Product

16 Discrete/Switch I/O Channels (±80 V, 625 mA/Ch.)

DT2

-

North Atlantic Industries

DT2 - North Atlantic Industries

The DT2 module features 16 independent, isolated, programmable channels that can be used for input voltage measurements (±80 V), or as a bi-directional current switch (up to 500 mA per channel). When programmed as a switch with the switch closed, both the current through the switch and the voltage across the switch can be monitored. These modules include diode clamping on each channel. Clamping is useful for inductive loads, such as relays and short circuit protection.

Product

Rad Hard Switching Controllers

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas' high-performance, radiation hardened PWM controllers are suitable for a wide range of power conversion applications including boost, flyback, isolated output configurations, and voltage or current mode switching power supplies.

Product

Curve Tracer

CS-3000 Series

-

Scientific Test, Inc.

CS-3000 Series - Scientific Test, Inc.

CS-3300 / CS-3200 / CS-3100 three model line-up. Maximum peak voltage: 3,000V (high-voltage mode for all models) in CS-3000 Series.Maximum peak current: 1,000A (CS-3300 high-current mode). The CS-3000 Series are CE-marked and UL listed.

Product

Semiconductor Test System

-

IST Information Scan Technology, Inc.

IST Information Scan Technology, Inc.

As power modules age, their performance degrades. Proper testing and maintenance of semiconductor devices used in power switching can ensure optimal performance and prevent down-time throughout a device’s lifecycle. The IST Model 8900 Series Discrete Semiconductor Test Systems allows you to effectively identify the percent of degradation in semiconductor devices by simulating the exact current and voltage of the parameters used by devices under real operating conditions.

Product

High AC Current Capacitor

LC1/LC2/LC3-AN

-

HK Film Capacitor Ltd

LC1/LC2/LC3-AN - HK Film Capacitor Ltd

Induction Heating Processing Equipment, High Current Welding, High Power Resonant Circuits, Motor Controls; Oscillating, Bypass, Coupling circuits, High AC Current applications, High-Frequency AC Filter and Medium Frequency Power applications.

Product

Single Channel Potentiostats

12XX Series

-

Ametek Scientific Instruments

12XX Series - Ametek Scientific Instruments

The 12xx Series Potentiostats has two current models:  the 1287A and 1280Z.  This family of potentiostats communicate through trusted GPIB interface technology that can convert to USB for easy connection modern computers.  The Solartron Analytical 1287A and 1280Z are often driven by CorrWare software for DC testing, such as Cyclic Voltammetry, and ZPLOT for AC testing, such as Electrochemical Impedance Spectroscopy.

Product

Motor Driver ICs

-

STMicroelectronics

STMicroelectronics

The ST product portfolio offers a wide range of motor control ICs, well-suited for the most demanding automotive environments, covering the requirements of brushed DC motors, stepper motors and brushless DC motors, over an extensive range of voltage and current ratings. Efficiency and accuracy of our motor drivers are guaranteed by a unique combination of low-loss PowerMOS output stages and advanced control circuitry. Robustness and reliability are provided by the integration of a comprehensive set of protection and diagnostic features.

Product

Hall Sensor Board with I2C Interface

048-368

-

ELMA Electronic, Inc.

048-368 - ELMA Electronic, Inc.

Version: +5V/60A +5V/60A +3,3V/25A +12V/25A The Hall-Sensor Board is the right accessory for your system in combination with the Elma SysMon. It's possible to measure up to 4 currents and to monitor them with the Elma SysMon 3 Gen.

Product

2000-6000W AC power source

CX-P2KW

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-P2KW - Shenzhen Chuangxin Instruments Co., Ltd.

The AC power source is made by adopting microcomputer processing chip and high power device. It provides a stable pure sine wave and has voltage, over current, over temperature, overload protection. It can output 0-300V adjustable voltage, and 45-70Hz adjustable frequency as well as fixed frequency as 50 Hz or 60 Hz, 100 Hz and 200 Hz and 400 Hz. This AC power source can simulate power grid of different countries, provide a stable voltage, frequency, waveform which can be used to test and age the exprot products and provide kinds of precision tests for laboratory, measuring room, etc.

Product

Clamp Meters

-

Sanwa Electric Instrument Co., Ltd

Sanwa Electric Instrument Co., Ltd

An electrical tester that combines a basic digital multimeter with a current sensor. Clamps measure current. Probes measure voltage.

Product

Bipolar/FET/Diode Dual Head Production Test System

36XX

-

FETservice, Inc

36XX - FETservice, Inc

Two test stations on the 3600E and 3601E systems. Performs DC, AC, and pulsed tests. Excels at evaluating difficult to measure parameters on zeners, current limiters, varactor tuning diodes and darlingtons. 24 bin opto-isolated handler/prober interface. Parallel first-in first out computer to tester interface for maximum throughput. Parallel testing with a 3602E or 3603E allows shared test execution for extremely high throughput applications when interfaced to high speed handlers with multiple test sites.

Product

Scanning Electrochemical Microscope

VS-SECM (DC And AC)

-

Ametek Scientific Instruments

VS-SECM (DC And AC) - Ametek Scientific Instruments

The SECM integrates a positioning system, a bipotentiostat, and an ultramicroelectrode probe or tip. The positioning system moves the probe close to the surface of the sample, within the local imaging zone. The bipotentiostat can polarize the probe only (feedback mode) or the sample and the probe independently (generator-collector mode), while measuring the resulting current(s). The probe is specially designed to have a specific tapered polish (per the RG ratio) and active radius below 100 microns. The positioning system scans the probe and charts position with measured electrochemical parameters, creating a data map of local current.

Product

Battery Data Logging Device

FST-AM

-

Foresight Electronics Co., Ltd.

FST-AM - Foresight Electronics Co., Ltd.

A data logger, is an electronic instrument that records measurements at set intervals over a period of time. Depending on the particular data logger, measurements can include: air temperature, relative humidity, AC/DC current and voltage, differential pressure, time-of-use (lights, motors, etc.), light intensity, water temperature, water level, dissolved oxygen, soil moisture, rainfall, wind speed and direction, leaf wetness, pulse signals, room occupancy, plug load, and many more.

Product

IC/BGA Tester

Focus-2005

-

Kyoritsu Testsystem Co., Ltd.

Focus-2005 - Kyoritsu Testsystem Co., Ltd.

As a screening checker to detect defective devices(mainly electrostatic destruction)which are returned from fields before failure analysis process of IC/LC in the quality assurance division of semiconductor manufacture.As a screening checker to detect defective devices before acceptance inspection by IC/LSI expensive tester at semiconductor company(trading, manufacture)Short/Open checker for semiconductor sensor device.It is possible to measure two kinds of measurements which are constant voltage biased current measurement and constant current biased voltage measurement. User can set the threshold of 10 ranks. （auto measurement）Only device can be measured. It is also possible to fabricate the test fixture.Various devices can be measured by replacing the socket board.It is no need to generate complex test programs as reference values are calculated from good device.It can be expanded by adding multiplexer boards which are 128pins per one board.(MAX 2048pins)

Product

Handleld LCR Meter

TH2822C

-

Changzhou Tonghui Electronic Co., Ltd.

TH2822C - Changzhou Tonghui Electronic Co., Ltd.

With its advanced impedance test technology, Tonghui has launched TH2822 series handheld LCR meters. This series currently possess the most powerful functions and outstanding performance in this industry comparable with bench LCR meters. Meanwhile it is the achievement of Tonghui after years of efforts and research in the passive-component testing field.

Product

Material Analysis Laboratory

-

Element

Element

Trialon’s world class Material Analysis Laboratory consists of state-of-the-art equipment and experienced staff. Our specialty is to determine failure analysis of design, material, process and root cause in both current and future products across multiple industries.

Product

Electronic Loads

Series EL

-

Kepco, Inc.

Series EL - Kepco, Inc.

The EL Series is a line of modular aircooled, DC electronic loads used to test power sources such as batteries, power supplies, generators, chargers, fuel cells, etc.Power ratings start at 1KW; standard models have maximum test capabilities of 50, 200, 400 and 600 volts. High current and power operation are achieved via parallel connection in a master/slave configuration. Individual modules are capable of up to 5KW and 800 amperes.