kW
-
Product
AC Clamp Power Meter
CM3286 Series
-
Measure power ranging from 5 W at a low current of 60 mA to 360 kW. In addition to current, voltage, and power, measure simple integral power consumption and phase sequence. Discover manipulation of electric meters by comparing meter and integral power consumption measurements. Discover theft by measuring leakage current.
-
Product
Eddy Current Chassis Dynamometers
-
Cradle- or single-roll (top-mount) dynamometers accommodating single- or tandem-axle vehicles, with continuous vehicle power ranges from 50 hp to 622 hp (37 kW to 464 kW), Taylor’s chassis dynamometers allow a top recommended speed of 90 mph (145 kph) at full load. Look to our experts to not only help you select your optimal system, but also to provide design, configuration, installation and training for a total solution that integrates seamlessly with your operation.
-
Product
Load Banks
BD Series
-
*12 kW, 15kW and 18kW Battery Discharge Load DC*All of our Load Banks are continuously rated for Power and Current.
-
Product
Programmable DC Power Supply
62000E Series
-
Chroma 62000E Series offers single channel models with power ratings of 1.7kW, 3.4 kW, and 5kW, and three channel models rated at 1.7kW, all housed in a compact 1U chassis featuring industry-leading power density.
-
Product
550 HP Water Brake Chassis Dynamometer
TD-24S
-
Weight Capacity: 30,000 lb (13,608 kg) per axleRoll Brakes: Pneumatically-actuated discShipping Weight: 8,700 lb (3,946 kg)Capacity: 550 hp at 35 mph (410 kW at 56 kph)Rolls: 24 by 34 in. (610 by 864 mm) 4 front fixed rollsPit Required Depth: 27 in. (686 mm)
-
Product
Engine Dynamometer
DH21
-
Power: 270 hp (205 kW)Torque: 425 lb-ft (576 Nm)Speed: 5,500 rpmWater Use*: 20 gpm (75.7 lpm)Inertia Value: 3.4 lb·ft2 (0.143 kg·m2)Shipping Weight: 325 lb (147 kg)*No Cooling System
-
Product
Regenerative Power System, 1500 V, ±60 A, 30 KW, 400/480 VAC
RP7984A
-
The RP7984A regenerative power system is a single output, bi-directional, regenerative DC power supply with highly integrated safety features that protect both your people and your device under test.
-
Product
CRYOGENIC GYROTRON SYSTEMS AT 37.5 & 83 GHz
-
Insight Product Company offers cryogenic, or "cold" Gyrotron tubes at 37.5 and at 83 GHz with CW output power up to 20 kW. "Cold" tubes operates with the cryomagnet which suits to both gyrotrons.
-
Product
Engine Dynamometer
DE30
-
Power: 40 hp (30 kW)Torque: 70 lb-ft (95 Nm)Speed: 14,000 rpmWater Use*: 10 gpm (37.9 lpm)Inertia Value: 0.40 lb·ft2 (0.0168 kg·m2)Shipping Weight: 1,213 lb (550 kg)Rotation: bi-directional*No Cooling System
-
Product
Scienlab Battery Test System – Pack Level, 110 KW Extendable Version
SL1720A
-
Keysight’s SL1700A Scienlab Battery Test System – Pack Level Series allows to realistically emulate the environment of the future battery pack application in order to test the high-power battery pack comprehensively and improve its functions and safety. The growing demand of e-mobility increases the need of vast battery test labs for EV battery development.
-
Product
VLF Testing and Diagnostics System
PHG 70 TD/PD
-
Cable testing and diagnostics with the BAUR PHG 70 TD/PD. With the PHG TD/PD, you get a multifunctional cable testing and diagnostics system that was specially designed and developed for medium-voltage networks. The PHG TD/PD system is also the only cable testing and diagnostics system that gives a comprehensive overview of the quality and ageing condition of the test sample. The diagnostic methods TD and PD are mutually complementary, because on one hand you can detect the complete condition and on the other hand locate * individual faults in the operating resources.* High performance VLF truesinus testing device (3 kW) with regulated output voltageCompact, enclosed design in 19" format* Variable installation option with separate control and voltage unit* Variable connection options to cable stations of different models
-
Product
Engine Dynamometer
M2
-
Power: 50 hp (37 kW)Torque: 68 lb-ft (92 Nm)Speed: 6,000 rpmWater Use*: 10 gpm (37.9 lpm)Shipping Weight: 150 lb (68 kg)*No Cooling System
-
Product
Regenerative Power System, 80 V, ±250 A, 10 KW, 400/480 VAC
RP7945A
-
The Keysight RP7945A regenerative power system is a single output, bi-directional, regenerative DC power supply with highly integrated safety features that protect both your people and your device under test.
-
Product
Engine Dynamometer
DS46-HS
-
Power: 2,125 hp (1,584 kW)Torque: 7,125 lb-ft (9,660 Nm)Speed: 4,000 rpmWater Use*: 147 gpm (556.5 lpm)Inertia Value**: 172.4 lb·ft2 (7.3 kg·m2)Shipping Weight: 2,860 lb (1,297 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
Product
Autoranging System DC Power Supply, 80 V, 170 A, 5000 W, 400 VAC
N8940A
-
The Keysight N8900 Series is a family of 5 kW, 10 kW, and 15 kW autoranging, single-output power supplies available in 14 different voltage, current, and power combinations and either 208 VAC or 400 VAC (28 total models).
-
Product
Autoranging System DC Power Supply, 500 V, 30 A, 5000 W, 400 VAC
N8943A
-
The Keysight N8900 Series is a family of 5 kW, 10 kW, and 15 kW autoranging, single-output power supplies available in 14 different voltage, current, and power combinations and either 208 VAC or 400 VAC (28 total models).
-
Product
Portable Engine Dynamometers
-
Cost-effective Portable Engine Dynos from Taylor Dynamometer are water brake style systems for diesel applications up to 1,250 hp (932 kW) and 3,000 ft-lb (4,068 N) of torque. Mount yours right on the engine in minutes for fast, convenient and reliable testing.
-
Product
AC Engine Dynamometer
DA351
-
Power: 351 hp (261.7 kW)Torque: 921 lb-ft (1,248.7 Nm)Maximum Speed: 5,600 rpmConstant Torque Range: 0 - 2,000 rpmConstant Power Range: 2,000 - 3,600 rpmDecreasing Power Range: 3,600 - 5,600 rpmRotation: bi-directional
-
Product
Engine Dynamometer
DX34-HS
-
Power: 1,000 hp (746 kW)Torque: 3,217 lb-ft (4,361 Nm)Speed: 6,000 rpmWater Use*: 73 gpm (276.3 lpm)Inertia Value**: 82 lb·ft2 (3.5 kg·m2)Shipping Weight: 1,846 lb (837 kg)Rotation: bi-directional
-
Product
Resistive Load Banks
R Series
-
Load banks are devices which contain resistive, inductive and/or capacitive loads, apply the load to an electrical power source and dissipate the power of the electrical source. Portable and stationary resistive load banks incorporate as low as 1 kW load step increments for testing small to large generating sets. The fine control resolution ensures accurate load control and power factor targeting adjustments.
-
Product
Thermal Management Solutions
-
AMS Technologies has a long track record of developing and manufacturing thermal solutions for customers – suitable for applications like: *Reagents Cooling *Laser Cooling from 0,2 to 3 kW *Small Cabinet Cooling *Wide Range Temperature Stabilization Covering -60°C to +180°C *Compact Dehumidifying*and many more.Some of AMS Technologies’ thermal management solutions may be used as an OEM kit for integration into your application as well. Currently available are thermal management solutions for direct cooling (a mounting plate that is temperature stabilized), air cooling and liquid cooling.
-
Product
Engine Dynamometer
DS4010-HS
-
Power: 3,500 hp (2,611 kW)Torque: 11,875 lb-ft (16,100 Nm)Speed: 4,000 rpmWater Use*: 255 gpm (965.3 lpm)Inertia Value**: 290.8 lb·ft2 (12.3 kg·m2)Shipping Weight: 4,620 lb (2,097 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
Product
STPOWER RF DMOS Transistors
-
ST offers a broad portfolio of RF DMOS (double-diffused metal oxide semiconductor) transistors operating from a supply voltage ranging from 50 up to 100 V with high reliability (1 million power cycles). Targeting applications in the 1 to 250 MHz frequency range, our RF DMOS transistors feature high peak power (up to 1.2 kW) and high ruggedness capability (infinite:1 VSWR).
-
Product
Engine Dynamometer
DE150
-
Power: 201 hp (150 kW)Torque: 369 lb-ft (500 Nm)Speed: 12,000 rpmWater Use*: 28 gpm (106 lpm)Inertia Value: 2.21 lb·ft2 (0.093 kg·m2)Shipping Weight: 1,753 lb (795 kg)Rotation: bi-directional*No Cooling System
-
Product
Water Brake Engine Dynamometers
DS Series
-
Similar in design to the DX Series, Taylor Dynamometer’s DS Series Water Brake Engine Dynos DS dynamometers bring you proven durability. In addition, this line provides increased power capacity – from 2,125 hp up to 4,250 hp (1,584 kW up to 3,169 kW) – thanks to larger diameter components.
-
Product
Amplifiers
-
We have designed and manufactured amplifiers using all major semiconductor materials, LDMOS, GaN, GaAs, and InP, to produce narrow, wideband, and pulse, receive and transmit amplifiers from 1 MHz to 220 GHz and power levels from mW to over 10 kW.
-
Product
Capacitor Charging Power Supplies
-
Excelitas Capacitor Chargers are tailored to meet your exact needs by configuring modular platforms based on proven designs. Single-phase AC input designs are capable of up to 6 kW of output power and our three-phase designs provide up to 35 kW of output power. A modular design approach results in lower cost, higher reliability, and faster time-to-market. Typical applications for capacitor charging power supplies include flashlamp pumped laser systems (Nd: YAG, pulsed lasers, dye lasers, Intense Pulsed Light Systems (IPL) and aesthetic Medical Laser Systems, Medical Holmium YAG Laser), excimer lasers, pulsed UV curing and sterilization, radar and RF systems.
-
Product
Engine Dynamometer
DX35
-
Power: 1,250 hp (932 kW)Torque: 4,021 lb-ft (5,452 Nm)Speed: 4,000 rpmWater Use*: 91 gpm (344.5 lpm)Inertia Value**: 101.6 lb·ft2 (4.3 kg·m2)Shipping Weight: 2,043 lb (927 kg)Rotation: bi-directional
-
Product
Engine Dynamometer
H3606
-
Power: 2,000 hp (1,491 kW)Torque: 23,873 lb-ft (32,367 Nm)Speed: 2,550 rpmWater Use*: 146 gpm (552.7 lpm)Inertia Value**: 311.4 lb·ft2 (13.12 kg·m2)Shipping Weight: 3,339 lb (1,515 kg)*No Cooling System**With Companion Flange
-
Product
AC Power Calibrator
LS3300
-
The LS3300 is an AC signal generator capable of outputting both current and voltage simultaneously, thus allowing it to calibrate power meters. Providing output ranges of 10mV-1250V, and 0.3 mA to 62.5 A, and upto 78.125 kW, the unit is capable of calibrating up to 0.15 % Class Power meters. New features on the LS3300 include a high definition LCD display, a vector diagram, and the ability to synchronize up to three units to emulate anything from single phase two wire to three phase four wire systems.
