I²C
A slow Inter-Integrated Circuit bus protocol.
-
Product
NI-9264, 25 kS/s/ch Simultaneous, ±10 V, 16-Channel C Series Voltage Output Module
780927-02
Voltage Output Module
25 kS/s/ch Simultaneous, ±10 V, 16-Channel C Series Voltage Output Module - The NI‑9264 is a simultaneously updating analog output module that accommodates higher‑channel‑count systems. Higher density modules conserve chassis space, which leaves room for other measurement types. Each channel has its own digital‑to‑analog converter. The spring-terminal version of the NI‑9264 uses a 36‑position connector for the output channels, and each channel has a ground connection.
-
Product
3U CompactPCI 5-Port Serial Ethernet, Optional POE Card
cPCI-A3ETH
Ethernet Interface
- Follow PICMG® CompactPCI® Serial design guide- CompactPCI® Serial, 3U 4HP/8HP- 5x RJ-45 ports support up to 2.5G via Intel® i226IT Ethernet controllers- Optional PoE supported- Operating temperature: -40°C to +85°C- Designed to meet EN50155 standards
-
Product
Switch Probes (Normally Open (NO)) F88617B500G350SM
1004220
-
The Switch Probes (Normally open (NO)) F88617B500G350SM is a cutting-edge solution designed for precision applications where exact switching characteristics are critical. This model features a basic contact probe design that ensures reliability in demanding environments, with a temperature operating range from -45°C to +100°C. The F886-NO family offers a formidable combination of electrical and mechanical strengths, featuring a continuous current rating of 10A and a typical contact resistance of just 50 milliohms, making it ideal for high-efficiency applications.
-
Product
100KHz LCR Meter
MCH-2817
-
Is a high accuracy, wide measuring range impedance tester. With test frequency upto 100kHz, three test signal levels and capacity of measuring parameters such as Resistance(R), Capacitance(C), Inductance(L) and etc. It's equipped with a 240 × 128 dot , back-lighted LCD display which provides user friendly interface for measurement and operation.
-
Product
Medium-Temperature
-
Medium-temperature processing systems deliver more thermal energy than low-temp tools can provide, without crossing into the stress-inducing range of high-temp processes. Operating between 200–600°C, they create the perfect balance for enabling critical film transformations, crystallization and adhesion. Medium-temperature MBE sources can be used for virtually any application—from hot-lip SUMO sources to standard filament for thermal effusion.
-
Product
Gas Permebility Testers
-
Guangzhou Biaoji Packaging Equipment Co., Ltd.
Gas Permebility Testers used to test the gas (o2,N2,C o2, ect) transmission rate of packing materials, such as plastic film, composite film, aluminum-plated film, and so on.
-
Product
Rugged Ethernet System Supporting up to Four Independent 8000 Family Avionics Communication Modules
ES-9810/xx
-
The ES-9810/xx is a rugged ethernet system supporting up to four independent 8000 family avionics communication modules, allowing multiple different protocols to be mixed and matched in a single system. Modules available include MIL-STD-1553, MIL-STD-1760, MMSI, ARINC-429, ARINC-708, ARINC-717, Serial, Discrete and CAN bus.The ES-9810/xx is supplied with C drivers, including source code. Mating connectors and cable adapters for I/O connection can be purchased seperately.
-
Product
IEEE802.11 Ax （2.4GHz/5GHz/6GHz）+ BT5.3, M.2 2230 E Key, PCIe-USB
AIW-168
-
IEEE 802.11ax (2.4GHz/5GHz/6GHz) + BT5.3MTK 79222 Tx / 2 RxM.2 2230 E KeyInterface : PCIe - USBOperating Temperature: -10 ~ 70 °C
-
Product
Bench Power Supply, Calibrated, Adjustable, 1 Output, 0 V, 30 V, 0 A, 5 A
72-2690 CAL
-
The 72-2690 CAL from Tenma is a single channel adjustable bench top power supply. It is a digitally controlled industrial grade power supply with load for a long time. This compact design power supply has complete digital control, intelligent temperature controlled fan, low noise and low ripple. It also features knob lock function to avoid improper operation. This power supply has load regulation ≤0.01% +2mV (voltage), ≤0.1% +5mA (current) and line regulation of ≤0.01% +3mV (voltage), ≤0.1% +3mA (current). The setting accuracy (25°C ±5°C) is ≤0.5% +20mV (voltage), ≤0.5% +10mA (current).
-
Product
Basic Contact Probes (100 Mil) F56218B076G150
1001325
-
The Basic Contact Probes (100 mil) F56218B076G150, identified by order code 1001325, are highly reliable components designed for electronic connectivity in a wide range of applications. With a compact design featuring a pitch of 2.54 mm and capable of operating in temperatures between -45°C and +80°C, these probes are uniquely suited for various environmental conditions. Their efficient design ensures a continuous current rating of 5.00 A and a low typical contact resistance of just 20.00 mOhm, making them ideal for high-performance electronic circuits.
-
Product
Basic Contact Probes (100 Mil) F58835S150P300
1041857
-
The Basic Contact Probes (100 mil) F58835S150P300, identified by order code 1041857, are designed for a variety of high-performance applications. These probes feature a basic design with a pitch measurement of 2.54 mm (100 mil) and can operate effectively in a wide temperature range from -45°C to +80°C. This adaptability makes them suitable for use in challenging environments where reliability is paramount.
-
Product
Fine Pitch Probes (< 300µm) FP260D0301B014G025L072
1023003
-
The Fine Pitch Probes (FP260D0301B014G025L072) are designed for precision and reliability in various electronic applications. This specific model features a double plunger probe design that allows for a pitch of 0.35 mm, making it suitable for ultra-fine pitch connections in dense electronic configurations. It operates effectively within a temperature range from -45°C to +150°C, ensuring stability across environments. The robust construction includes beryllium copper for the plunger material and incorporates gold plating, enhancing conductivity and durability.
-
Product
Basic Contact Probe (100 Mil) F77206B250G150
1001626
-
The Basic Contact Probes (100 mil) F77206B250G150, identified by order code 1001626, are precision-engineered components designed for a wide range of applications. These probes operate efficiently within a temperature range of -45°C to +80°C, making them versatile for various industries. Featuring a pitch of 2.54 mm (100 mil), these probes are particularly suitable for automated testing and instrumentation, where reliability and accuracy are paramount.
-
Product
48W to 78W - Single Output
iEA Series
-
*Standard Eighth Brick Footprint*36-75 Vdc Input*5, 12, 15, 18 and 28 Vdc Outputs*1500 Vdc Isolation*-40 to 125 °C Operating Temperature*Constant Switching Frequency*Constant Switching Frequency
-
Product
Push Back Probes (VF4) VF483B0009G15
1009131
-
The Push Back Probes (VF4) VF483B0009G15, with order code 1009131, is engineered for high-performance applications with precision and reliability. Designed as a basic contact probe, it performs optimally under varying conditions, supported by a wide operational temperature range of -45°C to +100°C. This ensures that the probes can be utilized across diverse environments without compromising functionality. The VF4's structural integrity is bolstered by high-quality materials, employing beryllium copper for the plunger, providing excellent electrical conductivity and durability over extended use.
-
Product
NI-9218, 51.2 kS/s/ch, 2-Channel C Series Universal Analog Input Module
783362-01
Analog Input Module
51.2 kS/s/ch, 2-Channel C Series Universal Analog Input Module - The NI‑9218 is designed for multipurpose measurements. It offers built-in support for accelerometer, powered sensor, full-bridge, and voltage measurements as well as quarter-bridge, half-bridge, 60 V, and current measurements using measurement-specific adapters. Each channel is individually selectable, so you can perform different measurements on each channel. The NI‑9218 is ideal for creating universal test systems for automotive, off-highway, and data-logging systems.
-
Product
Basic Contact Probe F73339B180G150
1005279
-
The Basic Contact Probe F733 is designed to meet rigorous demands across a broad range of applications, showcasing its versatility and reliability. With a pitch of 4.00 mm (157 mil), this probe operates effectively within a temperature range of -45°C to +100°C, making it suitable for use in harsh environments. Engineered with precision in mind, the probe supports a continuous current of 10.00 A and offers a typical contact resistance of just 25.00 mOhm, ensuring optimal electrical performance.
-
Product
MIL-STD-1553 A / B Test And Simulation PMC Module
PMC-1553
PMC Module
*Dual redundant*1, 2 or 4 channels*Simultaneous bus controller, 31 remote terminals, bus monitor*Error entry and detection*FPGA based hardware architecture*Multi-level trigger for data acquisition and filtering*10 programmable, discrete I / O (up to 30V)*IRIG-B timecode encoder / decoder with free-running mode*Real-time recording and physical bus playback*Supports: C, C ++, C # and .net*Driver support: Windows, Linux, LabView Real-Time and other systems*Heat sink and / or protective coating available*Optional input / output for front panel
-
Product
Stability Testing Chamber - Double Door Model
Q20
-
Canden stability testing chamber is capable of maintaining stable temperature set points of 25°c , 30°c & 40°c and corresponding relative humidity set points of 60%RH(@25°c), 65%RH(@30°c) and 75% RH(@40°c) with exceptional precision. The chamber has a wide operating temperature range of 18°c t to 40°c maintaining a stable temperature across the entire range.
-
Product
MIL-STD-1553 A / B Test And Simulation PCI Module
PCI-C1553
-
*Dual redundant*1, 2 or 4 channels*Simultaneous bus controller, 31 remote terminals, bus monitor*Error entry and detection*FPGA based hardware architecture*Multi-level trigger for data acquisition and filtering*10 programmable, discrete I / O (up to 30V)*IRIG-B timecode encoder / decoder with free-running mode*Real-time recording and physical bus playback*Supports: C, C ++, C # and .net*Driver support: Windows, Linux, LabView Real-Time and other systems
-
Product
NI-9263, 100 kS/s/ch Simultaneous, ±10 V, 4-Channel C Series Voltage Output Module
779012-01
Voltage Output Module
100 kS/s/ch Simultaneous, ±10 V, 4-Channel C Series Voltage Output Module - The NI‑9263 is a simultaneously updating analog output module. It features overvoltage protection, short-circuit protection, low crosstalk, fast slew rate, high relative accuracy, and NIST‑traceable calibration. The NI‑9263 module includes a channel‑to‑earth ground double isolation barrier for safety and noise immunity.
-
Product
Oxygen Gas Analyzer
KM 5490
-
Kusam Electrical Industries Limited
• As it uses a high quality oxygen sensor, it is very precise and its performance is stable.• It uses the advance technology design and has multiple functions.• With highlight backlight display and acousto-optic alarming, it is easily configured.• The in built temperature compensation makes the meter measure the correct value of oxygen in the environment temperature of -10 ~ 40�C.• As its case is ergonomically designed, it looks elegant, and is easy to carry.
-
Product
Thermalert Monitoring Thermometer
TH-5
-
The TH-5 is one of our most economical precision thermometers in the Physitemp product line. The TH-5 offers the same high accuracy (0.1°C ±1 digit) and resolution as all our other thermometers, but with a narrow temperature range. The TH-5 is ideally suited for either a laboratory or hospital setting where continuous temperature readings within the physiological range are sufficient.
-
Product
Basic Threaded Probes F17512B078G150
1017292
-
The F17512B078G150 is a highly versatile Basic Threaded Probe, part of the F175 and F176 series, designed for a wide range of applications requiring precision and reliability. This probe features a compact design with a total length of 35.90 mm and is capable of operating in extreme temperatures, ranging from -45°C to +100°C. With a pitch of 1.90 mm, it offers a fine balance of sensitivity and durability, making it suitable for various contact testing scenarios.
-
Product
LCR METER/Transformer Test
-
A type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component.
-
Product
Basic Threaded Probe F73217B150G150
1001463
-
The F73217B150G150 is a Basic Contact Probe designed for versatile applications, excelling in precision and reliability. This probe operates effectively within a temperature range of -45°C to +100°C, making it suitable for a wide array of environments. Its 2.54 mm pitch ensures compatibility with various setups, while the robust construction guarantees durability and consistent performance throughout its lifespan.
-
Product
Modular Open Systems Approach (MOSA) Solutions
-
NAI’s Modular Open Systems Approach (MOSA) solutions provide customers with pre-configured, pre-validated, rugged military embedded solutions that save development time and cost while reducing program risk. These Flexible, Adaptable, Configurable, Modular and Expandable Systems Eliminate custom designs and redesigns by taking advantage of NAI’s Configurable Open Systems Architecture (COSA). NAI's full suite of MOSA Solutions are ARM® Cortex®-A53 processor-based and are ruggedized to withstand -40° C to +71° C and qualified to MIL-STD-1275D & MIL-STD-704A with 50 ms holdup (VITA 62 power supply); MIL-STD-461F and MIL-STD-810G.
-
Product
MIL-STD-1553 A / B Test And Simulation PC / 104+ Module
PC104p-1553
-
*Dual redundant*1, 2, 4 or 8 channels*Simultaneous bus controller, 31 remote terminals, bus monitor*Error entry and detection*FPGA based hardware architecture*Multi-level trigger for data acquisition and filtering*10 programmable, discrete I / O*IRIG-B timecode encoder / decoder with free-running mode*Real-time recording and physical bus playback*Supports: C, C ++, C # and .net*Driver support: Windows, Linux, LabView Real-Time and other systems*Supports ARINC429 and ARINC 664 operations
-
Product
High Temperature Chucks
-
High temperature electrostatic chucks are available for the ranges -60 to +400 deg. C, and for 350 to 600 deg. C. Different materials and constructions are used in these two ranges.
-
Product
Basic Threaded Probes (F731) F73111B060G100E13
1031590
-
The Basic Threaded Probes (F731) F73111B060G100E13, with order code 1031590, are designed for high-performance in various demanding applications. Featuring a compact design, the probe has a pitch of 2.40 mm, making it well-suited for precise measurements and interactions. This model operates effectively within a temperature range of -45°C to +100°C, ensuring its reliability in extreme conditions.
