Product

Frame Grabbers

Grablink Series

-

Euresys Inc.

Grablink Series - Euresys Inc.

The Grablink frame grabber controls the camera scanning rate based on the signals received from a motion encoder. When the parts move faster, the acquisition line rate of the camera increases. When the parts move slower, the acquisition line rate of the camera decreases.

Product

Open Frame 6U 34HP Chassis

-

Kontron

Kontron

An open-frame solution for the open-minded engineer. With moveable rear profiles (up to 2.5mm,) 3U and 6U backplane compatibility options, air or conduction cooling options and the ease of fast and simple backplane interchangeability for fluid transition between VITA and PICMG bus architectures, the Hartmann Open Frame Chassis solution is the tool for customers who need versatility, accessibility and longevity.

Product

PCI/104-Express 4-Channel Frame Grabber with Audio Capture

911

-

Sensoray Co., Inc

911 - Sensoray Co., Inc

4 input channels: 4 NTSC/PAL composite/S-Video + 4 stereo audio Simultaneously captures full frame rate video on all channels Captures raw RGB or YUV video 4 general-purpose digital I/Os configurable as inputs or outputs Supports both stack-up and stack-down

Product

Login Digital Epstein Tester Model

Model EP400

-

Gopal Electronics

Model EP400 - Gopal Electronics

Digital Epstein Tester EP-400 is designed to measure AC magnetic properties of flat rolled magnetic materials at high frequency by using Watt-meter, Ammeter, Voltmeter and Source. Epstein bridge test method is a fundamental method for evaluating the magnetic performance of flat-rolled magnetic materials in either sheared or stress relief annealed condition. This test method is suitable for design, specification acceptance, service evaluation, and research and development.

Product

Multi-Interface Frame Grabber

Xtium 2 CLHS PX8 LC

-

Teledyne DALSA

Xtium 2 CLHS PX8 LC - Teledyne DALSA

The Xtium™ 2 CLHS PX8 features CameraLink HS standard on the PCI Express™ Gen 3.0 platform. This single cable, single slot solution supports up to 4-CLHS lanes, each operating at 10.3 Gbits/s, to acquire images at up to 5.0 GBytes/s and transfer them using PCIe x8 slots to the host memory. The Xtium2-CLHS supports Active Optical Cable (AOC) to extend the cable length beyond 100 meters. Built-in data-forwarding and multi-board sync capabilities deliver a platform for distributed processing for high-speed, computational intensive machine vision applications.

Product

MIPI M-PHY V5.0 Receiver Test Software (Frame Generator)

N5991MM5E

-

Keysight Technologies

N5991MM5E - Keysight Technologies

Generate MIPI M-PHY 5.0 sequences and signaling at HS-GEAR5 and lower speeds, for debugging, troubleshooting, and conformance test purposes, using the N5991MM5E Frame Generator software, for the M8040A BERT platform.

Product

Frame Grabber

R3-DIF

-

BitFlow, Inc.

R3-DIF - BitFlow, Inc.

The R3 frame grabber family has been designed to simplify the task of interfacing today's digital cameras to a wide array of imaging applications. The R3-DIF can interface to almost every LVDS camera manufactured (up to 32 bits).

Product

MBoS Support Frame For NI PXIe-1084 Chassis

95-901-103

-

Pickering Interfaces Inc.

95-901-103 - Pickering Interfaces Inc.

Frame assembly for mounting an NI PXIe-1084 chassis in the Modular Breakout System.

Product

PCI Express Image Acquisition Frame Grabber

Xcelera-HS PX8

-

Teledyne DALSA

Xcelera-HS PX8 - Teledyne DALSA

The Xcelera-HS PX8 has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the host, providing traceability when errors do occur and permitting recovery from those errors.

Product

Frame Grabber & Vision I/O Card

-

Axiomtek Co., Ltd.

Axiomtek Co., Ltd.

Axiomtek develops a full spectrum of machine vision cards to help customers accelerating their design and reducing development costs.

Product

Low-cost, Full-Featured Video Frame Grabber Board

Aexeon

-

dPict Imaging, Inc.

Aexeon - dPict Imaging, Inc.

DescriptionAexeon is a low-cost, full-featured video frame grabber board for analog camera solutions. Aexeon accepts multiple composite, S-Video, or component video inputs in both NTSC and PAL formats and digitizes in both square pixel and CCIR-601 resolutions. With on-board processing, complete camera control, and video output, Aexeon is the perfect product for analog camera OEM solutions.

Product

Capacitance Standard Frame

AH 1100

-

Andeen-Hagerling, Inc.

AH 1100 - Andeen-Hagerling, Inc.

The AH 1100 capacitance standard frame containing from one to four AH 11A fused-silica capacitance standards provides reference capacitors of unexcelled stability. The inherent stability of this system when subjected to mechanical or thermal shock makes it the ideal transfer standard for capacitance. The built-in precision temperature controllers make it a simple, reliable system to use.

Product

2-port/4-port PCI Express GigE Frame Grabber Card

AX92320

-

Axiomtek Co., Ltd.

AX92320 - Axiomtek Co., Ltd.

The AX92320 supports PCI Express x4 lane, two or four independent Gigabit 802.3at (PoE, Power-over-Ethernet) compliant Ethernet ports and GigE Vision camera compliance. The PCI Express x4 frame grabber can provide up to 30 watts at 54 VDC power to port which allows power to be supplied to connected PoE-based devices, such as GigE Vision cameras in machine vision systems. The intelligent GigE Vision card also supports IEEE 1588 (precise time protocol), enabling synchronization with multi-camera acquisition. Combining IEEE 1588 and PoE function, the card utilizes a single Ethernet cable for power, data, and synchronization. Furthermore, it supports jumbo frames up to 9.5KB. The AX92320 is ideal for PoE applications such as automated optical inspection (AOI), factory automation, and PC-based surveillance systems.

Product

MBoS Support Frame For 40-924-001 Or 60-102C-001 Chassis

95-901-005

-

Pickering Interfaces Inc.

95-901-005 - Pickering Interfaces Inc.

Frame assembly for mounting a Pickering 40-924-001 PXI or 60-102C-001 LXI chassis in the Modular Breakout System.

Product

USB MPEG Frame Grabber

2251

-

Sensoray Co., Inc

2251 - Sensoray Co., Inc

MPEG1/2/4 and JPEG capture to USB from an analog video source at D1 resolution Compact form factor for embedded designs 30 fps NTSC, 25 fps PAL Synchronous audio capture from a line level (stereo) input Multiple region motion detection Text overlay (OSD) SDK works with multiple units

Product

FireBird CoaXPress Frame Grabber (Quad CXP-6)

AS-FBD-4XCXP6-2PE8

-

Active Silicon

AS-FBD-4XCXP6-2PE8 - Active Silicon

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

MBoS Support Frame For NI PXIe-1092 Chassis

95-901-105

-

Pickering Interfaces Inc.

95-901-105 - Pickering Interfaces Inc.

Frame assembly for mounting an NI PXIe-1092 chassis in the Modular Breakout System.

Product

Multi-Interface Frame Grabber

Xtium2 CLHS PX8

-

Teledyne DALSA

Xtium2 CLHS PX8 - Teledyne DALSA

Building on the field proven Teledyne DALSA’s Xtium family of frame grabbers, the Xtium™ 2 CLHS PX8 features CameraLink HS standard on the PCI Express™ Gen 3.0 platform. The Xtium2-CLHS supports Active Optical Cable (AOC) and industry standard CX4 cables. This single cable, single slot solution supports up to 7-CLHS lanes, each operating at 10.3 Gbits/s, to acquire images at up to 8.4 GBytes/s and transfer them using PCIe x8 slots to the host memory.

Product

Software Application for Building & Editing Ethernet Frame Lists

Frame Builder

-

Avionics Interface Technologies

Frame Builder - Avionics Interface Technologies

The Frame Builder application is an easy to use GUI used to create and edit Ethernet frame lists to be transmitted using the AIT Dual Channel Ethernet (DCE) and 10G Ethernet Instruments.

Product

High-Throughput Film Frame Handler

MCT FH-1200

-

Cohu, Inc.

MCT FH-1200 - Cohu, Inc.

FH-1200™ film frame test handler is designed to handle leadless devices mounted on film frame, such as QFN, DFN, WLCSP, BGA, µBGA and eWLB packages. The FH-1200 enables high parallelism testing of post-saw IC devices at ambient temperature. It can accommodate 200 mm and 300 mm wafer rings and custom shapes onto which multiple strips can be mounted. No change kits are required regardless of package size (if same frame is used).

Product

FireBird CoaXPress Frame Grabber (Dual CXP-6)

AS-FBD-2XCXP6-2PE8

-

Active Silicon

AS-FBD-2XCXP6-2PE8 - Active Silicon

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

Frame Grabbers

-

Advantech Co. Ltd.

Advantech Co. Ltd.

Frame Grabber designed for connecting industrial cameras in machine vision, factory automation, and medical applications.

Product

Pylon ITA Mount Linear Testfixture Cassette and ITA Frame Not Included, UUT 306 x 248 mm

MG-02 VGR12

-

MG Products

MG-02 VGR12 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with aluminum backpanel for a Genrad VGR12 Pylon frame• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 306 x 248 mm (wxd)• Outer dimensions: 470 x 490 x 100 x 170 mm (wxdxh1xh2)• Designed for changeable cassette