Product

MAX31855 J-Type Thermocouple Arduino Shield

SEN-30004-J47

-

Playing With Fusion Inc

SEN-30004-J47 - Playing With Fusion Inc

Four channel MAX31855 digital thermocouple Arduino Shield. Two versions of this shield are avaliable for each thermocouple type: either 'Ch 0-3' (CS pins use Uno/Mega IO pins 7-10) or 'Ch 4-7' (CS pins use Uno/Mega IO pins 3-6), with the only difference being which set of zero-ohm resistors are populated on the board. This allows use of other SPI devices that may be 'hard coded' to specific digital pins on the Arduino, or simply stacking one of each type together to get a total of eight thermocouple channels on one Arduino. The MAX31855J supports a measured temperature range of -210C-1200C with known thermal characteristics and output resolution of 0.25C. Included thermocouple connectors are type-specific to provide proper material continuity as close to the IC as possible. The SEN-30004 is interfaced via 3 or 4-wire SPI and a high-speed level shifter is included to allow the board to plug directly into an Arduino Uno or Mega

Product

EMI Shielding

-

Parker Hannifin Corp.

Parker Hannifin Corp.

Parker Chomerics electromagnetic interference (EMI) shielding product family spans a wide variety of uses and applications, including an extensive selection of EMI gaskets, shielded windows, shielded honeycomb air vents, cable shielding products, grounding solutions, shielding laminates, and metal foil tapes. It also includes conductive adhesives, coatings, sealants, greases and inks, as well as conductive plastics.

Product

Shielded Container with GR1 CZT-Based Gamma Radiation Detector

Quant GR1

-

Kromek Group plc

Quant GR1 - Kromek Group plc

Quant GR1 is a gamma detector solution for mobile laboratory radionuclide analysis. It is designed for measuring the activity of radionuclides in filters, filter papers, beakers of samples. It comes with an optimised and integrated lead/copper shield that enables operation in both standard and raised backgrounds.

Product

Breakout Boxes 9D thru 104DD Positions

D-SS Series

-

Silver Engineering, Inc.

D-SS Series - Silver Engineering, Inc.

Silver Engineering's D-SS Series Breakout Box is aheavy duty break out box designed to withstand theabuses of the test environment. The heavy dutyconstruction and the use of high quality stainlesssteel connector shells and components insurethese units will last for years.

Product

IEC60529 IPX1/2 Vertically Drip Box

CX-IPX1/2

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-IPX1/2 - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60529 IPX1/2 Vertically Drip Box

Product

MAX31856 Thermocouple Sensor Arduino Shield

SEN-30007-ST

-

Playing With Fusion Inc

SEN-30007-ST - Playing With Fusion Inc

Quad channel thermocouple Arduino shield based on the MAX31856 universal digital thermocouple interface IC. This is an exciting update of the MAX31855, with improvements in resolution (19 vs 14 bits), on-board temperature reference (6 vs 4 bits), and compensation (fully compensated vs nonlinear correction required). The MAX31856 is interfaced via 4-wire SPI with options for interrupt triggering. An LDO and a high-speed level shifter are included on ALL device pins to allow interfacing with to any Arduino - both 3.3V and 5.0V variants - without sacrificing device performance in any operating condition.

Product

MAX31856 Thermocouple Sensor Arduino Shield

SEN-30007-J

-

Playing With Fusion Inc

SEN-30007-J - Playing With Fusion Inc

Quad channel thermocouple Arduino shield based on the MAX31856 universal digital thermocouple interface IC. This is an exciting update of the MAX31855, with improvements in resolution (19 vs 14 bits), on-board temperature reference (6 vs 4 bits), and compensation (fully compensated vs nonlinear correction required). The MAX31856 is interfaced via 4-wire SPI with options for interrupt triggering. An LDO and a high-speed level shifter are included on ALL device pins to allow interfacing with to any Arduino - both 3.3V and 5.0V variants - without sacrificing device performance in any operating condition.

Product

Edge AI Box

EPC-R7200

-

Advantech Co. Ltd.

EPC-R7200 - Advantech Co. Ltd.

Industrial-Grade Nvidia Jetson Barebone PC

Product

Fifo Serial Analyzer 2 TO 2 Breakout Box

FLL222

-

Fifo Electronics

FLL222 - Fifo Electronics

The FLL222 Break Out Box is designed to be used with the FLL and FSA serial analyzers to monitor full duplex bidirectional data. The serial line passes through FLL222 using the 9-pin connectors on the unit. Data from pin 2 of the serial line is available on pin 2 in the first output cable. Pin 3 data is available on pin 2 of the second cable. The output cables can be plugged into the COM ports of the PC running the serial analyzer.

Product

Box Rain Test Chamber

-

ACE Technology Limited

ACE Technology Limited

Comprehensive box rain test chamber is used to test the electric and electronic devices by simulating natural rainfall with spraying water from the water nozzles on swing pipe or straight tube. To estimate and recognize if the shell or sealing elements of these divice could ensure a good condition of working during and after the test.

Product

Absorber Lined Shielding Enclosure Measurements

ALSE

-

Seibersdorf Labor GmbH

ALSE - Seibersdorf Labor GmbH

Due to on-going work in the standardization committee CISPR D (responsible for CISPR 25) the latest issue CISPR 25 Ed. 4.0 has not been cited to-date. In the meantime we are able to offer two different validation procedures:

Product

Medical Box PC

-

ADLINK Technology Inc.

ADLINK Technology Inc.

ADLINK’s medical box pc, compliant with IEC 60601-1 (3.2 edition) / IEC 60601-1-2 (4.1 edition) for safety and performance of medical equipment, is designed to build in space-limited medical devices, such as C-arm and surgical navigation system. The medical grade platform features ADLINK’s MXM Graphics Module supporting NVIDIA GPU, ensuring the acceleration of image reconstruction and beamforming and moreover, significantly reducing data transmission delay, lowering latency and enhancing image quality with AI to assist doctors in detecting diseases or other abnormalities.

Product

802.11a,b,g Dual RF Shielded Test Enclosure

JRE 0814-2R-A

-

JRE Test, LLC

JRE 0814-2R-A - JRE Test, LLC

Containing all the capability of the larger JRE enclosures, the rack mounted 0814-2R-A is ideal for testing IEEE 802.11 a,b,g devices such as; WLAN, VoIP, access points and other RF devices. Two independent 0814 series enclosures are mounted in one 19 inch rack. Two shielded vents provide excellent cooling and optional fan(s) are available for those hot products. Tough 'honeycomb' vents maintain shielding effectiveness throughout the frequency range. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

Fiber Demarcation Boxes

-

AFL

AFL

Integrate FTTX activities into a small and compact wall mount enclosure, providing a safe space to splice, split, distribute, store, and cross-connect fiber optic. Mexfoserv® has a large variety of models available to fit our customers’ needs and specifications, ranging from size, amount of ports, moist and dust protection, indoor and outdoor models, different cable acceptance diameters, among others.

Product

OBD-II Breakout Box

PPECB

-

Power Probe Group, Inc.

PPECB - Power Probe Group, Inc.

The Power Probe OBD-II Breakout Box is a CAN Bus circuit tester compatible with 12 and 24 Volt systems. The tool connects directly into the Vehicle’s Data Link Connector (DLC) testing for any abnormalities such as shorting and reverse polarity at the pins. If shorting or reverse polarity is present, connecting the PPECB first will prevent harm before connecting a Diagnostic Scan Tool. The Breakout Box provides a live display of present communicating signals without having to use a Digital Multimeter. Additionally, you can quickly test the voltages at all 16 pins.

Product

Instrument ER Shielded Cases

-

ELMA Electronic, Inc.

ELMA Electronic, Inc.

The Optima Stantron ER (shielded) and EX (unshielded) family of instrumentation cases are designed to house EIA standard 19” wide sub-racks and chassis. The rugged yet lightweight and stackable structural design is achieved with rigid front and rear aluminum bezels joined by rounded, extruded aluminum corner members. All panels - side, top and bottom are constructed of 18 ga. CRS. Select from a wide range of top, bottom and side panel options. Accessories for doors, shelves, power and co