PCB Inspection
The check and evaulation of Printed Circuit Boards.
See Also: Visual Inspection, Bed of Nails, Flying Probes, AOI, Burn-In, Automated Optical Inspection
-
Product
78-Pin D-Type Female Straight PCB Mount
40-963-078-SF
-
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
X-ray Inspection System
TruView Prime
-
The TruView Prime is a fully motorized radiography system developed to meet the stringent requirements of electronics assembly and component inspection. The TruView Prime is professionaly built - something hard to find in entry level systems in the TruView Prime's price range.
-
Product
500-Pin Connector, Female Right Angle PCB Mount, 2 Amp
C500RFX-XPR-5A
-
The 500-Pin connector is used on switching products to provide a very high density 2A connector solution. This accessory allows a user to create their own PCB based termination solution mounted on a circuit board. The interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
01 With Pins For PCB | 10 Positions | M10
01-1xxx-20/70xx-10-N
-
Multi wafer compact selector with 36° detent angle, 6 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque
-
Product
(AOI) Automated Optical Inspection Systems
-
For automated defect detection and high-accuracy measurements. VisionGauge Online High-Speed AOI systems are perfect solutions for demanding high-throughput, high-resolution applications. These systems are perfect for a wide range of applications including MicroElectroMechanical systems (for MEMS inspection or MEMS measurement), semiconductor & discrete device inspection and measurement.
-
Product
MPI PCB Probe Systems
-
MPI Advanced Semiconductor Test
Every MPI manual probe systems can be configured with a variety of different holders for printed circuit boards (PCB’s) in order to provide in addition to on-wafer, versatile, convenient, and accurate Signal Integrity (SI) measurements with single-ended or differential RF probes. Measuring signals at the end of the channel for eye-patterns, deterministic jitter, distortion, TDR (Time Domain Reflectometry) impedance, cross-talk, coupling, and losses, or even S-parameters is easily accomplished.
-
Product
Real-time X-ray Inspection Systems
Ultra-Compact™
-
Glenbrook Technologies redefines X-ray Inspection with our smallest JewelBox Micro focus x-ray system yet. With dimensions of just 22”W x 26”L, it’s small enough to fit on a standard desk, in an office or small lab. But it’s big in capabilities with >500x magnification , 5 axis manipulator and advanced image processing. To view our product video, please click below the product image to the right.
-
Product
X-Ray Inspection System
TruView™ Cube
-
The Perfect Solution for a Powerful Small Form Factor X-ray Inspection System. The all new TruView™ Cube X-Ray Inspection System is a fully motorized radiography system developed to meet the stringent requirements of electronics assembly and component inspection. Ideal for applications where space is premium, the the TruView™ Cube X-Ray sits comfortably on your laboratory bench.
-
Product
Magnetic Particle Inspection
-
Shanghai Xianda Denshijiki Industry Co.,Ltd
Using the "leakage magnetic flux" phenomenon generated from the scratches, the magnetic powder (or fluorescent magnetic powder) of the ferromagnetic material scattered on the surface by magnetizing the specimen is adsorbed to the scratch. Observe this and detect scratches.
-
Product
Customized Semiconductor Wafer Inspection, Sorting & Metrology Equipment | Systems
Customized Solutions
-
Unique Needs? Need better wafer inspection throughput, accuracy, versatility? Need a wafer defect inspection expert who’s not a sales person? We’ve been providing complete semiconductor wafer inspection, sorter, and microscopes solutions to semiconductor wafer manufacturers since 1994.
-
Product
04 With Pins For PCB | 1 Wafer | 24 Positions
04-1xx3-20/70-xx
-
Very robust, multi wafer selector with 15° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
PHOTOMASK INSPECTION MACHINE
NEGATIVE FILM
-
Negative film and photomask inspection originated from the extensive use of printed circuit boards. Negative films and photomasks are used in large quantities. The early detection method is to use the "inspection light table" for inspection, which requires too much manpower and material resources, and manual testing may be due to eye fatigue and negligence.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type Q, Ø0.80mm, 230gf
K100-Q080230-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style Q, Tip Diameter Ø0.80mm, Spring force 230gf, Steel with Gold Plating.
-
Product
Pull-Thru Adapter, PCB, QuadraPaddle, to 96 Pin FML DIN, f/ NI PXIe-4322
510140250
Pull-Thru Adapter
Pull-Thru Adapter, PCB, QuadraPaddle, to 96 Pin FML DIN, f/ NI PXIe-4322.
-
-
Product
RFID Label Inspection System
Eurotech RFID FS
-
The Eurotech RFID FS RFID accurately rewinds rolls of RFID labels and validates their receptivity by running them through the Voyantic Tagsurance RFID inspection system. The unit allows stopping at a predetermined editing spot for the removal and replacement of the defective piece, as well as indicating defective labels by a mark printed by an inkjet system integrated with the machine. Adjustment of the closed loop tension control system can be made through adjusting the parameters on the software that control the servo motor control system. This gives the customer a virtual infinite range with which to wind their labels without cracking the inlay or antenna. As well accurate web adjustment and guidance is provided with a web guide system complete with an ultrasonic sensor. The Eurotech RFID FS RFID label inspection system is equipped with the Voyantic Tagsurance for testing the performance of RFID tags. This is done by verifying that the tag responds to commands on its whole operational frequency range, which means testing the tag on multiple frequencies, also outside the RFID reader frequency. Accurate power output combined with the Voyantic Snoop Pro antenna, optimized for testing tags inline at high speed, allows defining precise acceptance criteria and achieving stable quality.
-
Product
96-Pin SCSI Micro-D Straight PCB
40-963-096-SF
-
Ideal for user created termination schemes where the termination is to be on the front of the product or remotely connected to the module by cable. Suitable cables for this product are detailed in the data sheet. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
04 With Pins For PCB | 3 Wafers | 12 Positions
04-3xx4-20/70-xx
-
Very robust, multi wafer selector with 30° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
Foreign Matter Inspection Device For FPDs
HS-930
-
By adopting our original optical technology, we achieve an inspection speed of about 30% up (compared to HS-830). Improved the front / back judging ability to thin substrates.
-
Product
Module, Receiver, RTCASS, Coaxial, 64 Position, Discrete Wiring or Side PCB Mount
510113142
Receiver Module
Module, Receiver, RTCASS, Coaxial, 64 Position, Discrete Wiring or Side PCB Mount.
-
Product
04 With Pins For PCB Or Soldering Eyelets | 12, 24 Positions | 1 - 4 Wafers
04-Selector-Overview
-
Very robust, multi wafer selector with up to 24 positions, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
01 With Pins For PCB | 12 Positions | M6
01-1xxx-20/70xx-12-M
-
Multi wafer compact selector with 30° detent angle, 3 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque
-
Product
Aluminum PCB
-
The heat dissipation afforded by this construction is dramatically superior to standard FR-4 constructions. The dielectrics used are typically 5 to 10 times as thermally conductive as conventional epoxy-glass and a tenth of the thickness resulting in thermal transfer exponentially more efficient than a conventional rigid PCB. This is so effective that lower copper weights than suggested by the IPC heat-rise charts can be used.
-
Product
In-Line Wafer Surface Defect Inspection
ALTO-SD-150/200
-
ALTO-SD SERIES IS AN IN-LINE INSPECTION SYSTEM SUPPLYING HIGH THROUGHPUT, FULL SURFACE DEFECT INSPECTION FOR ALL KINDS OF WAFERS INCLUDING SILICON, QUARTZ, SAPPHIRE, COMPOUND AND MEMS WAFERS. HIGH-RESOLUTION CAMERA OPTICS PLUS LED ILLUMINATION GUARANTEE RELIABLE DETECTION OF ALL LOCAL DEFECTS. IT INSPECTS DEFECT SIZE OF 1~ 10 MICRONS, CONFIGURABLE INSPECTION RESOLUTION TO OPTIMIZE DEFECT SIZE VS. THROUGHPUT. THE SYSTEM COMBINES HIGH-PRECISION MEASUREMENT, POWERFUL DATA ANALYSIS AND USER-FRIENDLY OPERATIONS.
-
Product
Fiber Optic Inspection
-
Optical Wavelength Laboratories
A dependable connector endface inspection scope is a vital part of any fiber optic professional’s tool kit. Inspecting patch cord connector endfaces before attaching them to equipment or patch panels saves time and effort, and ensures a clean, quality connection. These 400x video inspection scopes allow users to view connector endfaces on a PC or laptop screen, preventing harmful invisible light from entering the users eye, and ensuring maximum eye protection.
-
Product
High Force Type Prbobe For PCB, K100 Series 100 Mil Pitch, Receptacle
KR100
Spring Probe
K100 Series, Pitch 100mil, Receptacle, no wire wrap pin. Brass with gold finish.
-
-
Product
Motor Vehicle Inspect Lines Engineer Program
-
Foshan Analytical Instrument Co, Ltd.
It is suitable for measurement of motor vehicles equipped ignition engine with max total mass more than 3500kg.Including the dual idle speed method test.Meet the requirement of GB18285-2005"Limits and Measurement Methods for Exhaust Pollutomts from Vehicles Equipped Igintion Eigine under Two-speed Idle conditions and simple Driving Mode Conditions".The system can select the prompt mode of the dirver mode or the prompt mode of lattice screen.
-
Product
Micro Coax, Two Piece Contact, ITA, PCB Vertical Mount, Solder
610141109
Coax Contact (ITA)
For vertical PCB terminationsUsed with standard 50 and 120 Pin Micro Coax ModulesUp to 10GHz transmission speeds (PCB design dependent)Two-piece contact that allows for pin replacement, field repairableMates to all existing Micro Coax contacts
-
