Product

Magnetic Field Sensors

SpinTJ

-

Micro Magnetics

SpinTJ - Micro Magnetics

The SpinTJ magnetic sensor family builds upon Micro Magnetics? in-house expertise developing low-field magnetic tunnel junction sensor products. Based on our proprietary fabrication processes, we have developed patented recipes for fabricating macroscopic, micron-scale, and submicron MTJ field sensors.

Product

Magnetic Field Tester

MS-440

-

MAGMESS Magnet-Messtechnik

MS-440 - MAGMESS Magnet-Messtechnik

This device recognises fast and simply magnetic fields generated by electric reels and permanent  magnets.

Product

Magnetic Field Sensors

-

Balluff GmbH

Balluff GmbH

Our cylinder sensors for pull rod cylinders can be integrated into many applications. They are mounted with mounting brackets on cylinders with tie rods and DUO rails. The concept is suitable for the most common types of cylinders with any piston diameter. Features: contact-free detection of the piston position, tie rod Ø up to 17 mm, reliable switching behavior, wear-free, resistant to dirt, secure grip, easy installation.

Product

Magnetic Field Sensor

-

Vernier Software & Technology, LLC

Vernier Software & Technology, LLC

The Magnetic Field Sensor can be used to study the field around permanent magnets, coils, and electrical devices. It features a rotating sensor tip to measure both transverse and longitudinal magnetic fields.

Product

Field Meter

AP 01 HD

-

Unaohm Start S.r.l.

AP 01 HD - Unaohm Start S.r.l.

The AP01-HD is a field meter with total coverage of the terrestrial TV bands, cable TV (CATV), 1st IF satellite and, if the relative option is inserted, the return channel 5-65 MHz.

Product

Magnetic Field and Permeability Measurement

MAGNETOSCOP® 1.070

-

Foerster Instruments, Incorporated

MAGNETOSCOP® 1.070 - Foerster Instruments, Incorporated

The MAGNETOSCOP 1.070 is a portable magnetometer system with microprocessor and probes for measuring the magnetic flux density as an absolute or differential value (gradient). It has a USB port for simple data transfer and an SD card for saving measurement data and parameters. The measuring system also facilitates the recognition and saving of peak values and the adjustment of thresholds for limit values. The unit can be used for series and individual measurements. The data can be easily analyzed and documented with the PC software included in the scope of delivery. The MAGNETOSCOP 1.070 thus facilitates the portable and fast measurement of the relative permeability within the scope of the quality control of stainless steel and low-permeable (non-magnetic) alloys as well as the localization of ferrite enclosures. Changes in material (sulfidation, degradation of lamination, structural changes) can also be proven thanks to permeability comparative measurements.

Product

High field Superconducting Magnets

-

Cryogenic Ltd.

Cryogenic Ltd.

Cryogenic Ltd manufactures a wide range of superconducting magnets for research and industrial purposes. A range of standard solenoids between 1 to 22 Tesla is produced, and in addition split pair solenoids in the range 1 to 14 Tesla, with a typical central field homogeneity of 0.1%.

Product

Field Probe for Electric & Magnetic Field Measurement

WP400-3

-

Wavecontrol, S.L.

WP400-3 - Wavecontrol, S.L.

Wavecontrol presents a new and unique field probe for the measurement of electric and magnetic fields that integrates both E & H sensors within dimensions of only 3 cm². Which makes it unique is that Wavecontrol has managed to add an E field sensor in a basic structure of a classical 3 cm² field probe. It has been possible, therefore, to obtain a 3 cm² field probe without compromising the capability of assessing E and H fields of its 100 cm² big sister, the recognized and successful WP400.

Product

Probes, Magnetic Field

EM-6882 | 20 MHz To 230 MHz

-

Electro-Metrics Corp.

EM-6882 | 20 MHz To 230 MHz - Electro-Metrics Corp.

The EM-6880, EM-6881 and EM-6882 Magnetic Field Probes operate in conjunction with any 50 ohm input impedance receivers.

Product

Field meters

-

Schwarzbeck Mess Elektronik

Schwarzbeck Mess Elektronik

Small, lightweight and low priced non frequency selective Efield meter. It can be used for relatively high field strengths e.g. to observe the field in a TEM cell or a strip line.

Product

Single Axis AC Magnetic Field Sensor

MGC-1

-

Macintyre Electronic Design Associa

MGC-1 - Macintyre Electronic Design Associa

The MGC-1 is a low noise high sensitivity single axis AC magnetic field sensor used for the measurement of audio frequency fields. Because of its innovative design, the MGC-1 amplitude response is insensitive to the frequency of the field over its 5 Hz to 10 kHz frequency band. Accuracy at 1 kHz is ±1%, and the amplitude response stays within 2 dB peak-to-peak over the bandwidth.

Product

Magnetic Field Measurement Systems

-

AET Associates, Inc.

AET Associates, Inc.

The magnetic field probe performs non-contact current measurements and can be used for real traces. The probe of higher resolution enables pinpoint measurements.

Product

Field Strength Meter

FIM-71 VHF

-

Potomac Instruments, Inc.

FIM-71 VHF - Potomac Instruments, Inc.

The Model FIM-71 is a portable, laboratory quality Field Strength Meter designed for rigorous field applications. Combining a calibrated half-wave dipole antenna and a highly accurate tuned voltmeter with a range of 140 dB, the FIM-71 is suitable for practically all types of RF emission measurements in the 45 MHz to 225 MHz spectrum. The operator can switch select wide or narrow bandwidth, peak or average value of TV or pulse modulated signals, AM or FM demodulation, and a meter dynamic range of either 20 dB or 60 dB. A dc analog output voltage, proportional to the meter indication, is provided for driving a chart recorder. A leveled output from the calibrating oscillator is available for measuring cable insertion loss, filter response, amplifier gain, and other signal ratio measurements. The 4-1/2 inch, taut band, mirrored scale meter is calibrated in volts and dB for precise measurements in field or laboratory environments.

Product

Single Axis AC Magnetic Field Sensor

MGCH-2

-

Macintyre Electronic Design Associa

MGCH-2 - Macintyre Electronic Design Associa

The MGCH-2 is the lowest noise, highest sensitivity single axis AC magnetic field sensor available for the measurement of sub radio frequency fields. Because of its innovative design, the MGCH-2 amplitude response is insensitive to the frequency of the field over its 10 Hz to 100 kHz frequency band. Accuracy at 10 kHz is 0.1 dB, and the amplitude response stays within 2 dB peak-to-peak over the bandwidth.

Product

Field Intensity Meter

LM870-W

-

Sichuan Jiuzhou Electronic Technology Co.,Ltd

LM870-W - Sichuan Jiuzhou Electronic Technology Co.,Ltd

* Trunk-line AC voltage, V/A, C/N and TILT measurable* Automatic over-voltage shut-off protection* AC/DC optional (Ni-H/Li storage battery inside)* Full-digital key-board operation, direct freq. & channel input* Automatic scanning, Automatic channel-filtering, Automatic error-operation amending* All standard channels and subjoin channels pre-set inside* New channel-table setting according to user's special requirement* Spectrum displaying* English/Chinese operation interface* Audio output (speaker set-in)

Product

Digital Static Field Meter

Model 715B

-

Prostat Corporation

Model 715B - Prostat Corporation

- Assess electrostatic fields or charge on objects- Measures up to ±19.99 kV at a distance of 1 inch- Accuracy of <±5% in both normal and ionized environments- Uses a chopper stabilized sensor- LED ranging lights for positioning the meter at the right distance- Zero function allows the display to be adjusted to zero (0)- Hold feature to lock the reading on the display- Low battery indicator on the display- 1-year limited warranty

Product

Broadband Field Meter

NBM-520

-

Narda Safety Test Solutions

NBM-520 - Narda Safety Test Solutions

*Intelligent probe interface detects the probe parameters*Fully automatic zero point adjustment*PC software for convenient data management

Product

Magnetic Field Cancelling System

MK-1

-

Stefan Mayer Instruments

MK-1 - Stefan Mayer Instruments

Single axis magnetic field cancelling system for MRI scanners and biomagnetic applications. This system is used when the magnetic field sensor cannot be placed within the shielded volume. For example, in MRI applications the sensor is usually installed outside of the shielding room because of the MRI scanner's high fringe field.

Product

Electrostatic Field Meter Kit

PFK-100B

-

Prostat Corporation

PFK-100B - Prostat Corporation

- Measure range & polarity of electrostatic fields in 1 volt or 10 volts increments- Charges from zero to over 1000 volts in less than 5 seconds- Balance Ionizers per ANSI/ESD SP3.3 Periodic Verification- Measure Ionizer Decay time as per ANSI/ESD S3.1 and ANSI/ESD SP3.3.- Measure Body Voltage Generation and Decay- Use with a datalogger to record measurements & create reports- Compatible with the Autoanalysis System- Accuracy of ± 5%- Battery Operated

Product

Damped Oscillatory Magnetic Field Immunity Tester

DOMF61000-10

-

Lisun Electronics Inc.

DOMF61000-10 - Lisun Electronics Inc.

DOMF61000-10 damped oscillatory magnetic field immunity test system included damped oscillating wave generator and single ring coil, it’s designed for to do damping oscillation magnetic field immunity test and fully meet IEC 61000-4-10, EN61000-4-10 and GB/T 17626.10 standards requirement.

Product

Field Meters

DG-OHM Compact

-

Unaohm Start S.r.l.

DG-OHM Compact - Unaohm Start S.r.l.

The DG-OHM Compact is the UNAOHM model that best responds to installers' requests regarding size, weight, ease of use, all of which, however, faithfully maintaining UNAOHM performance.

Product

Magnetic Field And Permeability Measurement

MAGNETOMAT 1.790

-

Foerster Instruments, Incorporated

MAGNETOMAT 1.790 - Foerster Instruments, Incorporated

The MAGNETOMAT 1.790 is a measuring system for the precision detection of magnetic flux density and relative permeability. The MAGNETOMAT software is used for displaying the measured values and saving and exporting data. The wide range of probes facilitates optimal adjustment to the conditions of the application, such as the measurement of relative permeability within the scope of the quality control of stainless steel and low-permeable (non-magnetic) alloys. Further applications include the long-term monitoring of the magnetic environment, e.g. prior to installing magnetically sensitive devices, and the localization of ferrite enclosures in stainless steel and NE materials. Changes in material (sulfidation, degradation of lamination, structural changes) can also be proven thanks to permeability comparative measurements.

Product

Magnetic Susceptibility Meter for Multi-Layer Survey

MULTI KAPPA

-

GF Instruments, s.r.o.

MULTI KAPPA - GF Instruments, s.r.o.

Multi Kappa instrument serves for fast field survey allowing both spot measurement and mapping by means of several probes. Together with GF Instruments traditional pocket magnetic susceptibility meters cover wide range of demands for accurate susceptibility measurement on ground surface, outcrops and samples of rock and soil. geological survey, archaeology, agriculture and forestry, raw material prospecting, mineralogy, sedimentology, detection of metallic objects, UXO survey.

Product

Complete Field Meter Site Testing Solution

7 Series

-

Powermetrix Systems

7 Series - Powermetrix Systems

We raised the industry standard by introducing the PowerMaster 7 Series as a true 3-phase analyzing reference standard with internal 3-phase current and voltage source capability. The innovative design of the PowerMaster® 7 Series allows utilities to fully test a metering installation with one piece of equipment. Customer load meter testing, phantom load meter testing, CT burden and ratio testing, CT de-magnetization, PT ratio testing, and transducer testing can all be performed with one solution. In addition, vector diagrams, voltage and current waveforms, and harmonics data up to the 100th harmonic can all be analyzed to complete a true wiring verification.