Product

Precision Optics and Assemblies

-

Keysight Technologies

Keysight Technologies

For more than 35 years, Keysight has been designing and fabricating leading-edge optics for use in our laser interferometer systems. You can take advantage of this engineering, component fabrication, and assembly expertise and our state-of-the-art optics manufacturing facility in Santa Clara, California to deliver cutting-edge optical solutions to your customers:

Product

High Power Fiber Optic Visual Fault Locator

VFL-700

-

Shanghai Fibretool Technology Co.,Ltd.

VFL-700 - Shanghai Fibretool Technology Co.,Ltd.

The VFL-700 is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation.

Product

High-Power InGaAs Optical Head

81626C

-

Keysight Technologies

81626C - Keysight Technologies

The new 81626C high-power optical head provides a 5 mm detector area and allows flexible placement of the remote optical power meter, which is then connected to the N7749C. The 81626C accepts parallel beams with up to 4 mm diameter, standard SM fiber and MM fiber with max. 100 μm core diameter, NA ≤ 0.3. A wide choice of adapters allows input from popular fiber connector types, bare fibers or open beams. The magnetic D-shaped adapters allow rapid removal and replacement without twisting attached fibers.

Product

PXI Dual 2 Channel Fibre Optic SC/PC

40-855-222

-

Pickering Interfaces Inc.

40-855-222 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

Fiber Optic Displacement Sensors

-

OpSens Solutions Inc.

OpSens Solutions Inc.

Designed to deliver long term accuracy and reliability.

Product

Optical Fiber Identifier

X5004

-

Shinho Optics Limited

X5004 - Shinho Optics Limited

Lower power indicationEasy-to-replace adaptersEasy-to-use with "ONE KEY" operationDisplays the relative core powerDurable metal housing and quality constructionEfficiently identifies the fiber transmission direction and frequency tone (270Hz, 1 KHz, 2 KHz) with audible warning

Product

Microscope Photoluminescence Spectrometer

Flex One

-

ZOLIX

Flex One - ZOLIX

Photoluminescence (PL) is the light emission from a material under the excitation by ultraviolet, visible or near infrared radiation. In semiconductor luminescent property measurements, the sample (e.g. GaN, ZnO, GaAs etc.) was usually excited by a laser (with a wavelength of 325 nm, 532 nm, 785 nm etc.), and its PL spectrum is measured to analyze the optical physical properties, such as the band gap width etc.. Photoluminescence is a high sensitivity, non-destructive analysis method, which can provide the information about the structure, composition and surrounding atomic arrangement of materials. Therefore, it is widely used in physics, materials science, chemistry and molecular biology and other related fields.

Product

FOV Micro Measuring Microscope 4.0

-

Opto GmbH

Opto GmbH

The new ultra-compact digital micro measuring microscope from Opto is the perfect tool for on-site measurements in production.

Product

Radar-Input & Scan Conversion Solution

Cougar2

-

Curtiss-Wright Defense Solutions

Cougar2 - Curtiss-Wright Defense Solutions

Cougar2 is an open-standards based high performance solution for capturing, converting and mixing radar video. Designed for demanding military radar applications, Cougar2 speeds and simplifies the integration of advanced radar image processing and distribution functionality into deployed embedded systems.

Product

Atomic Force Microscope for SEM/FIB

AFSEM® AFM Insert

-

Quantum Design Inc.

AFSEM® AFM Insert - Quantum Design Inc.

AFSEM is an atomic force microscope (AFM), designed for integration in a SEM or Dualbeam (SEM/FIB) microscope. Its open access design allows you to simultaneously operate SEM and AFM inside the SEM vacuum chamber. The correlated image data of AFM and SEM enable unique characterization of your sample, and the combination of complementary techniques is a key success factor for gaining new insights into the micro and nano worlds. AFSEM enables you to easily combine two of the most powerful analysis techniques to greatly extend your correlative microscopy and analysis possibilities.

Product

VOD Overlay 1550nm Direct Modulated Optical Transmitter

VOD1504

-

Hangzhou Huatai Optic Tech. Co., Ltd.

VOD1504 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai VOD1504 is a high performance 1550nm direct modulated inter-cut (narrow-bandwidth multiplex) optical transmitter which design and manufacture specially for realizing two-way television interact operation (VOD) for CATV network, mainly used in second service area to inter-cut IP/QAM or local program. In the content distribute network system (CON), VOD1504 is the VOD flow rate loading equipment, also often called the edge IP/QAM optical transmitter.

Product

Optical VSF Sensors

-

Sequoia Scientific, Inc.

Sequoia Scientific, Inc.

The optical Volume Scattering Function(VSF) is an ‘inherent optical property’ of water that is used by optical oceanographers to predict light propagation, image degradation, remote sensed ocean color, biological environment etc. in water.

Product

Telecom Production Optical Spectrum Analyzer 1200 - 1650 nm and 700 - 1700 nm

AQ6360

-

Yokogawa Test&Measurement

AQ6360 - Yokogawa Test&Measurement

The AQ6360 is the fastest optical spectrum analyzer for optical device manufacturing offered by Yokogawa. It is a cost-effective optical spectrum analyzer ideal for industrial manufacturing of telecom devices such as lasers, optical transceivers and optical amplifiers. The AQ6360 features a wavelength range of 1200 to 1650 nm for ideal manufacturing test performance.

Product

Optical PON Power Meter

STC-PON106

-

Shanghai Stone Communication tech Co., Ltd

STC-PON106 - Shanghai Stone Communication tech Co., Ltd

STC-PON106 target at the FTTx application and maintenance. This PON power meter is able to simultaneously test and estimate the signals of the voice, data and video. It is an essential and ideal tool for the construction and maintenance of the PON projects.

Product

Stereo Microscopes

-

Accu-Scope Inc.

Accu-Scope Inc.

Sometimes called dissecting microscopes, stereo microscopes provide comfortable 3-dimensional viewing of a sample in which each optical path (eye) sees the sample from a slightly different angle. Stereo microscopes are used to observe and manipulate samples in disciplines such as research, assembly and manufacturing, gemology and jewelry making, sample preparation and, of course, dissection. ACCU-SCOPE stereo microscopes can be found across a wide range of industries and institutions including biology labs, universities, research institutions, government facilities, biopharmaceuticals, manufacturing facilities, and more. Stereo microscopes are also available on a variety of stands and with a variety of illumination sources, offering features that may be particularly suited for your application.

Product

RFoG Bi-Direction FTTB Optical Receiver AGC, Optional SNMP

RFoG4001

-

Hangzhou Huatai Optic Tech. Co., Ltd.

RFoG4001 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai RFoG4001, is a type of high-grade RFoG Bi-direction FTTB Optical Receiver, AGC, Optional SNMP. Various operating parameters of machine are microprocessor-control, ATT. Optional network transponder, implement remote network management.

Product

Mini Two Output Extra-low Receiving Uni-directional Optical Receiver

9082 (Out-door)

-

Hangzhou Huatai Optic Tech. Co., Ltd.

9082 (Out-door) - Hangzhou Huatai Optic Tech. Co., Ltd.

9082 is an economic extra-low receiving uni-directional receiver. It is commonly used in "fiber to building" and some remote houses in the village . It is out-door type and its power supply is 220V or 60V.

Product

Standard Optical Interleaver

-

Optoplex Corporation

Optoplex Corporation

An innovative technique for expanding the number of channels per fiber involves an optical device, called an optical interleaver. For example, in most DWDM equipment, the standard channel spacing is 100 GHz. But spacing the signal-carrying frequencies every 50 or even 25 GHz can double or even quadruple the number of channels per fiber. This job is accomplished by an optical interleaver. Such a device takes two multiplexed signals with 100-GHz spacing and interleaves them, creating a DWDM signal with channels spaced 50 GHz apart. The process can be repeated, creating even denser composite signals with 25-GHz or 12.5-GHz spacing. The signals at the receiving end are recovered with the same devices used as splitters or optical de-interleavers. Thus, devices and/or networks can be upgraded without requiring that all devices be upgraded, or network bandwidth can be increased.

Product

Optical Power Meter with Optical Head

GM8012 + 2 X GM8300X

-

UC Instruments, Corp.

GM8012 + 2 X GM8300X - UC Instruments, Corp.

The UC8820 + 2 X UC8820X optical power meter with optical head offer superior performance for the test of DWDM components, AWG & PLC components, optical amplifiers, and other general purpose of fiber optical test and measurement applications. It is special design for volume production line application.

Product

Virtual Optical Power and Energy Meter

844-PE-USB

-

Newport Electronics

844-PE-USB - Newport Electronics

The Model 844-PE-USB is a Power Meter with a USB connection to use a computer as the monitor, allowing the user to access the full computing power of the computer.