Product

AC Current Isolated Sensor Two / Four Wire Transducer

TSCT (Average Sensing) / TFCT (TRUE RMS)

-

Kusam Electrical Industries Limited

TSCT (Average Sensing) / TFCT (TRUE RMS) - Kusam Electrical Industries Limited

• Transform Input: AC 5~400A directly into DC 4~20mA, no need external CT.• Suitable for application with high waveform distortion :(Frequency converter, Motor, SCR )• High accuracy ＜0.5%• High response time• High stability, easy connection.

Product

Automatic Wire Test Set

AWTS

-

Eclypse International

AWTS - Eclypse International

The Automatic Wire Test Set (AWTS) is automated test equipment that aids wiring diagnostics of electrical and electronic devices. The Test Control Unit (TCU) uses resistance measurements, capacitance measurements, and AC/DC voltage measurements to perform continuity, insulation, and isolation tests. The AWTS Laptop CPU, hereafter referred to as CPU, controls the AWTS. The Eclypse Language Integrated Test Environment (ELITE) is application software that controls the TCU. The majority of the hardware for a test is contained in the TCU. The 128pin connector on the TCU front panel provides 128 energizable test points. Switch Modules (SM) can be connected in sequence or daisy chained to the TCU and provide an additional 1024 test points; 128 of those are energizable.

Product

Portable Trace Oxygen Analyzer

GNL-B1A

-

Shanghai ChangAi Electronic Science & Technology Co.,Ltd

GNL-B1A - Shanghai ChangAi Electronic Science & Technology Co.,Ltd

GNL-B1A portable oxygen analyzer is used to measure the oxygen concentration in clean, dry and noncorrosive gas in plus pressure and widely used in the fields of nitrogen separation from air, petrochemical, metallurgy, electronic power and machinery manufacture. - See more at: http://en.ci-ele.com/8aedb8bf-ef48-4f8c-127a-797c939a6181/e326afa7-5026-ad01-e03a-735aa5e38e37.shtml#sthash.BDXqdhqn.dpuf

Product

Corona Resistant Tester of Enamelled Wire

DPT-1000S

-

Shanghai Dean Electrical Co., Ltd

DPT-1000S - Shanghai Dean Electrical Co., Ltd

·The tester is comply with the requirements of standards GB/T 1707-2008, GB/T 24122-2009, GB14711-2013, meet the requirement of standard JB/T 10930-2010;·Multiple samples can be tested at same time;·Used for testing the feature of high frequency pulse resistance (performance of Corona-resistance).

Product

Mating Coax Connector And 20 Coax Pins Crimped (One End) To 3 Foot Wires

GX96404

-

Marvin Test Solutions, Inc.

GX96404 - Marvin Test Solutions, Inc.

Mating Coax Connector and 20 Coax Pins Crimped (One End) to 3 Foot Wires

Product

Round Wire Coil Inductors

-

Pulse Electronics

Pulse Electronics

Round wire coil (RWC) inductors come in six platform sizes and enable the highest efficiency of any SMT inductor through the use of a low loss ferrite core material which minimizes AC losses and also eliminates thermal ageing.   The use of round magnetic wire instead of rectangular flat coils enables a lower cost while still maintaining a low DCR and small footprint.   The platforms have passed the AEC-Q200 stress test qualification proving the designs robustness and suitability to difficult environments but the parts are not IATF certified.  The platform range from 7.6×7.4×6.4mm to 26x26x15mm and are suitable for a wide range of applications and markets including communications, computing and industrial.

Product

Earth Resistance Soil Resistivity Tester 2 / 3 / 4 Wire

Model KM 1320

-

Kusam Electrical Industries Limited

Model KM 1320 - Kusam Electrical Industries Limited

KM 1320 Earth Resistance Soil Resistivity Tester is specially designed and manufactured for measuring earth resistance, soil resistivity, earth voltage, AC voltage. Adopting the latest digital and micro-processing technology, precise 4-pole, 3-pole and simple 2-pole method for earth resistance measurement, importing FFT and AFC technology, with a unique function of anti-interference capability and the ability to adapt to the environment, consistency of repeat testing, to ensure high precision, high stability and reliability for prolonged measure, which is widely used in electric power, telecommunications, meteorology, oil field, construction, lightning protection, industrial electrical equipment and other earth resistance, soil resistivity, earth voltage, AC voltage measurement.

Product

Voltage Tester With Wire Stripper

7122A

-

Peaceful Thriving Enterprise Co Ltd

7122A - Peaceful Thriving Enterprise Co Ltd

The product can measure AC voltage 10V to 1000V and DC voltage 7V to 1000V with polarity indication. All testing results will be displayed by LCD. This product can also measure continuity and RCD. Eventually, for the convenience of wire stripping and cutting, this product has combined the function of wire stripper.

Product

Lamp & Fixture Wiring Tester

GT3110GAM LAMPCHEK

-

GAM Products, Inc.

GT3110GAM LAMPCHEK - GAM Products, Inc.

LampChek indicates the lamp and fixture continuity.

Product

Non-destructive Eddy Current Testing of Long Products such as Tubes, Rods, Wire, and Profiles

DEFECTOMAT® Product Familiy

-

Foerster Instruments, Incorporated

DEFECTOMAT® Product Familiy - Foerster Instruments, Incorporated

The DEFECTOMAT systems by FOERSTER were specially developed for quality testing and process monitoring of long products. From hot testing to all bright steel processing steps, the surfaces of semi-finished products made from austenitic, (non) ferromagnetic metals can be tested for defects. The DEFECTOMAT systems operate in a contactless and non-destructive manner in accordance with the eddy current method and are used for detecting short defects, such as holes or localized defects and transverse defects. The systems detect defective materials fully automatically and reliably. Defects can be marked, classified, and automatically discarded. the test speed of up to 150 m/s facilitates 100% testing, even at high production speeds. The systems benefit from low operating costs and frugal energy consumption as well as low maintenance costs, few wear parts, and low use of materials.

Product

Enameled Wire Portable Pinhole Tester

-

Shanghai Dean Electrical Co., Ltd

Shanghai Dean Electrical Co., Ltd

DZK high and low voltage (portable) pinhole detector is designed and produced in accordance with GB/T4074.5-2008 standard, and can be used by users to monitor the continuous performance of the paint film of the product in real time during production and use. . It takes into account the detection function of the traditional high-voltage paint film continuity tester, and the advantages of being easy to move and replace the use position (the whole machine weight is less than 5KG and can be equipped with lithium batteries), which is convenient for users to detect multiple environments and multiple cables. use.

Product

Gauge Type T Thermocouple Wire

W-TW-44P

-

Physitemp Instruments

W-TW-44P - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

Wire Harness Tester

NX Pro

-

Dynalab Test Systems, Inc.

NX Pro - Dynalab Test Systems, Inc.

The Dynalab NX Pro Wire Harness Tester is a low-cost, feature-packed, stand-alone continuity tester with a maximum capability of 512 test points. The flexibility of the NX System allows each program to perform multiple tests, display custom messages or sounds, and analyze the results of a test or an input to "decide" which operation to perform next. The NX Pro Tester has 1.3Mb memory capacity for program storage and is compatible with Printers, Scanners, and all other Dynalab NX System accessories.