Product

VXI Front Panel Kits - Blank Or Custom Panels

-

ICS Electronics

ICS Electronics

* Single-slot wide front panel is a bend resistant, aluminum extrusion with mounting holes and ejector slots.* Ejector handles have removable face plates for labeling the module.* Kit includes ejector handles, mounting hardware, one blank face plate, one face plate with VXI logo, and assembly screws.* Layout drawings and CAD design aids available for adding additional cutouts to the blank panels.

Product

Transformer Winding Resistance Meters

RMO TT Series

-

Amperis sl

RMO TT Series - Amperis sl

The Tap Changer Analyzer & Winding Ohmmeter of the RMO-TT series is designed for winding resistance measurement of inductive objects, and for a tap changer analysis. The RMO-TT series is based on the state of the art technology, using the most advanced switch mode technology available today. The RMO-TT instruments are accurate (0,1%), powerful (up to 100 A) and still portable. The Instruments generate a true DC ripple free current with automatically regulated measurement and discharging circuit. RMO-TT instruments can perform a simple, quick and reliable transformer on-load tap changer condition assessment. This series of instruments enable measurements of a winding resistance in every tap position, current ripple values (percentage of a current drop during a tap change) and transition times during the tap changes. Problems with a connection, contacts, and selector/diverter switch operation (tap change with interruption) can be detected with these measurements.

Product

Decay Accessory Set

PGB-745

-

Prostat Corporation

PGB-745 - Prostat Corporation

- Designed for measuring charge movement and decay time of ESD controlled materials- The set consists of two stainless steel electrodes and two very high resistance test leads selected for this application- The high resistance leads minimize leakage during the test cycle and are equipped with male banana plugs

Product

NFPA 701-1 Flammability Tester

TF320

-

TESTEX Testing Equipment Systems Ltd.

TF320 - TESTEX Testing Equipment Systems Ltd.

NFPA 701-1 Flammability Tester, to determine the ignition resistance properties of draperies and other hanging fabrics according to test method NFPA 701#1, and it is suitable for single-layer or multi-layer fabrics, but not suitable for fabrics with density larger than 700g/m2 (21oz/yd2).

Product

Battery Tester

BAT-500

-

Amprobe Test Tools

BAT-500 - Amprobe Test Tools

Amprobe BAT-500 Battery Tester quickly and accurately tests batteries without taking the batteries off-line. This Battery Tester features a comparator function with pass/fail indication, and speed testing of batteries up to 500 Ah. Amprobe BAT-500 Battery Tester, compact and light weight, simultaneously measures battery resistance and voltage up to 40 V.

Product

ZZ Power Booster 1200V/3000V

ZZ Booster-Transmitter

-

ZZ Resistivity Imaging Pty. Ltd.

ZZ Booster-Transmitter - ZZ Resistivity Imaging Pty. Ltd.

*3,000W output power in 2 adjustable voltage ranges ( 400V/7.5A, 1,200V/2.5A), the FlashRES booster transmitter is particular useful for surveys in high resistive areas or IP surveys.*When the FlashRES booster transmitter is connected FlashRES-UNIVERSAL, for each current injection, the system could collect 61 voltage measurement, this greatly increases the data collection speed.*Uses two standard 12V batteries connect in series as input power source*The FlashRES booster transmitter is designed for heavy duty usage, the instrument is shock, water and dust proof.*Light-weight and easily mobilised

Product

Rubber And Plastic Test Equipment Series

-

Haida Equipment Co., Ltd.

Haida Equipment Co., Ltd.

Rubber and Plastic Test Equipment is used to detect a variety of rubber, plastics tensile strength, abrasion resistance, flexibility, puncture resistance, the melting point of resistance, flexibility, mobility and other performance capability...

Product

Flame & Other Plastics Testing

-

Educated Design & Development, Inc.

Educated Design & Development, Inc.

Plastics are tested to determine their flammability burning characteristics (Flame rating), their ignition potential due to thermal and electrical sources, their resistance to electrical tracking, and other electrical characteristics. The specific test required on a plastic depends on the type of component or end-use product, as well as the environment in which the plastic is used. This test equipment meets most UL, CSA, IEC, EN and other international safety standards.

Product

Resistance Meter - Portable, Precision Resistance Measurement from 0.10 to 1.00 x 10^12 Ohms

PRS-812B

-

Prostat Corporation

PRS-812B - Prostat Corporation

- Wide Range Resistance: 0.10 Ω to 1.00x1012 Ω- Accuracy of ±2% from 1.00 Ω to 9.99x1010Ω- Constant Test voltages 10V and 100V for specification measurements to meet international and domestic ESD measurement standards- Auto Resistance Range Control- Auto Test Voltage Control- Uses a Rechargeable Li-ion Battery Pack- Takes Approximately 8,000 Measurements on a Single Charge (480 hours typical)- 120 Data Set Internal Memory- Uses Standard USB Cable for Charging- Charges in 2 Hours- 2-year Limited Warranty on Main Instrument

Product

L Terminal Shunt Resistor

LT

-

RARA Electronics Corporation

LT - RARA Electronics Corporation

LT shunts are highly accurate manganin resistance D.C. shunts. These shunts are designed for standard current measurement of electric equipment.

Product

AC Ground Bond Tester

448

-

SCI

448 - SCI

Our 448 model is a 4-in-1 tester with 500VA AC Hipot, DC Hipot, Insulation Resistance and Ground Bond testing capabilities. The 448 is capable of a 500VA AC Hipot output to comply with 100mA leakage current test compliance requirements. This tester features a simple design and easy-to-use interface, reducing setup time and increasing production-line throughput for your application.

Product

Acceleration Simulation Mode (ASM) Roller Set

ASM-P | VP 230046

-

Maschinenbau Haldenwang GmbH & Co. KG.

ASM-P | VP 230046 - Maschinenbau Haldenwang GmbH & Co. KG.

The ASM-P roller set is used in test centres and is suitable for vehicles with a single driven axle. It was designed for the exact measurement of the exhaust gas behaviour of vehicles during their transient emission test and permits a driving resistance simulation for the exhaust gas tests ASM-5015 and ASM-2525 (Acceleration Simulation Mode) in accordance with the specifications BAR '97. The increased tractive force of its eddy current brake means that the ASM-P is also suitable for power measurements at constant speed and constant tractive force.

Product

250 MHz Passive Probe for HDO4000, 10:1, 10 MOhm

PP017-1

-

Teledyne LeCroy

PP017-1 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Product

Battery Monitoring System

BDS-Pro

-

Eagle Eye Power Solutions

BDS-Pro - Eagle Eye Power Solutions

Eagle Eye's BDS-Pro Battery Monitoring System is designed to measure the aging status of up to 24 jars (or 24 cells) by measuring and recording: string voltage and current, as well as jar/cell voltage, internal resistance, connection resistance and temperature. The BDS-Pro Battery Monitoring Solution is the most accurate, user-friendly and economic solution for monitoring 24 jars (or 24 cells) systems using 1.0-16V batteries. Although the BDS-Pro is utilized in many industries, it is most frequently used in 24 cell, 48Vdc applications.

Product

Evaporation Gauges

-

Campbell Scientific, Inc.

Campbell Scientific, Inc.

Evaporation gauges determine the evaporation rate by measuring the changing water level in an evaporation pan. The gauges consist of a float, pulley, and counterweight attached to a potentiometer mounted through a gear assembly in weatherproof housing. The evaporation gauges produce a resistance output that dataloggers can measure.

Product

Impulse Semiconductor High Current Integrated

Transmission Line Pulse Test System

-

Impulse Semiconductor Inc.

Transmission Line Pulse Test System - Impulse Semiconductor Inc.

The Impulse Semiconductor High Current Transmission Line Pulse (TLP) test system is the tool of choice for extracting ESD parameters for transient protection devices in a package, or at wafer level. With accuracy better than 100 milliohms at 40 amps peak current, the Impulse high current TLP is specially tailored to the needs of today's ESD device designers who must accurately measure low values dynamic resistance irrespective of breakdown voltage.

Product

Step Probes (F731SP) F73111B0030G100SP

1032523

-

FEINMETALL GmbH

1032523 - FEINMETALL GmbH

The Step Probes (F731SP) F73111B0030G100SP is designed to offer exceptional precision and reliability for various applications. With a pitch of 2.40 mm and an operational temperature range spanning from -45°C to +100°C, these probes are suitable for a wide variety of environments, ensuring optimal performance even under extreme conditions. This model boasts a continuous current rating of 5.00 A and typical contact resistance of just 20 mOhms, making it an ideal choice for signaling and power applications where minimal resistance is crucial.

Product

Resistivity Meter for Concrete

Ohmcorr Test System™

-

James Instruments Inc.

Ohmcorr Test System™ - James Instruments Inc.

OhmCorr has two probes spaced 1.97" (5cm) apart which are placed in holes drilled to a depth of 3/8th" (8mm) and filled with conductive gel. The direct digital read-out of resistivity is displayed on the LCD when the control switch is activated. OhmCorr and CorMap, when used together, provide an economical and sound diagnostic system of corrosion in reinforced concrete.

Product

IP67 Testing

-

Cincinnati Test Systems

Cincinnati Test Systems

IP67 is an electronics and sealed device attribute requirement with a physical no-water ingress testing process used to determine whether components meet the requirements needed to receive an IP (ingress protection) rating. Devices with this internationally recognized rating resist exposure to dust and withstand up to 30 minutes of submersion in water up to 40 inches (1 meter) in depth. Products assigned an IP67 rating are typically used in outdoor applications or other environments requiring resistance to dust, moisture, and water submersion.