Epstein Frame
measures properties of magnetic materials. Also known as: Epstein Square
See Also: Epstein
-
Product
Frame Grabber
311
-
High frame rate using the PC/104+ busColor or monochrome: PAL, SECAM, NTSC, RS-170 CCIR compatibleFour composite video inputs or three composite and one S-videoEight TTL I/O lines for camera controlProgrammable AGC, hue, contrast, saturationOptional enhanced SDK for Windows 98/2000/NT/XP/CEOptional Linux and QNX drivers
-
Product
MIPI M-PHY V5.0 Receiver Test Software (Frame Generator)
N5991MM5E
-
Generate MIPI M-PHY 5.0 sequences and signaling at HS-GEAR5 and lower speeds, for debugging, troubleshooting, and conformance test purposes, using the N5991MM5E Frame Generator software, for the M8040A BERT platform.
-
Product
Phoenix LVDS Frame Grabber (PE1)
AS-PHX-D36-PE1
-
Phoenix-D36 is a PCI Express board for the acquisition of digital data from a variety of sources, including digital frame capture and line scan cameras. It has 36 bits used for input data, with 4-bits for control. This provides support for a single 12 bit RGB or 32 bit mono data source, including multi-tap cameras. The 4-bit control inputs are dedicated as Frame Enable, Line Enable, Data Enable and Pixel Clock.
-
Product
19" 1280 X 1024, VGA/DVI Interface, Ultra Slim Touch Open Frame Monitor
IDS-3119
-
19" 1280 x 1024 SXGA panel with LED backlight for 20% power saving and environmental protection. 0~ 45° C operating temperature support, 5-wires resistive touchscreen solution, Combo touch interface of RS-232 and USB.
-
Product
Film Frame Test Handler
4170-IH
-
High throughput ・High withstand load, and high thrust table ・Expansion of the strip attachment area ：260(L) X 300(W) [Withinφ300mm for WLCSP]・LOT control by barcode/2D code reader ・Easy device type exchange only test socket and display screen setting・Auto-cleaning function unit is installed to clean the socket at any desired timing.・8/12 inches ring conversion ・S2/S8 regulation compliance・SEMI G85 compliance・SECS/GEM compliance
-
Product
Open Frame Panel PC
-
Industrial Panel PC is a full-featured embedded system with a variety of onboard I/O options. It’s available in multi-core options to fit a variety of application requirements, offering scalable performance options including single, dual or quad-core processing.
-
Product
Phoenix 3U cPCI Camera Link Frame Grabber
AS-PHX-D48CL-3CPCI32-B-CR
-
Phoenix-D48CL is a 3U CompactPCI board for the acquisition of digital data from a variety of Camera Link sources, including digital frame capture and linescan cameras. It supports all the formats of the Base and Medium configurations, i.e. single 8- to 16-bit data, through 12-bit RGB, to four tap 12-bit sources, as well as dual Base configuration, i.e. acquisition from two asynchronous Base cameras.
-
Product
4-Ports PCI Express PoE+ GigE Vision Frame Grab
PCIE-1674E-BE
-
Intel I350 1GbE Ethernet ControllerPCI Express Gen2 x4 compliantCompliance with IEEE 802.3at-2009 (PoE+), up to 2 ports delivers up to 25.4 W of power via power jet supply and protect by recoverable eFusePowered Device (PD) auto detection and classificationSupports IEEE 802.3u Auto-NegotiationSupports Jumbo frame (9,500 byte) and link aggregation
-
Product
Frame Grabbers
-
Active Silicon designs and manufactures a wide range of acquisition solutions based around leading-edge hardware technology and versatile software toolkits. The range includes acquisition solutions for CoaXPress, Camera Link, HD-SDI, SDI and LVDS in different form factors. Operating system support includes 32/64-bit versions of Windows 7/Vista/XP, Linux, QNX, and Mac OS X.
-
Product
4-Port PCI Express CoaxPress 6 Frame Grabber
PCIE-1144-AE
-
Half-Size PCI Express Board Gen 2.0 x8CXP speeds range from 1.250 to 6.250 Gb/SSupports 1 to 4 CXP-6 camerasSupports power for all cameras with SafePower (up to 13 Watts per link)Supports NVIDIA GPUDirectFull GenICam support for control and captureSupports quadrature encoders
-
Product
Frame Grabbers
Coaxlink Series
-
Ultimate in performance with superior value CoaXPress frame grabbers
-
Product
Fixed Mounting Frame, iCon, 1U, 2 Positions, Painted Gray
310113491
-
The iCon Fixed Mounting Frame has 2 horizontal positions. iCon cover plate sold separately (310 113 467).
-
Product
Intel® Core™ Ultra Processor-Based Fanless Open Frame Touch Panel PC
SP2-MTL Series
-
- Intel® Core™ Ultra H series (Meteor Lake) processor- 10.1"/15.6"/21.5" Projected capacitive touch screen- 3x independent display output, LVDS, DP, USB type C- Full customization for fast integration with all form factors, kiosks, and all-in-one panel PC applications- Extensive I/O and function expansion through board-to-board connectors (Function Modules)- Support PoE by extension module (optional)- Support NVIDIA MXM GPU type A by carrier board (optional)- Pre-compliance EMC testing and high ESD tolerance
-
Product
CL PX4 Dual Frame Grabber
Xcelera-CL PX4 Dual
-
Building on the field proven technology and performance of Teledyne DALSA’s X64 frame grabbers the new Xcelera Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility. The PCIe host interface is a point to point host interface allowing simultaneous image acquisition and transfer without loading the system bus and involving little intervention from the host CPU. The X64 Xcelera-CL PX4 Dual is a highly versatile PCIe frame grabber capable of acquiring images from two independent Camera Link™ Base cameras and performing image transfers at rates up to 1024MB/s. Its low cost, combined with its ability to support multiple tap configurations from area and linescan monochrome/RGB cameras simultaneously; in addition to its onboard FPGA Bayer decoding and real-time shading correction makes the X64 Xcelera-CL PX4 Dual an ideal solution to a wide variety cost-sensitive applications.
-
Product
Open Frame 3U front / 6U rear 50HP
-
An open-frame solution for the open-minded engineer. With moveable rear profiles (up to 2.5mm,) 3U and 6U backplane compatibility options, air or conduction cooling options and the ease of fast and simple backplane interchangeability for fluid transition between VITA and PICMG bus architectures, the Hartmann Open Frame Chassis solution is the tool for customers who need versatility, accessibility and longevity.
-
Product
2-Port GigE Vision Frame Grabber Module
AMAX-5410
-
Compatibility: IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3afSpeed: 10/100/1000 MbpsNo. of Ports: 2 Gigabit Ethernet Media Access Control (MAC) andphysical layer (PHY) portsInput Voltage: 24 VDC direct from WISE-5000 CPU module
-
Product
1-Port PCI Express Camera Link Frame Grabber
PCIE-1121
-
Half-Size PCI Express Board Gen 2.0 x4Camera Link clock up to 85 MHzCamera Link Base/Medium/Full/80-BitSupports up to 4 independent camerasSupports PoCL and non-PoCL cameras with SafePowerImage sizes up to 268,435,456 x 16,777,216Independent I/O (trigger, encoder, strobe, etc) for each camera
-
Product
4-Port PCI Express USB Vision Frame Grabber
PCIE-1154-BE
-
Half-Size PCI Express Board Gen 2.0 x4 delivering 2.0 GB/s total bandwidthHost Controller – Renesas μPD720202Supports four USB 3.0LED indicator for each portSupports 900-mA max. current per portSupports cable-lock mechanism for reliable cable connectionSupports Microsoft Windows 7/8.1/10 and Linux
-
Product
FireBird Camera Link 3U cPCI Serial Frame Grabber
AS-FBD-1XCLD-3CPCIS-2PE4
-
The FireBird Camera Link CompactPCI Serial card is a member of Active Silicon’s state-of-the-art FireBird frame grabber family. FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.
-
Product
FireBird Camera Link Frame Grabber (2xCLD-2PE8)
AS-FBD-2XCLD-2PE8
-
FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.
-
Product
2-CH PCI Express® 10 GigE Vision PoE+ Grabber
PCIe-10GPoE
-
ADLINK's PCIe-10GPoE PCI Express® PoE+ frame grabber supports 2-CH independent Gigabit Ethernet ports for multiple GigE Vision connections transferring up to 10Gb/s per port. PoE+ provides up to 30W power and automatic detection for stable, reliable connections, reducing costs, simplifying installation, and easing maintenance burdens. Exclusive comprehensive PoE Protection secures assets prevents overcurrent and overvoltage avoiding equipment damage. Smart PoE Management, easy-to-use utility and API provide realtime PoE status monitoring and control, lowering maintenance costs and predicting possible failure in advance. ToE (Trigger Over Ethernet), FPGA-based Trigger over Ethernet synchronizing multi-camera acquisitions significantly reduce ownership costs.
-
Product
ITA, G40x, 48 Module, Frame Without Protective Cover, Includes EMI Protection
410120361
-
ITA, G40x, 48 Module, Frame Without Protective Cover, Includes EMI Protection.ITA, G40X 410120246 has been obsoleted in favor of 410120361 with EMI shielding.
-
Product
7th Gen. Intel® Core™ Processor-Based Fanless Open Frame Touch Panel PC
SP2-KL Series
-
- 7th Gen. Intel® Core™ Proc- 10.1"/15.6"/21.5" PCAP touch screen- Wide input voltage range 9-36V DC- Full customization for fast integration with all form factors, kiosks, and all-in-one panel PC applications- Enhanced protection in case of sudden power outage with back-up battery (Optional)- Pre-compliance EMC testing and high ESD tolerance
-
Product
7"/10.1"/12.1"/15"/15.6"/17"/18.5"/19"/21.5"/23.8"/27"/32"/43" Open Frame Industrial Touch Monitor
OM Series
-
We team up with AUO® to ensure delivering the products with solid-build quality, which is protected with 7H hardness and an IP65 front panel. Our monitors can easily withstand the hazards of harsh environments, such as water, dust ingress, scratches, abrasions, and metallic dust. On average, these monitors have a mean time before failure (MTBF) of up to 50,000 hours, minimizing maintenance costs.
-
Product
CL LX1 Base Frame Grabber
Xcelera-CL LX1 Base
-
Building on the field proven technology and performance of DALSA’s X64 frame grabbers, the X64 Xcelera™ Series leverages the PCI Express (PCIe) platform to bring traditional image acquisition and processing technology to new levels of performance and flexibility.The PCIe point-to-point host interface allows simultaneous image acquisition and transfer with little intervention from the host CPU.The X64 Xcelera -CL LX1 Base is a cost effective frame grabber based on the PCI Express x1 interface. Fully compliant with Camera Link (V. 1.20) specifications, the Xcelera-CL LX1 supports single Base cameras and can acquire images from a wide variety of multi-tap area and line scan, color and monochrome cameras.
-
Product
USB MPEG Frame Grabber
2251
-
MPEG1/2/4 and JPEG capture to USB from an analog video source at D1 resolution Compact form factor for embedded designs 30 fps NTSC, 25 fps PAL Synchronous audio capture from a line level (stereo) input Multiple region motion detection Text overlay (OSD) SDK works with multiple units
-
Product
11th Gen. Intel® Core™ Processor-Based Fanless Open Frame Touch Panel PC
SP2-TGL Series
-
- 11th Gen. Intel® Core™ Processor- 10.1"/15.6"/21.5" PCAP touch screen- Wide input voltage range 9-36V DC- Full customization for fast integration with all form factors, kiosks, and all-in-one panel PC applications- Extensive I/O and function expansion through board-to-board connectors (Function Modules)- Enhanced protection in case of sudden power outage with back-up battery (Optional)- Pre-compliance EMC testing and high ESD tolerance
-
Product
18.5" 1366 X 768, VGA/DVI/HDMI Interface, Ultra Slim Touch Open Frame Monitor
IDS-3118W
-
18.5" 1366x768 HD LCD panel with LED backlight for 20% power saving and environmental protection. 0° ~ 55° C wide range operating temperature, 5-wire resistive and P-cap touchscreen solution, Touch interface: USB & RS-232.
-
Product
10.4" 800 X 600, VGA/DVI Interface, Ultra Slim Touch Open Frame Monitor
IDS-3110
-
10.4" 800 x 600 SVGA LED panel with LED backlight for 20% power saving and environmental protection. -20°C~+60°C wide operating temperature support, 5-wires resistive touchscreen solution.
-
Product
2-Port PCI Express Camera Link, Base Frame Grabber
PCIE-1122B-AE
-
Half-Size PCI Express Board Gen 2.0 x4Camera Link clock up to 85 MHzSupports 2 Base CL camerasSupports PoCL and non-PoCL cameras with SafePowerImage sizes up to 268,435,456 x 16,777,216Independent I/O (trigger, encoder, strobe, etc) for each camera
