Product

High-Performance Radar Sensors for Distance Measurement

OndoSense apex (E)

-

OndoSense GmbH

OndoSense apex (E) - OndoSense GmbH

Highly precise, versatile & reliable radar sensors for Industry 4.0. With sensor solutions based on high-precision, robust and reliable radar technology and smart sensor software, we provide relevant data for the intelligent control and regulation of production systems and machines.

Product

Non-destructive Eddy Current Testing of Long Products such as Tubes, Rods, Wire, and Profiles

DEFECTOMAT® Product Familiy

-

Foerster Instruments, Incorporated

DEFECTOMAT® Product Familiy - Foerster Instruments, Incorporated

The DEFECTOMAT systems by FOERSTER were specially developed for quality testing and process monitoring of long products. From hot testing to all bright steel processing steps, the surfaces of semi-finished products made from austenitic, (non) ferromagnetic metals can be tested for defects. The DEFECTOMAT systems operate in a contactless and non-destructive manner in accordance with the eddy current method and are used for detecting short defects, such as holes or localized defects and transverse defects. The systems detect defective materials fully automatically and reliably. Defects can be marked, classified, and automatically discarded. the test speed of up to 150 m/s facilitates 100% testing, even at high production speeds. The systems benefit from low operating costs and frugal energy consumption as well as low maintenance costs, few wear parts, and low use of materials.

Product

Ruggedized Laser Distance Meter with Compass

TRUPULSE 360R

-

F. W. Breithaupt & Sohn GmbH & Co.KG

TRUPULSE 360R - F. W. Breithaupt & Sohn GmbH & Co.KG

*Scope magnification 7-times*Field of view 100m/915m distance*LCD Display*Range to non-reflecting targets 1.000m*Range to reflecting targets 2.000m*Accuracy in range ± 30cm (± 1m to weak targets; shown in display)*Accuracy in slope ± 0,25°*TruVector Compass Technology*Accuracy of compass ± 1° typical*RS 232/Serial interface (Model B: with Bluetooth)*IP protection IP56

Product

USB-C® Tx & Long Chnnel Rx Precet. Test Fixture

AUT20044 Rev:B0

-

Allion

AUT20044 Rev:B0 - Allion

The original Intel USB-C 3.1 Tx Test Fixtures includes two types of fixtures, UFP and DPF. Allion Pre-Cert Test Fixture integrates functions of the two fixtures into an one-board solution, eliminating the hassel to frequent switching of two fixtures.

Product

Laser Distance Meters

-

HT Italia Srl

HT Italia Srl

Those Laser distance meters are the evolution of linear measurement with possibility of carrying out precision measurements, geometric calculations and transferring data onto your smartphone or tablet through the relevant App, available in the store.

Product

UV LED Mallina Long Range Stimulator

Mallina™

-

Textron Systems

Mallina™ - Textron Systems

Mallina™ is a long-range ultraviolet (UV) stimulator capable of testing aircraft electro-optical sensor suites up to 10 km (6.2 mi). Mallina can operate as an independent UV stimulator and/or can be integrated with our other electro-optical and radio frequency range systems (see GTESS, PRTS, Phoenix and Phantom).

Product

SparkFun Distance Sensor Breakout

4 Meter, VL53L1X (Qwiic)

-

SparkFun Electronics

4 Meter, VL53L1X (Qwiic) - SparkFun Electronics

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X from STMicroelectronics uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the reflection to the target. That means that you will be able to measure the distance to an object from 40mm to 4m away with millimeter resolution! To make it even easier to get your readings, all communication is enacted exclusively via I2C, utilizing our handy Qwiic system so no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1”-spaced pins in case you prefer to use a breadboard.

Product

Laser Distance Meter for 60m With 10 Memories and Min. Measurement

MS-LDM360

-

MEET International Ltd.

MS-LDM360 - MEET International Ltd.

*Measuring distance: 0.05 to 60m*Accuracy: ±1.5mm (±0.06in)*Unit conversion: mm/in/ft*Laser classification: Class 2*Laser type: 635nm <1mW*Dynamic measurement*Area, volume measurement*Pythagorean proposition measurement*Indirect measurement*Add - subtract calculation*Minimum measurement

Product

Laser Distance Meter for 40m With 10 Memories and Min. Measurement

MS-LDM340

-

MEET International Ltd.

MS-LDM340 - MEET International Ltd.

*Measuring distance: 0.05 to 40m*Accuracy: ±1.5mm (±0.06in)*Unit conversion: mm/in/ft*Laser classification: Class 2*Laser type: 635nm <1mW*Dynamic measurement*Area, volume measurement*Pythagorean proposition measurement

Product

Laser Distance Meter with Clinometer

TRUPULSE 200

-

F. W. Breithaupt & Sohn GmbH & Co.KG

TRUPULSE 200 - F. W. Breithaupt & Sohn GmbH & Co.KG

*Scope magnification 7-times*Field of view 100m/915m distance*LCD Display in scope: target and measurement data at one glance*Range to non-reflecting targets 1.000m*Range to reflecting targets 2.000m*Accuracy in range ± 20cm (± 1m to weak targets; shown in display)*Accuracy in slope ± 0,25°*RS 232/Serial interface and with Bluetooth*IP protection IP54

Product

Long Light Source

LM-A

-

Eddy Co.

LM-A - Eddy Co.

The long light source is compatible with the LM-101 or the LMC-20. The light is supplied with a 50 watt tungsten halogen convection cooled light source which provides suffcient energy for use with narrow band pass filters or monochronomators in the wave length range of .35 to 2.5 microns. The light beam is chopped at 200 hz by a quiet, vibration free, synchronous motor. The housing also contains a secondary LED light source and detector for synchronization of the amplifier, plus an electro-mechanical shutter to block the light output when the instrument is zeroed. An internal collimating lens produces a narrow beam (<1") so the LM-A can be used in bell-jar and large coating systems.

Product

High-precision radar sensors for distance measurement, level measurement & collision avoidance

-

OndoSense GmbH

OndoSense GmbH

With our OndoSense apex and OndoSense reach radar sensors for distance measurement, level measurement & collision avoidance, you will benefit from the highest accuracy and measurement speed combined with an extremely robust radar technology for harsh industrial environments. The smart distance radar sensors provide great configuration features, a unique range of industrial applications and a wide measuring range.

Product

Long Range, High Resolution Perimeter Surveillance Doppler Radar

Ranger® R5D

-

Teledyne FLIR

Ranger® R5D - Teledyne FLIR

The Ranger® R5D is a dual mode, ground surveillance radar designed specifically for the environmental conditions common to the Middle East region. As a dual mode radar, the Ranger R5D uses FMCW modulation and can be operated in either Fast Scan or Doppler mode with a Fast Scan range up to 5km. Low minimum detection velocity (MDV), high resolution, and advanced tracking algorithms result in low false alarm rates.

Product

Long Range, High Resolution Perimeter Surveillance Radar

Ranger® R5

-

Teledyne FLIR

Ranger® R5 - Teledyne FLIR

The Ranger® R5 is a ground-based radar, designed to withstand the rigors of a desert environment. Providing 24/7 security to ranges of up to 5,000 meters, the Ranger R5 scans a full 360° every second, effectively monitoring up to 78 square kilometers (30 square miles). Multiple units can be installed with overlapping coverage areas to protect larger areas such as borders. Network with FLIR EO/IR imagers to initiate slew-to-cue capability.

Product

Long Travel Extensometers

-

Lloyd Material Testing

Lloyd Material Testing

The first type is specifically aimed at the plastic and rubber industries to provide accurate readings of strain and extension over a large extension range. The unit, incorporating two clamping arms and precision potentiometers, produces a DC voltage proportional to the distance between the arms. This generates accurate readings of percentage strain and allows additional parameters such as yield point and break points to be calculated when used with NEXYGENPlus software.

Product

CMOS Type Micro Laser Distance Sensor

HG-C

-

Panasonic Industrial Devices Sales Company of America

HG-C - Panasonic Industrial Devices Sales Company of America

Housed in a lightweight but strong die-cast aluminum case, the compact HG-C Series pairs a highly precise CMOS Image Sensor with a newly designed optical system to achieve a smaller Sensor depth, as well as, highly accurate measurements in the order of 1/100 mm (0.0003 In.).

Product

Single Long Pulse Solar Simulator & I-V Test System

TriSOL SLPSS

-

OAI

TriSOL SLPSS - OAI

The OAI Test System for HIGH EFFICIENCY SOLAR CELLS overcomes the limitations of flash testing by providing a highly optimized pulse width and voltage sweep rate to match the cell’s dielectric response speed. As a result, the system produces extremely accurate measurements of solar cell efficiency leading to increased profitability.

Product

Laser Distance Meter M-LDM-50P

Laser Distance Meter M-LDM-50P

-

Fuzhou Metricu Technology Co Ltd

Laser Distance Meter M-LDM-50P - Fuzhou Metricu Technology Co Ltd

Laser Distance Meter

Product

Long Exposure Time Imaging Cooled CCD Camera

Retiga LUMO

-

Teledyne Photometrics

Retiga LUMO - Teledyne Photometrics

The Retiga LUMO CCD camera is a cooled, 6 megapixel camera that takes advantage of advanced technical features to enable detection and quantification of ultra-low light luminescence signals and for applications that require long exposure times.