Big Data
boundless digital processing.
-
Product
625 KHz Data Acquisition Multifunction (16 ADC, 2 DAC) PCMCIA W/T30 Cable & SRA-1
MF236/i(DAQi616MF)
-
The DAQi616MF is a type II PCMCIA I/O card for notebooks and other computers containing a PCMCIA slot.
-
Product
Submersible, Thermocouple Based Temperature Data Logger
TCTemp1000
-
The TCTemp1000 is a rugged, submersible, battery powered, thermocouple based temperature data logger. This is a stand-alone, compact, portable, easy to use device that can measure and record data for up to 16,383 measurements per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. Its real time clock ensures all data is time and date stamped.
-
Product
4 Digit LCD Data Display
DDM 4
-
The DDM 4 is a low power 4 digit data display module with 12.5mm (0.5") digit height. Inputs are CMOS and TTL compatible. Using three inputs Clock, Data In and Load, it is possible to display 0 to 9 and A to F or any other combination of the segments. The display can be panel mounted using the bezel and window
-
Product
Data Loggers
-
Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. The data logger contains a sensor to receive the information and a computer chip to store it.
-
Product
Wireless Data Logger
-
IM2100 Series Scanners are useful for scanning parameters like temperature, flow, humidity, pressure etc and indicate them in a multiplexed manner. These scanners show the values one after the other in preprogrammed time interval called scan time. Options like PC communication, alarm relays are available. Scanners can communicate with SCADA software and are suitable for Data Acquisition system where local recording is not required.
-
Product
High Speed Data Acquisition Board
MS 1800
-
*Bus Interface:- 64 Bit PCI Bus with PMC Interface*Virtex-4 FPGA based design*32 channel digital I/O signal*RS232 & RS485 Interface*32MB Flash*2MB Static RAM for data storage*Analog Inputs:- 2 Channel*Input Resolution:- 14 Bits*Sampling rate up to 80MSPS*Filter:- Low Pass Filter for all channels*Two Analog Outputs*14 bit Resolution*Driver interface for Windows2000/XP/VISTA and LINUX OS*Self Test future
-
Product
Data Acquisition
-
Collect force, force and displacement or torque data from force gauges, torque gauges and testers with RS-232 or USB ports.
-
Product
Data Recording System
Director DII - DFR DDR
-
Using the Microsoft Windows 10® operating system, DII features complete Transient and Long-Term Phasor Data Recording, Analysis, and Transmission. E-MAX DII has a maximum capacity of 128 Analog and 256 Digital directly connected channels.
-
Product
Data Acquisition (DAQ) for R&D and Testing Applications
-
While Memory Hicorders don’t have sampling speeds that are as fast as those of digital oscilloscopes, these waveform recorders can be used to record various types of signals without worrying about potential differences between them and without using isolation amplifiers.
-
Product
Network Enabled Data Logging
IntelliLogger
-
Logic Beach offers a full spectrum of rugged data logger / data acquisition, alarming and reporting instruments that are used world-wide in test and long-term monitoring and reporting applications. Moreover, IntelliLoggers™ are stand-alone data acquisition instruments that sample input signals, process the readings per a user defined program, assert alarms and store collected data to instrument memory for later download to a PC for plotting and analysis. Continuing on, the IntelliLogger™ data logger line (excluding the IL-Mini) features network connectivity via Ethernet, WiFi and Cellular enabling the instruments to send status/alarm emails, FTP data to servers for unattended data archiving and even support browser access for current reading display, system status and data downloads.
-
Product
Industrial Data Communications
-
In this section you will find hundreds of industrial-grade infrastructure, gateway and conversion products for all major data communications protocols. Amplicon can specify a solution for almost any data communications task, including transmission solutions for wireless, copper and fibre optic based links.
-
Product
MDS Data Analyser
-
Read and display in a single Waterfall diagram of selected data files.Max, Average, Min mathematical functions on selected data area.Copying data from selected visual area to a single data file.Filtering of collected data with Background spectrum.Rainbow Color based signal recurrency visualisation.Custom data processing (analysis) modules.
-
Product
Data Processing System
CRS-D8I-3VF1
-
The CRS-D8I-3VF1 VPX system’s I/O flexibility is capable of meeting a large number of configurations. It is designed to support Abaco Systems’ Intel 3rd generation Core i7 3U SBCs, Gigabit Ethernet switch, video compression card, CUDA-based graphics cards and a MIL-STD-1553/ARINC429 multi-protocol card.
-
Product
Ethernet & Wireless Data Loggers
-
Dataloggers with Ethernet or wireless interfaces for temperature, humidity, pressure and process inputs.
-
Product
Suite Of Data Analytics Software
Umetrics®
-
The Umetrics® Suite of data analytics software gives you access to powerful yet easy-to-use tools to optimize your manufacturing processes and bring quality products to market faster. Use the data analytics software to develop robust, high-quality products, continually improve processes and maintain control during manufacturing. These tools support regulatory compliance, enable digital transformation and facilitate quality by design.
-
Product
Pressure, Strain And Shock Data Loggers
-
Dataloggers for pressure, bridge input for strain or load measurement and also tri-axial shock dataloggers with built in accelerometers.
-
Product
DCON RS-485 Data Acquisition
-
DCON ASCII modules communicate over RS-485 and come in many analog and digital I/O configurations including current, voltage, thermistor, thermocouple, RTD, and strain gauge. They can be daisy chained together over insulated copper wires. The I-7000 series is distributes I/O communicate over DCON ASCII Protocol over RS-485 and are available in a bevy of digital and analog configurations, much like the M-7000 series. The tM series, tiny compact modules, communicate over Modbus RTU and DCON protocols and provide Analog and Digital I/O functions like isolated digital input, relay and open-collector output.
-
Product
Mission Data Transmitters
-
L3 Cincinnati Electronics (L3 CE) offers a wide choice of modulators and transmitters for spacecraft ranging from X-Band to Ku-Band. All the products listed below can be customized to specific user requirements.
-
Product
Data Science & Deep Learning Workstations
-
A powerful data science or deep learning application is just half of the equation. Having the right high-performance system to process all that data, custom built for your workflow and location, is what makes it a complete data science solution. NextComputing offers best-in-class systems to suit your needs.
-
Product
Communication Data Logger
LE-270GR
-
LE-270GR is a Communication Data Logger, which has acceleration sensor and a connector for GPS antenna. It has logger mode with which you can records CAN/LIN communication logs in the SD/SDHC card for long hours and remote mode with which you can monitor data or GPS data on the PC at real time by connecting the analyzer with PC. It also has simulation mode with which you can repeatedly transmit CAN/LIN data which is registered in advance and selected on PC. It has galvanic-isolated two CAN transceivers and two LIN transceivers. Thus you can measure 2 channels of CAN/LIN communication lines and can simultaneously register GPS positioning data, acceleration data, and voltage data of 4 external signals.
-
Product
Multi-Protocol Wireless Application Networking System with Open, Integrated, Secure & Scalable System for Data Aggregation & Viewing
Ion
-
Jacobs’ vendor agnostic architecture was designed and implemented with the goal of an open Industrial Internet of Things (IoT) solution. ion© adapts and applies technology that enables our customers to gain efficiencies and savings, through connecting our client’s sites then collecting and displaying data in a unified interface. This provides custom insights to our clients, empowering them to ensure safety and respond quickly. The Jacobs ion© solution has been operationally deployed for over a decade and enables innovative approaches for data accuracy, data timeliness, and safety — greatly improving information flow and productivity.
-
Product
Digital Input / Output Data Acquisition (DAQ) Products
-
In many cases, we only need to know a simple status about the device we are trying to collect data from, whether something is true or false, on or off, in one position or another. In these cases, we can determine what we need to know using a digital input, or control these things by a digital output. Digital I/O can fit into many applications.
-
Product
Mutli-function Data Logger
VA600-N1/VA600-N/VA600-NH
-
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Temperature humidity data logger with USB, widely used in cold -chain transportation field HVAC refrigerator field.
-
Product
WingSALD II Data Processing Software For SALD Series
WingSALD II
-
WingSALD Framework (WFW) In pursuit of an easy-to-use user interface, we fundamentally reviewed the construction of software. This led to the development of an original user interface environment that we have called the "WingSALD Framework (WFW). " By adopting this framework, which enables greater freedom with software design, we have created a user interface that offers ease of use in a way never seen before and that meets the needs of a diverse range of applications.
-
Product
Data Acquisition & Control Systems
-
Ensuring you make the most of your testing equipment, SuperFlow offers a variety of dynamometer data acquisition and dynamometer control packages for your Engine, Chassis or Transmission dynamometer application. Contact SuperFlow to discuss which instrumentation system and related accessories are right for you, and turn your testing challenges into success.
-
Product
Co2 Data Logger
VAT820-CO2 / VAT820-CO2-VOC52
-
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Co2 data logger Indoor air quality monitor :CO2 monitor , indoor air quality including CO2,VOC temperature ,humudity.
-
Product
3-Slot Data Acquisition Mainframe With GPIB, Three 20-Channel Multiplexer Modules, And BenchVue DAQ Software
DAQ973MBX
-
The DAQ973MBX Best Multiplexer Bundle offer includes a DAQ973A three-slot data acquisition mainframe, three 20-channel DAQM901A multiplexer modules, and a BV0006B BenchVue DAQ software with a KeysightCare software support subscription. This bundle provides the following:3-slot mainframe with USB, LAN, and GPIB6.5-digit (22-bit) internal DMM60 channels of multiplexer switches6 channels of dedicated current measurements2-and 4-wire scanning300 V switching80 channels/s scanningbuilt-in thermocouple reference junctionbuilt-in signal conditioning measures thermocouples, RTDs and thermistors, AC / DC volts and current; resistance, frequency / period, diode test, and capacitance36-month node-lock BV0006B BenchVue DAQ software license with KeysightCare software support subscription
-
Product
Data Acquisition Hardware: USB
-
Ease of connection, low cost and good performance are key to our USB product range.
-
Product
Visualize & Analyze Measurement Data Software
vSignalyzer
-
vSignalyzer is a convenient tool for efficient evaluation and analysis of all types of measurement data. Its functional features range from extensive options for data visualization to manual andautomated analysis and reporting. The measurement data that is logged during network development, network analysis and ECU calibration may be read in from various file formats.
-
Product
Thermocouple Temperature Data Logger
TCTemp2000
-
The TCTemp2000 is a thermocouple temperature data logger perfect for applications requiring instant remote readings of temperature. The 8-button keypad and large LCD provide convenient access to current data and data logger setup. This data logger has an internal temperature sensor and one external input for J, K, T, E, R, S, B and N type thermocouples. Additionally, memory and battery levels, external power status, sampling and recording status are shown on the LCD.
