Chroma Systems Solutions, Inc.

Product

100Hz-50kHz LCR Meter –

11021/11021-L

-

Chroma Systems Solutions, Inc.

11021/11021-L - Chroma Systems Solutions, Inc.

The Chroma 11021/11021-L are the most cost-effective digital LCR Meters available, providing 100Hz, 120Hz, 1kHz, and 10kHz test frequencies for the 11021 and 1kHz, 10kHz, 40kHz, 50kHz test frequencies for the 11021-L. The standard RS232 interface, optional GPIB & Handler interfaces, high speed and stable measurement capabilities enable the Chroma 11021/11021-L for use in both component evaluation on the production line and fundamental impedance testing for bench-top applications.

Product

Battery Safety Testers

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The flexibility of our battery test equipment provides customers a test environment specifically for their application requirements.

Product

Electrical Safety Analyzer

19032

-

Chroma Systems Solutions, Inc.

19032 - Chroma Systems Solutions, Inc.

Our Electrical Safety Analyzers combine Hipot, Insulation Resistance ( IR), Ground Bond (GB), Leakage Current (LC)/AC LC/DC LC, and Dynamic Function Tests. Savings can be up to 50% of production line space by not having to purchase and rack several safety test instruments. It also increases efficiencies of electrical safety testing and reduces associated labor costs.

Product

50Hz-100kHz LCR Meter

11022/11025

-

Chroma Systems Solutions, Inc.

11022/11025 - Chroma Systems Solutions, Inc.

0.1% basic accuracyTransformer test parameters (11025), Turns Ratio, DCR, Mutual Inductance0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz test frequencies21ms measurement time (≥100Hz)Agilent 4263B LCR Meter commands compatible4 different output resistance modes selectable for non-linear inductor and capacitor measuringHigh resolution in low impedance(0.01mΩ) and high accuracy 0.3% till 100mΩ rangeAdjustable DC bias current up to 200mA (constant 25Ω) (11025)1320 Bias Current Source directly control capability0.01mΩ ~ 99.99MΩ wide measurement range (4 1/2 digits)Dual frequency function (11022 option) for automatic productionBIAS comparator functionComparator function and 8/99 bin-sorting functionPass/fail judge result for automatic productionHandler interface trigger edge (rising/falling) programmableTest signal level monitor functionStandard RS-232, GPIB, and Handler I/FOpen/short zeroing, load correctionLabView® Driver

Product

Regenerative Grid Simulators

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Rigorous testing to industry regulatons and standards for the safe operation of on-grid products.

Product

Regenerative Grid Simulator

Chroma 61800

-

Chroma Systems Solutions, Inc.

Chroma 61800 - Chroma Systems Solutions, Inc.

Full 4 quadrant, fully regenerative, AC power supply designed for common electrical product testing such as home appliances and industrial electronics that require a programmable input source

Product

Wound Component EST Analyzer

19036

-

Chroma Systems Solutions, Inc.

19036 - Chroma Systems Solutions, Inc.

The industry’s first Wound Component Electrical Safety Test (EST) Analyzer that combines impulse winding, AC/DC hipot, insulation resistance and DC resistance test measurement functions. Chroma’s 19036 Wound Component EST Analyzer has 5kVac/ 6kVdc high voltage output, 5kV insulation resistance, 6kV layer short impulse voltage and 4-wire DC resistance measurement with a maximum output of up to 40 channels. Capable of outputting and measuring AC100mA/DC 20mA, Chroma’s 19036 is suitable for testing to high power motor standards such as UL 1004-1.

Product

Milliohm Meters

Chroma 16502

-

Chroma Systems Solutions, Inc.

Chroma 16502 - Chroma Systems Solutions, Inc.

With a basic accuracy of 0.05%, Chroma 16502 offers a 0.001mΩ ~1.9999MΩ wide measurement range. It provides measurement range with 4 1/2 digits resolution. The fast measurement time is 65 ms. It suits component evaluation on production line. Pulsed test current output mode is used to reduce thermal EMFs affection on milliohm measurement. DC test current output mode is used to fasten measurement speed for inductive DUT. Dry-circuit test current output mode is used to measure such contact resistances where the maximum open-circuit voltage must be limited to 20mV.

Product

High Power Programmable AC Source

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Simulate various AC line input conditions and measurement of critical characteristics for products under test

Product

Partial Discharge Tester

19501-K

-

Chroma Systems Solutions, Inc.

19501-K - Chroma Systems Solutions, Inc.

The Chroma 19501-K Partial Discharge Tester is an instrument equipped with AC hipot test and partial discharge detection functions, providing 0.1kV~10kV of AC output, 0.01μA~ 300μA of leakage current, and 1pC~2000pC partial discharge detect ion range for measurement. Chroma 19501-K Partial Discharge Tester is compliant to the IEC60270-1 standard in particular the partial discharge testing requirements for high voltage.

Product

Solar

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

This auto test system uses the unique test command optimization technology to prevent the repeating control commands from sending to the system hardware devices. This improves the system test speed dramatically and makes Chroma 8000, which uses open software architecture, highly efficient as a close or optimized auto test system.

Product

AC Power Sources

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

AC Power Supplies designed to satisfy both automated test system and laboratory benchtop requirements.

Product

Digital Power Meter, 30A

Chroma 66205

-

Chroma Systems Solutions, Inc.

Chroma 66205 - Chroma Systems Solutions, Inc.

66205 is the 2nd generation of the 66200 series power meter designed specifically for single channel measurement. Its state-of-the-art design is capable of providing highly accurate power measurements to meet the requirements of IEC 62301/EN50564 standards. Functionality improvements of the 66205 increase power measurement capabilities to a wider range of applications.

Product

Programmable AC Electronic Load

63800

-

Chroma Systems Solutions, Inc.

63800 - Chroma Systems Solutions, Inc.

The Chroma 63800 Loads can simulate load conditions under high crest factor and varying power factors with real time compensation even when the voltage waveform is distorted. This special feature provides real world simulation capability and prevents overstressing resulting in reliable and unbiased test results.

Product

Low Power Programmable AC Source

61600 Series

-

Chroma Systems Solutions, Inc.

61600 Series - Chroma Systems Solutions, Inc.

Power:500VA (61601)1000VA (61602)1500VA (61603)2000VA (61604)4000VA (61605)Voltage range: 0-150V/0-300V/AutoFrequency: 15Hz 1000HzCompact size and weight attributable to advance PWM technologyBuilt-in PFC, provide input power factor over 0.98 (full load)AC+DC output mode for voltage DC offset simulationProgrammable slew rate setting for changing voltage and frequencyProgrammable voltage, current limitOne-key recall for 9 different voltage and frequencyLow output impedance for testing IEC 61000-3-2 ( 61605 )Comprehensive measurement capability, V, Irms, Ipk, Inrush, P, Q, S, PF, CF of current and etc.High output current crest factor, ideal for inrush current testingTurn on, turn off phase angle controlTTL signal which indicates ON/OFFAnalog programming interface3 units combined to 3-phase power outputEasy-use software for operation and ON/OFF testOptional GPIB and RS-232C interfaceFull protection: OP,OC,OV and OT protection