sizes, ranging from 7“ to 21.5“.Industrial Panel Monitors Corvalent’s Industrial Panel Monitors are built with the highest quality materials. They are rated ATEX Marine, as well as IP65 to IP69K. Industrial Panel Monitors are available in display sizes ranging from 7” to 21.5”.Industrial Panel PCs Corvalent’s Industrial Panel PCs are built with longevity in mind. They can withstand the stresses an industrial environment places on technology rated IP65 to IP69K and ATEX Marine. -Visio PPC-17RES -Visio PPC-19RES -Visio PPC-21RES -Visio PPC-24PCT
-
Product
Digital Panel Meter
-
We manufacture different LED Panel Meter such as DE-3150 LED Panel Meter (DC 3V~30VDC 0V~100VAC 50V~300V), DE-3672E LED Panel Meter, DE-367SE LED Panel Meter and DE-S944A LED Panel Meter..
-
Product
Panel Mount With Fan Out For Connecting To A Printed Circuit Board
-
Panel Mount With Fan Out For Connecting To A Printed Circuit Board
-
Product
26.25 (666.75)19" Perforated Panel
P-2619P
-
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
Product
Panel Mount Calibrators
-
Practical Instrument Electronics, Inc.
Now you can panel mount PIE 820 & 830 Multifunction calibrators. As part of a calibration bench, the PIE 820PM or 830PM provide an accurate multifunction calibrator that is easy to use and may be removed for annual calibration. Panel mounting a multifunction calibrator is useful whether you are putting a calibration bench in your instrument shop, require a manual loading station in a control panel or for use as a built-in process simulator.
-
Product
12.1" Fanless Panel PC With Intel® Atom™ E3940 Processor
PPC-3120
-
12.1" XGA TFT LCD with resistive touchscreenIntel® Atom™ E3940, 1.6 GHz, processorUp to 8 GB DDR3L 1866 SDRAMSupports 1 x internal 2.5" SATA HDD and 1 x mSATAFanless design with low power consumptionWide range DC support (9 ~ 32 VDC)1 x isolated RS-422/485 with automatic flow control and dual Intel GbEOptional GPIO (8 channels, TTL level) & PCI/PCIe x1 expansion kitNo RED Certification
-
Product
RS232/422 Strobe Mux III Card & Panel
9565-16
-
16 serial port ISA compatible card connected by 4.8 ft (1.5m) cable and terminated as male DB25 connectors on external panel 7.6" high x 13" wide x 1" deep (193 x 330 x 25 mm).
-
Product
12.1" SVGA And XGA Industrial Display Kit
IDK-1112
-
12.1" LCD supports 1024 x 768 resolution, 5-wire resistive / projected capacitive touch solution. LVDS signal interface, LED driver board built in, Touch controller included (USB).
-
-
Product
Spectrally Flat Class A Albedometer
LPPYRA11
-
Albedometers are composed of two pyranometers that are mounted back-to-back. An albedometer measures in two directions; one pyranometer is facing upwards (measuring the global solar radiation), the other pyranometer is facing downwards (measuring the reflected solar radiation).
