Frequency Weighting
-
Product
Radio Frequency Probe HF05PCBGSG016G430MSMPmFV2
1024472
-
The HF05PCBGSG016G430MSMPmFV2 Radio Frequency Probe is designed for high-precision applications, providing exceptional performance within its operational temperature range of -45°C to +100°C. This probe is specifically engineered to maintain a consistent impedance of 50 ohms while handling continuous currents of up to 0.5A, making it ideal for a variety of consumer RF applications. Its coaxial design ensures minimal signal loss, thereby enhancing the reliability and accuracy of measurements.
-
Product
Low Frequency RF Broadband Power Sources
-
Class A has RF power source, ideal for Industrial /Scientific / Medical applications. Class AS is a robust source of RF power for ultrasonic, laser modulation, RFI/EMI, plasma generation, general laboratory and industrial applications.
-
Product
Series Low Frequency Vibration Sensors
AC136
-
Low Frequency Accelerometer, Side Exit Connector / Cable, 500 mV/g
-
Product
5 Digit Frequency Meter
CS1-F
-
CS1-F economic type Frequency Meter is designed with high accuracy measurement, display and communication of Frequency.The innovation feature is auto-range input from 0.01Hz~100KHz(option ~140KHz) and the display resolution will auto-change to show the highest according to input frequency.They are also available 1 option of 1 Relay outputs, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of panels and testing applications.
-
Product
Frequency Family 1 – 1000 MHz
-
A broadband amplifier that covers the 1 – 1000 MHz frequency range. This small and lightweight amplifier utilizes Class A/AB linear power devices that provide an excellent 3rd order intercept point, high gain, anda wide dynamic range.
-
Product
Signal Generator Frequency Extenders
FES
-
These frequency extension modules easily connect to the output of your signal generator so you have high-performance source for your DUT characterization activities. Characterize your DUT with the confidence that the superior performance in terms of output power, spurious and harmonic will provide product accurate results.
-
Product
Reference Frequency Generator
MFCh
-
*Frequency reproduction accuracy ± 2 x 10 -9 *Output frequency 1 Hz - 10 MHz *Output pulse signal 1 kHz The MFC is designed to generate high-frequency pulse signals with a frequency of 1 kHz and a frequency in the range from 1 Hz to 10 MHz along two output lines. The MFC is designed to operate in measuring systems based on the VXIbus trunk. In the MFC, a rubidium frequency standard is used as a reference frequency source. Time to reach the mode when the power source of the rubidium standard is turned on, no more than 10 min
-
Product
Frequency Counters/Timers
-
The Tektronix FCA Series frequency counter / timer / analyzer packs the functionality of a frequency counter, frequency meter and timer into one feature-rich instrument. With unprecedented resolution, you can capture very small frequency and time changes. Tektronix frequency counters and timers offer comprehensive analysis modes, including measurement statistics, histograms, and trend plots.
-
-
Product
Combination Emissions Tester on Trolley for the Measurement of Diesel- and Petrol-Powered Vehicles - Low Weight, Short Warm Up Time
MCT T | VP 135225
-
Maschinenbau Haldenwang GmbH & Co. KG.
The combination tester on trolley is designed for the measurement of petrol- and diesel-powered vehicles. In addition, low weight, compact design and short warm-up time ensure easy handling.
-
Product
Radio Frequency Probes (Consumer) HF860RFm016G530MCXfS
1039104
-
Introducing the Radio Frequency Probes HF860, designed with precision to meet the demanding needs of RF applications. This coaxial probe features an impressive pitch of 6mm/236mil and operates effectively across a temperature range of -45°C to +100°C. With capabilities extending to a frequency of 6 GHz, it ensures reliable and accurate measurements in various settings. The product's design incorporates high-quality materials, including a beryllium copper plunger and brass barrel, both plated with gold for enhanced conductivity and durability.
-
Product
Radio Frequency Probes (Industrial) HF890MMBXf-SMAf0112G910SMPmP
1042148
-
The Radio Frequency Probes (Industrial) HF890MMBXf-SMAf0112G910SMPmP is designed for high-performance applications, providing exceptional reliability and precision in environmental conditions ranging from -45°C to +100°C. Its innovative design features a pitch of 12.0 mm (472 mil) and incorporates both impedance and frequency ratings at 50 ohms and 12 GHz respectively, ensuring optimal signal integrity. This probe is particularly suited for demanding applications where electrical specifications, such as a continuous current rating of 10 A, are crucial for maintaining service stability.
-
Product
Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfPV1
1033407
-
The Radio Frequency Probes (Automotive) HF860FAKRAm016G950MCXfPV1 is a precision engineered coaxial probe essential for automotive applications. This robust probe is designed to withstand a wide temperature range of -45°C to +100°C, making it suitable for various testing scenarios. Built with a pitch of 6.50 mm (256 mil), it ensures reliable signal integrity for high-frequency applications up to 6.00 GHz. The continuous current capacity of 10 A guarantees efficient operation under demanding conditions, with an additional continuous current rating of 3 A designed for alternate applications.
-
Product
Radio Frequency Probes (Automotive) HF77MATEAXm0412G2160MSMPmF
1035528
-
Introducing the Radio Frequency Probes (Automotive) HF77MATEAXm0412G2160MSMPmF, a high-performance coaxial probe engineered for advanced automotive applications. This probe is designed to operate effectively across a wide temperature range of -45°C to +100°C and is optimized for continuous current operations, supporting up to 0.50A while maintaining an impedance of 50 ohms. With a precise frequency response of 12 GHz, this probe ensures accurate and reliable measurements in demanding environments.
-
Product
Servo Analyzer (Frequency Characteristics Analyzer)
DS-0342
-
The DS-0342 Servo Analyzer (Frequency Characteristics Analyzer) is a device that measures the transfer function (frequency response function) of control circuits and mechanical structures with high accuracy.It can measure characteristics (phase margin, gain margin) of the control circuit, resonance frequency of the structure, and impedance, etc.This is a PC based servo analyzer that pursues usability with the following functions in addition to "easy-to-use operability" and "diversity of graph display".
-
Product
110 GHz Frequency Extender, Pulsed DC Bias
N5293AX02
Frequency Extender
The N5293AX02 is a compact and broadband frequency extender with built-in pulsed bias-tee and provides 10 MHz to 110 GHz single-sweep measurements with N5292A test set controller systemized with a PNA/PNA-X B vector network analyzer.
-
Product
Ground Isolated ICP® Pressure Sensors For High Frequency
-
PCB® Series 102B is a ground isolated version of the Series 113B. These sensors have all of the same features and benefits of the 113B Series, plus the added benefit of isolation, which helps prevent ground loop problems. This series can accommodate an optional ablative coating (Prefix: CA) to protect the diaphragm from thermal shock in flash-temperature applications.
-
Product
Frequency Multipliers
-
Analog Devices active and passive frequency multipliers enable designers to economically multiply lower frequencies to higher frequencies without creating measurable additive phase noise. This broad portfolio features a range of devices that can meet the size, volume, and cost needs for multiple applications, including:
-
Product
Frequency Reference
-
Quartzlock time and frequency standards offer a complete range of cost effective and low noise in both atomic controlled (rubidium oscillator) and GPS controlled (off-air) time and frequency reference, calibrators and standards. These acurate time and frequency references are used in telecoms, aviation, nautical and precision test and measurement enviroments.
-
Product
Radio Frequency Probes (Consumer) HF66SWG016G340SMAfF
1024463
-
The Radio Frequency Probes HF66SWG016G340SMAfF is a high-performance coaxial probe designed to meet the rigorous demands of advanced wireless communications and measurement applications. With a compact design and a pitch of 9.00 mm, this probe operates efficiently across a temperature range of -45°C to +100°C, ensuring reliable performance in diverse environments. Its exceptional impedance of 50 ohms and frequency rating of 6 GHz make it ideal for high-frequency applications, providing stable and accurate readings. Additionally, the continuous current rating of 0.50 A ensures sufficient power handling without overheating, allowing for extended testing sessions.
-
Product
Radio Frequency Probes (Automotive) HF77SMKMINIFAKRAm0212G1080MSMPmF
1139613
-
The Radio Frequency Probes (Automotive) HF77SMKMINIFAKRAm0212G1080MSMPmF is engineered for high precision and performance in automotive applications. This coaxial probe features a compact design with a pitch of 12.0 mm, making it ideal for integrating into tight spaces within automotive electronics. With an impedance of 50 ohms and a maximum frequency capability of 12 GHz, it ensures reliable signal integrity for various RF testing purposes.
-
Product
Radio Frequency Probes (Industrial) HF860PCBCC014G530MCXfS
1038337
-
The Radio Frequency Probes (Industrial) HF860PCBCC014G530MCXfS are engineered specifically for high-performance applications in the telecommunications and electronics sectors. This model features a robust coaxial probe design tailored for precise measurements and reliability in a wide temperature range of -45°C to +100°C. With a pitch of 6.00 mm (or 236 mil), this probe is optimal for tightly packed electronic assemblies where precision is paramount.
-
Product
RF Radio - Frequency Probes
-
*3 to 6 Ghz *PCB MCX SMB SMC *SMA U. FL MS / MM Fakra *Exchangeable inner plunger
-
Product
Frequency Response Analyzers
7400 Series
-
The Venable Model 7400 Series is the top of the line in Venable performance, supplying 4 channels for increased testing, measurement and analysis functionality. Originally designed for measuring 3-phase impedance and source and load simultaneously, the Model 7400 is a robust solution for organizations requiring high availability for high volume and/or simultaneous testing.
-
Product
Frequency Sensor
-
DARE?s frequency sensors and monitors are available in both AC powered and DC powered models in a wide variety of standard or custom enclosures. Used in aircraft, ground support equipment (GSE), ground power applications, and other military and industrial applications, DARE frequency sensors, monitors, and frequency sensing relays will protect equipment that is sensitive to fluctuations in power line frequency from damage due to over and / or under frequency conditions.
-
Product
Radio Frequency (RF) Recording and Playback Instruments
-
Adivic Radio Frequency (RF) Recording and Playback Instruments
-
Product
Radio Frequency Probe HF77MATEAXm0112G540MSMPmFV1
1036172
-
The HF77MATEAXm0112G540MSMPmFV1 Radio Frequency Probe is specifically designed for automotive applications, providing a reliable solution for precision measurements and testing in various environments. With its robust construction, the probe is capable of operating within a temperature range of -45°C to +100°C, ensuring durability in demanding conditions. This probe integrates seamlessly into automotive systems, enhancing signal integrity and accuracy during diagnosis and tuning tasks.
-
Product
Signature Model High Frequency Surge Testers
S
-
Bench size performance & durability with PJ's exclusive/unique High Frequency Technology capable of testing the integrity of any turn to turn insulation, including low inductance windings. These Digital Surge Testers come standard with a rack-mounted, Tektronix TDS1002, 1 Billion Samples/sec, real time, programmable, storage oscilloscope.
-
Product
Radio Frequency, Communications, & Navigation Test Systems
Test System
Reduce testing time and costs with the Astronics radio test sets for use in military, avionics, and civil security industries.Available in commercial and military grades, these integrated test systems make it easy to develop test program sets and leverage them securely and instantly across all deployed testers at the factory, depot, and operational levels.
-
Product
2-18GHz Instantaneous Frequency Measurement Unit
DR058-F2
-
Teledyne Defence & Space’s Instantaneous Frequency Measurement (IFM) module, also known as a Digital Frequency Discriminator (DFD), offers high speed frequency measurement across the full operating bandwidth.The IFM measures the frequency of RF signal present at its input and presents a result at its output as digital data. The RF input signal is conditioned by an RF amplifier that provides sufficient drive for the frequency resolving circuits. The raw video from the resolvers is digitised and processed into the required output format. There is additional timing and control circuitry which initiates the measurement process and provides handshake data to the host system processor.
