Product

Shielded Bag Test Kit

PBT-531

-

Prostat Corporation

PBT-531 - Prostat Corporation

The PBT-531 is a complete system kit designed to evaluate the performance of electrostatic discharge shielded bags and other packaging materials.

Product

DMX512 Test Box

GIZMO

-

Doug Fleenor Design, Inc.

GIZMO - Doug Fleenor Design, Inc.

The Gizmo is a DMX512 test tool with features useful for lighting system setup, testing, troubleshooting, and commissioning. With the Gizmo you can transmit, receive, save, playback scenes and perform a variety of data and cable tests.

Product

Shield Level / Pathloss Equipment

SG1000B/PR1000A

-

Praxsym

SG1000B/PR1000A - Praxsym

The SG1000 Signal Generator and PR1000A Preamplifier have been designed to simplify the measurement of shielding integrity in a shielded enclosure. When coupled with a high stability spectrum analyzer and an appropriate selection of test antennas, the SG1000/PR1000A combination can measure shielding effectiveness at all of the NSA 94-106 (supersedes NSA 65-6) defined test frequencies from 1 kHz to 10 GHz.The PR1000A amplifies the received signal from the test antenna and overcomes the high noise figure of the companion test receiver or spectrum analyzer. The PR1000A will ensure that the system noise figure will be less than 4.5 dB at all test frequencies from 1 kHz to 10 GHz. When used with a spectrum analyzer measurement bandwidth of 100 Hz, the system exhibits a sensitivity of -150 dBm at the test antenna output.​To overcome high cable loss between the test antenna and the PR1000A assembly at 10 GHz, a remote low noise pre-amplifier (Praxsym PN 310-010091-001) is mounted directly onto the 10 GHz antenna.

Product

42-Pin Male Nano-Pitch To 42-Pin Male Nano-Pitch, Shielded OCuLink Cable

785486-01

-

NI

785486-01 - NI

Nano-Pitch Male to Nano-Pitch Male OCuLink x4 Cable, 1 m

Product

RF Shielded Test Enclosure, I/O Intensive Device Tests

JRE 1720

-

JRE Test, LLC

JRE 1720 - JRE Test, LLC

Like its other brothers in the JRE test line, it features rugged welded aluminum construction with superb RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble-free operation over its lifespan. A JRE exclusive, our triple door locking mechanism allows easy single handle door operation. Ventilation is standard with our JRE exclusive honeycomb style vents in enclosure rear and door.

Product

MAX31856 Thermocouple Sensor Arduino Shield

SEN-30007-T

-

Playing With Fusion Inc

SEN-30007-T - Playing With Fusion Inc

Quad channel thermocouple Arduino shield based on the MAX31856 universal digital thermocouple interface IC. This is an exciting update of the MAX31855, with improvements in resolution (19 vs 14 bits), on-board temperature reference (6 vs 4 bits), and compensation (fully compensated vs nonlinear correction required). The MAX31856 is interfaced via 4-wire SPI with options for interrupt triggering. An LDO and a high-speed level shifter are included on ALL device pins to allow interfacing with to any Arduino - both 3.3V and 5.0V variants - without sacrificing device performance in any operating condition.

Product

Chambers and Glove Boxes

-

Electro-Tech Systems, Inc.

Electro-Tech Systems, Inc.

Standard Environments: ETS' multi-purpose benchtop units for laboratory and production use are large enough to accommodate testing and fabrication, as well as storage of materials, test equipment, and assemblies, yet they are small enough to fit on a standard workbench. The systems are able to independently maintain humidity from <5% to >95% RH and temperature from -22F to 122F (-35 to 50C) when unit is placed in an ambient environment location.

Product

Decade Boxes

-

Transcat, Inc.

Transcat, Inc.

Transcat stocks the decade boxes for your precision measurement applications. Using a series of resistors, capacitors or inductors, a decade box simulates electrical values. Switches are arranged in decades (sections of 10) where values from 0-9 are selected. Configured boxes can be substituted into a circuit as a component to determine the appropriate value for circuit operation. They can also be connected to input devices for testing. After connection to the decade box, a device should display a reading corresponding to the previously set box value. Our wide selection of decade resistance boxes include models that can serve as standards in verifying the accuracy of resistance-measuring devices. We offer a wide variety of boxes built by IET Labs, Prime Technology and AEMC.

Product

Shield Level / Pathloss Equipment

PAMS & PAMS-C

-

Praxsym

PAMS & PAMS-C - Praxsym

PAMS is a user-friendly, transmitter and receiver system that measures shielding effectiveness in RF shielded enclosures.   Lightweight and compact, each PAMS unit measures approximately 12” x 5” x 5” and weighs 5.5 lbs., making PAMS ideally suited to field measurement tasks.  Rugged construction insures instrument survivability in a field test environment. PAMS-C is a simple and efficient solution for quickly identifying shielding faults in an RF shielded enclosure.  Cousin to the original PAMS used extensively by customers operating RF Shielded Enclosures, PAMS-C gives commercial end-users everything needed to measure shielding effectiveness levels of critical infrastructure - all with minimal or no interruption to normal operations.

Product

MAX31855 T-Type Thermocouple Arduino Shield

SEN-30004-T47

-

Playing With Fusion Inc

SEN-30004-T47 - Playing With Fusion Inc

Four channel MAX31855 digital thermocouple Arduino Shield. Two versions of this shield are avaliable for each thermocouple type: either 'Ch 0-3' (CS pins use Uno/Mega IO pins 7-10) or 'Ch 4-7' (CS pins use Uno/Mega IO pins 3-6), with the only difference being which set of zero-ohm resistors are populated on the board. This allows use of other SPI devices that may be 'hard coded' to specific digital pins on the Arduino, or simply stacking one of each type together to get a total of eight thermocouple channels on one Arduino.

Product

802.11a,b,g RF Shielded Test Enclosure

JRE 0709-A

-

JRE Test, LLC

JRE 0709-A - JRE Test, LLC

Containing all the capability of the larger JRE enclosures, the compact 0709-A is ideal for small wireless devices such as; 802.11a,b,g WLAN access points, VoIP devices and other small RF devices. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

802.11a,b,g RF Shielded Test Enclosure

JRE 0814-A

-

JRE Test, LLC

JRE 0814-A - JRE Test, LLC

Testing tall devices? The 0814-A stands up to any test up to 18 GHz! Featuring a wide swing open door with durable latch handle, this enclosure is ideal for testing IEEE 802.11 a,b,g devices such as; WLAN, VoIP, access points and other RF devices.

Product

Stationary Sensor Box

S-SB10

-

SONOTEC GmbH

S-SB10 - SONOTEC GmbH

The S-SB10 can be operated with both airborne and structure-borne sound probes. This allows very versatile conditions and processes to be monitored. For example, airborne ultrasound can be used to detect turbulent flows of gases at leakages as well as partial discharge processes at electrical systems. Both processes generate high-frequency ultrasonic signals .

Product

Modular TPC - Computing Box Module With Intel® Core™ I3-N305 Processor

TPC-B520L

-

Advantech Co. Ltd.

TPC-B520L - Advantech Co. Ltd.

Modular Computing Box powered by Intel® Core™ i3-N305, octo-core processorModular Front Panel modules ranging from 12.1" to 23.8" with P-CAP multi-touch in selection (12.1", 15", 15.6", 21.5" with high brightness panel option)Single DDR5 Memory slot supports up to 16GBSupport expansion via three M.2 slots (PCIe, Wifi, 5G)LAN, POE, isolated serial port and isolated digital I/O via iDoor technologySupport Type-C connector with USB 3.2, DP 1.4a, 15W power deliverySupport fieldbus protocols/GPS/GPRS/Wi-Fi capabilities via iDoor technologyPerformance, fanless embedded system with chassis grounding protection

Product

PAT Check Box

369A910

-

Di-Log

369A910 - Di-Log

The only check box to provide comprehensive verification of 17th Edition and PAT test equipment. The Powercheck tests for full earth continuity, insulation, resistance, RCD trip time, RCD trip current, touch current and flash test verification.

Product

Decade Box, Calibrated, Capacitance, 5, 100pF to 11111µF, 5 %

72-7265 CAL

-

Tenma

72-7265 CAL - Tenma

The 72-7265 CAL from Tenma is a capacitance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set at any non polarized capacitor value from 100pF to 11,111µF in 100pF increments. The decade accuracy is ±5% capacitors used throughout at <1μF, 1KHz test frequency, ≥1μF, 100Hz test frequency. It has weight of 304g/0.69lb and dimension is 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

DISCRETE TMTC INTERFACE BOX

-

Temis S.r.l.

Temis S.r.l.

The Discrete TM/TC Box is a 6U custom 19’’ rack equipment that could be filled with 6U, 4HP plug-ins covering the main ECSS compliant discrete I /Fs. The I/O signals of this box are all arranged in the rear side of the box, keeping clear the front side: in this way no accidental operation could be performed on the box.

Product

Shielding Cube

CMQ200

-

Rohde & Schwarz GmbH & Co. KG

CMQ200 - Rohde & Schwarz GmbH & Co. KG

The R&S®CMQ200 is a compact and fully integrated solution to cover most 5G devices in various applications. The drawer concept enables fully automated handling in manufacturing environments. The robust mechanical design ensures millions of test cycles for reliable mass production environments. The flexible cube design covers applications for smart devices, CPEs, RFIC and prototypes. R&S®CMQ200 is ready for 5G and other technologies in the frequency range from 20 GHz to 77 GHz.