PCB Inspection
The check and evaulation of Printed Circuit Boards.
See Also: Visual Inspection, Bed of Nails, Flying Probes, AOI, Burn-In, Automated Optical Inspection
-
Product
PCB Test Points and Terminals
-
Our PCB test points and terminals feature a large loop for easy probe attachment or to facilitate the clipping on of other components. They are ideal for components which need frequent replacement and are also suitable for raising hot components above the surface of the PCB.
-
Product
High Force Type Prbobe For PCB, K100 Series 100 Mil Pitch, Receptacle
KR100
Spring Probe
K100 Series, Pitch 100mil, Receptacle, no wire wrap pin. Brass with gold finish.
-
Product
Inspection Class ROV
Phantom® L Series
-
THE PHANTOM® L6 IS THE NEWEST IN THE NEXT GENERATION OF PROVEN, RELIABLE UNDERWATER ROBOTICS PIONEERED BY DEEP OCEAN ENGINEERING IN ITS MANUFACTURE OF REMOTELY OPERATED VEHICLES (ROV), BUILT IN THE USA FOR NEARLY FOUR DECADES.
-
Product
Wafer Inspection Products
-
Sonix provides manual and automated wafer inspection and metrology systems for wafers ranging from 100mm to 300mm, with extensive analysis capabilities at both the wafer and device level. These industry-leading automated wafer inspection systems are used by the world’s top manufacturers to ensure quality from development through production.
-
Product
Micro Coax, Two Piece Contact, ITA, PCB Vertical Mount, Solder
610141109
Coax Contact (ITA)
For vertical PCB terminationsUsed with standard 50 and 120 Pin Micro Coax ModulesUp to 10GHz transmission speeds (PCB design dependent)Two-piece contact that allows for pin replacement, field repairableMates to all existing Micro Coax contactsMechanical SpecificationsDurability 10,000 cyclesContact Material Center Conductor – BeCuShield – BrassContact Plating 50µ" Au over 100µ" NiContact Termination Center Conductor - SolderShield - CrimpInsulator PTFEMating Force 1.5 lbs max [0.68 kg]Electrical SpecificationsCharacteristic Impedance 50ΩFrequency Range DC to 10 GHzVSWR 1.59 @ 10 GHzInsertion Loss – √f(GHz) x .325 dBDWV 800 V RMSContact Resistance 6 mOhms center/4 mOhms outerEnvironmental SpecificationsOperating Temperature -65°C to +125°CVibration MIL-STD 202, Method 204, Test Condition DShock MIL-STD 202, Method 213, Test Condition IInsulation Resistance 2000 MOhms Min.
-
Product
Fiber Optic Inspection & Cleaning
-
One of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.
-
Product
2.54mm PCB Adapter for ZS4000 (Qty.10)
PK-ZS-024
PCB Adapter
2.54mm PCB Adapter - ZS4000 (Qty.10)
-
Product
X-Ray Inspection System
TruView™ Fusion
-
The quality of your products is paramount to the success of your business. The TruView™ Fusion X-ray Inspection System allows you to "see inside" your products without destroying them, enabling unprecedented understanding of your manufacturing process. The TruView™ Fusion X-ray is the right solution if you are looking for a radiography system to inspect medical devices, printed circuit boards, electronic components, and mechanical parts.
-
Product
Bare Wafer Inspection System
LS-6700
-
Hitachi High-Technologies Corp.
High sensitivity (50nm:Bare). High accuracy for COP/CMP discrimination (85%). High throughput (80 wph @300mm).High positioning accuracy (+/-30m). Wafer Size 300mm / 200mm.
-
Product
In-Line Wafer Surface Defect Inspection
ALTO-SD-150/200
-
ALTO-SD SERIES IS AN IN-LINE INSPECTION SYSTEM SUPPLYING HIGH THROUGHPUT, FULL SURFACE DEFECT INSPECTION FOR ALL KINDS OF WAFERS INCLUDING SILICON, QUARTZ, SAPPHIRE, COMPOUND AND MEMS WAFERS. HIGH-RESOLUTION CAMERA OPTICS PLUS LED ILLUMINATION GUARANTEE RELIABLE DETECTION OF ALL LOCAL DEFECTS. IT INSPECTS DEFECT SIZE OF 1~ 10 MICRONS, CONFIGURABLE INSPECTION RESOLUTION TO OPTIMIZE DEFECT SIZE VS. THROUGHPUT. THE SYSTEM COMBINES HIGH-PRECISION MEASUREMENT, POWERFUL DATA ANALYSIS AND USER-FRIENDLY OPERATIONS.
-
Product
68-Pin SCSI Micro-D Fem. Right Angle PCB
40-963-068-RF
SCSI Female Connector
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
37-Pin D-Type Male Straight PCB Mount
40-963-037-SM
-
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires. 37-Pin Female connectors can be directly mated to a corresponding Pickering Switching Module while Male versions can be used to interface to a Female cable assembly termination.
-
Product
High-speed In-Line 3D CT Inspection System
X-eye 6300
-
Automatically inspects the defects of products in customer's line with high-speed 3D CT tomography.Able to inspect every defects of Double-sided PCBA & BGA mounted components precisely by solving overlapped X-ray image issue.Inspection speed of 3 sec/1FOV from loading to automatic Good/NG judgement.
-
Product
PCB Connectors
CMD Series
-
Smiths Interconnect's versatile, high density CMD connector solution for board to board and wire to board with built in coding and keying as well as ESA qualification
-
Product
100-Pin Micro-D Connector, Right Angle PCB Mount, Female, 2-56 UNC Screwlocks
C100SFX-1PR-5A
SCSI Female Connector
Female right angle PCB mount 100-pin Micro-D connector allows a user to create their own PCB based termination solution. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type C, Ø1.50mm, 155gf
K100-C150155-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style C, Tip Diameter Ø1.50mm, Spring force 155gf, Steel with Gold Plating.
-
Product
Macro Inspection
-
High-throughput automated macro inspectionAny wafer size, in less than one second with ~75 micron resolutionSmall footprint table-top system
-
Product
Connector, 104-Pin D-Type Male, PCB Mount, Right Angle, 4-40 UNC
40-963-104-RM
-
This 104-pin male D-type connector allows users to create their own connection solutions. Right angled PCB mounting - supplied with 4-40 UNC screwlocks. This connector is not suitable for direct connection to Pickering modules that use the 104-pin D-type connector.
-
Product
PCB Systems Vibration and Acceleration Simulation Solution
Xpedition
-
As the industry’s market share leader in PCB design software, the Mentor Graphics® Xpedition product augments mechanical analysis and physical testing by introducing virtual accelerated lifecycle testing much earlier in the design process. This is the industry’s first PCB-design-specific vibration and acceleration simulation solution targeting products where harsh environments can compromise product performance and reliability, including the military, aerospace, automotive and industrial markets. Traditional, physical HALT (highly accelerated lifecycle testing) is conducted just before volume manufacturing, and requires expert technicians, which can result in costly schedule delays. Bridging mechanical and electronic design disciplines, the Xpedition product provides vibration simulation significantly faster than any existing method. This results in increased test coverage and shortened design cycles to ensure product reliability and faster time to market. The Xpedition component modeling library is the most extensive in the industry, comprised of over 4,000 unique 3D solid models which are used to create highly defined parts for simulation. The 3D library allows users to easily match geometries to their 2D cell database. Designers can assemble the parts models on board and automatically mesh them for performance analysis, including stiffeners and mechanical parts. The system modeling tool is ultra-fast since it can model over 1,000 components per minute.
-
Product
25-Pin D-Type Female Straight PCB Mount
40-963-025-SF
-
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires. 25-Pin Female connectors can be directly mated to a corresponding Pickering Switching Module while Male versions can be used to interface to a Female cable assembly termination.
-
Product
Fiber Inspection & Cleaning
-
ShinewayTech Fiber Inspection & Cleaning - Optical Connector Inspector, Wireless FIber Inspection Probe, Cleaning Pen, & more.
-
Product
Digital Automated Interferometer and Microscope for Surface Inspection
DAISI-V3
-
The ultimate production interferometer for measuring end-face geometry on single-fiber connectors, equipped with a revolutionary «no-exterior-moving-parts» mechanical design.
-
Product
Automatic Flight Inspection System
AT-920DG
-
Airfield Technology is pleased to announce the availability ofa new product, the AT-920DG Automatic Flight InspectionSystem.The new AT-920DG system combines the unique groundbasedinspection capability of our original AT-920 with theproven DGPS positioning system and WinFIS flight inspectionsoftware from our larger, dual equipment AT-930DG system.
-
Product
Appearance Inspection
-
We perform quality assurance agency of customers' important products through inspection.
-
Product
End Face Inspection
-
Cleave quality inspection. High precision interferometers for checking the end face quality of cleaved optical fibers and for cleave process optimization. Crisp and clear fringe patterns and software with advanced measurement functionality. Ideal for use in production settings and when working with difficult to cleave fibers in laboratory environments. Fiber holder adaptors available for use with cleavers and splicers from the major splicer manufacturers. This facilitates easy transfer of the fiber from cleaver to interferometer and then onto the splicer with no need for reclamping.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type K, Ø1.50mm, 230gf
K100-K150230-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style K, Tip Diameter Ø1.50mm, Spring force 230gf, Steel with Gold Plating.
-
Product
High density, ESA approved PCB connector
KMC Series
-
Smiths Interconnect's KMC series is an ESA qualified, high density board to board and board to wire interconnect available in multiple configurations from 26 to 162 positions
-
Product
ITA, G18, 18 Module With Discrete Wiring And PCB Capability
410120101
ITA
ITA, G18, 18 Module with Discrete Wiring and PCB Capability
-
Product
Battery Inspection
-
We design, develop and manufacture X-ray solutions specifically for battery cells. At Exacom we stand for passion, innovation, out of the box thinking, honesty and reliability, as well as speed and a hands on mentality.
-
Product
Vison Inspection System
-
High Speed stroboscopic 2D vision inspection system for die attached and wirebond quality in back-end semiconductor processes. User friendly HMI for easy recipe creation and management. Able to configure with various defect identification module. (Strip Mapping, Inker, Scriber, Pucher, Bristle, Laser wire cutter and Laser clip bonding cutter.)
