Product

SF Series Corrosion Cabinet

-

Atlas Material Testing Solutions

Atlas Material Testing Solutions

The SF Series are rugged and reliable traditional salt fog (spray) and humidity cabinets. SF cabinets are used to quickly qualify a coating or material on a pass-fail basis, or determine the probability of corrosion of a specific material.

Product

Shield Level / Pathloss Equipment

PAMS & PAMS-C

-

Praxsym

PAMS & PAMS-C - Praxsym

PAMS is a user-friendly, transmitter and receiver system that measures shielding effectiveness in RF shielded enclosures.   Lightweight and compact, each PAMS unit measures approximately 12” x 5” x 5” and weighs 5.5 lbs., making PAMS ideally suited to field measurement tasks.  Rugged construction insures instrument survivability in a field test environment. PAMS-C is a simple and efficient solution for quickly identifying shielding faults in an RF shielded enclosure.  Cousin to the original PAMS used extensively by customers operating RF Shielded Enclosures, PAMS-C gives commercial end-users everything needed to measure shielding effectiveness levels of critical infrastructure - all with minimal or no interruption to normal operations.

Product

RF Shielded Test Enclosure, Large interior for multiple device

JRE 1812

-

JRE Test, LLC

JRE 1812 - JRE Test, LLC

Developed expressly for high volume testing of larger RF devices, the 1812 is roomy enough for holding both TX and RX devices for actual on-air tests. Top loading keeps door swing out of the way on congested benchtops. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

Standard VXI Module Shield Kits Without Address Switch Opening

-

ICS Electronics

ICS Electronics

* Single-slot kit fits all VXI-1 Revision 1.0 to Revision 3.0 chassis.* Same design described above but without the address switch opening.* Complimentary layout support includes PCB design template and CAD layout files.

Product

RF Shielded Test Enclosure, Ideal for tall RF devices

JRE 3036

-

JRE Test, LLC

JRE 3036 - JRE Test, LLC

For testing tall devices, the JRE 3036 is ideal! Large enough to fit entire computer systems inside, as well as their associated components, everything will be securely isolated from the outside world. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

RF Shielded Box

LTL B12001

-

Liveon Technolabs

LTL B12001 - Liveon Technolabs

LTL B12001 RF Test Enclosure is the streamline solution to manage your RF Testings. LTL B12001 RF shielded test enclosure can comfortably houses the intermediate and large devices on test such as Laptops, larger test Fixtures and other large RF devices.LTL RF Enclosures are available in aluminum and stainless steel models and come with a specialized EMI gasket which enables stable and effective RF shielding performance in all frequency bands.

Product

Pioneer Seismic Cabinet

-

ELMA Electronic, Inc.

ELMA Electronic, Inc.

The Pioneer rack is the cornerstone of our broadcast cabinet line, offering flexibility and strength. With a weight capacity of 2,000 lbs., Pioneer’s heavy-duty frame is designed with cross braces interlocked and welded into the corner post.

Product

Interface Technology Style VXI Module Shield Kits

-

ICS Electronics

ICS Electronics

*Encloses Interface Technology style, slotted-edge, C-size PC boards All kits include side shields, a pre-machined blank front panel, ejector handles, all necessary hardware and assembly instructions. * All kits are available with customized front panels and side shields.

Product

Aspirated Radiation Shield

-

Apogee Instruments, Inc.

Apogee Instruments, Inc.

The fan has an ingress protection (IP) rating of 55, virtually eliminating moisture and dust ingress. At full speed the power requirement is 1 W (80 mA at 12 V DC). To conserve power fan speed can be reduced, via pulse width modulation (PWM), to 0.3 W at night or when wind speed is greater than 3 m s-1 without loss of accuracy. If the fan is continuously operated at full speed lifetime is rated at 50,000 hours (5.7 years). The fan includes a tachometer, allowing RPM to be mounted to detect obstruction of the fan.

Product

MIMO Antenna Assembly for Shield Box

HDRF-MIMOST2570

-

RF Electronics

HDRF-MIMOST2570 - RF Electronics

MIMO Antenna setup assembly customized for HDRF-series shield boxes

Product

Arduino Shield Header Kit

INT-19002

-

Playing With Fusion Inc

INT-19002 - Playing With Fusion Inc

Complete header set for Arduino Uno shields. Contains: 1 1x6, 2 1x8, 1 1x10, and 1 2x3 header. These headers have square pins and fit into standard 0.1" breadboards. Gold plated and RoHS compliant.

Product

Shield room / box

-

Microwave Factory Co,Ltd.

Microwave Factory Co,Ltd.

Shield room is the equipment to shut-out the electric/magnetic wave signals from outside and not to leak the electric/magnetic wave signals from inside. We can support as custmized request on room/box size, performance.

Product

Shield

Arduino 4 Relays Shield

-

Arduino

Arduino 4 Relays Shield - Arduino

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2 pole changeover contacts (NO and NC); in order to increase the current limit of each output the 2 changeover contacts have been put in parallel. Four LEDs indicate the on/off state of each relay.

Product

RF Shielded Test Enclosure, for Laptop Testing

JRE 2218

-

JRE Test, LLC

JRE 2218 - JRE Test, LLC

Breeze through laptop RFI and wireless tests with the 'bigger than-a-breadbox' 2218! Like its other brothers in the JRE test line, it features rugged welded aluminum construction with superb RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble-free operation over its lifespan.

Product

Arduino CAN Shield

IFB-10003-ANP

-

Playing With Fusion Inc

IFB-10003-ANP - Playing With Fusion Inc

CAN (Controller Area Network) communication has become ubiquitous in industry. It is used in automotive applications (part of OBD and many other datalinks), on-highway trucks (J1939), industrial machinery and instrumentation, and equipment applications (factory automation). This shield is designed to provide a CAN 2.0 front-end interface for 5V Arduino modules (Uno, Mega, etc). The module uses SPI to communicate to the Arduino, and requires an aditional chip select pin. An optional interrupt line to the MCP2515 and two LEDS are also provided. The chip select and interupt lines are selected via zero ohm resistors and have several configuration options for flexibility stacking additional shields. A set of stackable headers is included with this board, not installed. An optional on-board voltage regulator may be used to supply 7.5V to the Arduino's 'Vin' pin (which is regulated to 5V by the Arduino's on-board LDO). The CAN shield regulator supports a wide input range of 9V to 32V. This makes it possible to cleanly build a stand-alone CAN node (remote sensor) without the need for a separate Arduino power supply!

Product

Digital Cabinet X-ray System

XPERT 80

-

Kubtec

XPERT 80 - Kubtec

Kubtec's XPERT 80 brings high quality imaging and ease of use to science and research. The XPERT 80's compact self-contained cabinet, with a high resolution x-ray source, provides the sharpest images for every application. Optional sources are also available for micro-focus and soft x-ray applications.

Product

802.11a,b,g Dual RF Shielded Test Enclosure

JRE 0814-2R-A

-

JRE Test, LLC

JRE 0814-2R-A - JRE Test, LLC

Containing all the capability of the larger JRE enclosures, the rack mounted 0814-2R-A is ideal for testing IEEE 802.11 a,b,g devices such as; WLAN, VoIP, access points and other RF devices. Two independent 0814 series enclosures are mounted in one 19 inch rack. Two shielded vents provide excellent cooling and optional fan(s) are available for those hot products. Tough 'honeycomb' vents maintain shielding effectiveness throughout the frequency range. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.

Product

Shield Level / Pathloss Equipment

PathTrax

-

Praxsym

PathTrax - Praxsym

Identical in form factor to the PAMS and PAMS-C, PathTrax provides an optimum solution for site surveys. Once the receiver is calibrated with the transmitter, the receiver measures path loss directly. PathTrax systems are available to cover several frequency bands each 75MHz wide, centered on 838 MHz, 860 MHz and 915 MHz. A PathTrax centered at 500MHz, covering 25MHz of bandwidth is also available.