Product

Benchtop Wiring Analyzer

2115

-

DIT-MCO International

2115 - DIT-MCO International

The Model 2115's compact size makes it the ideal choice for many benchtop or portable test applications. The small size does not mean you sacrifice any functionality. The 2115 delivers a full 1500 volt isolation and 2 amp continuity test stimulus. With the optional AC breakdown test providing 1000 VAC test stimulus, you will meet all test requirements.

Product

Trailer Buddy 4/5 Pin One Man Trailer Wiring Tester

220

-

Electronic Specialties Inc.

220 - Electronic Specialties Inc.

*Tests 4 & 5 Pin Flat connector wiring *Each signal from vehicle emits a unique tone *Loud beep can be heard over shop noise *One person makes complete test in 30 seconds! *Just apply brakes, turn signals, running lights& engage reverse *Tester also emits unique tone for any shorts in the wiring! *Greatly reduces time spent verifying vehicle trailer wiring *Very simple & easy to use - saves time!

Product

- RS-232 to RS-422/RS-485 Concentrator - Wiring Hub

Model 290

-

Telebyte, Inc.

Model 290 - Telebyte, Inc.

FEATURES: Break RS-485 Limit, Expand to 496 Nodes 16 Port Capacity; Each Port Settable to RS-422 or 2 Wire RS-485; Provides Isolation Between Ports; All Ports Surge Protected; Increased System Reliability. The Model 290 RS-232 to RS-422/RS-485 Concentrator offers a unique group of features for those applications using RS-422 and/or RS-485 for communications between a multiplicity of devices.

Product

Wired SIM Solutions

-

Virginia Panel Corporation

Virginia Panel Corporation

VPC's Snap-In-Modular (SIM) inserts offer multiple protocols, but share the same footprint, making them all compatible with VPC's 90 Series SIM module, iSeries SIM module, and i2 MX SIM model.SIM Infinity® inserts revolutionized the way PCB connections were made to the board with pass-thru technology and the ability to intermix multiple protocols in one module. SIM wired inserts expand that technology by offering even more protocols including micro coax, micro power, QuadraPaddle and VTAC; and coming soon, 20/26 GHz coax.

Product

Wire Mount Testers

-

Holding Informtest

Holding Informtest

Is designed to measure and control the DC resistance, electrical capacity, insulation resistance of electrical circuits and check the electrical insulation strength of electrical circuits.

Product

Super-Safeway Three Wire & GFCI Circuit Tester

1301270003

-

Molex, Inc.

1301270003 - Molex, Inc.

Super-Safeway Three Wire & GFCI Circuit Tester, 3 Indicating Lights, Push to Test Button

Product

4-Wire Resistance Measurement | Continuity & HiPot Cable & Wire Harness Testers

-

CAMI Research Inc.

CAMI Research Inc.

An add-on option for the CableEye HVX high voltage cable tester series that permits expanded testing for contact and wire resistance as low as 1 mΩ. After checking for opens, shorts, miswires, and resistance limits, the 4-wire Kelvin measurement applies a user-selectable test current from 10 mA to 1 A to determine connection resistance within 1 mΩ. The resistance profile of a model cable may be stored and used as a basis of comparison during later testing to reveal cold solder joints, faulty crimps, recessed pins, pin contact contamination, improper wire gauge, and stress-extruded wire.This option may be purchased with any new HVX tester, or added as an upgrade to any of your existing HVX testers.

Product

IEC60695-11-2 Single Wire And Cable Vertical Burning Tester

CX-D12

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-D12 - Shenzhen Chuangxin Instruments Co., Ltd.

It’s strictly designed according to IEC60695-11-2, IEC60332-1, GB/T18380.11-2008, GB/T18380.12-2008 etc. Stainless steel screen with a sliding burner handle support for approaching or movingback the flame from the sample under test according to the CEI standards for test on cables.

Product

Probes With Lead Wires

-

Omega Engineering, Inc

Omega Engineering, Inc

Used when the probe is installed some distance from the logger, controller, or other data acquisition device. Available in a variety of lead wire types with stripped leads or connectors attached.

Product

I/O Wiring Cable

PCL Series

-

Advantech Co. Ltd.

PCL Series - Advantech Co. Ltd.

I/O wiring cable sets are designed for easy field wiring capabilities. The PCL-1050 I/O wiring cable series can be used with multiple I/O cards.

Product

Drawing Die And Wire Measurement

Drawing Die Inspector DDI

-

Optik Elektronik Gerätetechnik GmbH

Drawing Die Inspector DDI - Optik Elektronik Gerätetechnik GmbH

Special microscope setup for visual inspection of wire drawing dies.

Product

Automatic High Voltage Wire Harness Testers

-

MK Test Systems Ltd.

MK Test Systems Ltd.

Automatic high voltage wire harness testers are used in a variety of industries, such as aerospace and defence through to rail, and are used to test any equipment which contains a high number of electrical wires, or active components ensuring these pass specified test criteria at the sub-assembly and final stages of construction. These systems ensure the wiring and components are 100% compliant and undamaged, recording every test measurement and aiding diagnosis of detected faults.

Product

Wiring Boxes

-

Seitron

Seitron

Radio receiver for heating / cooling systems equipped with an integrated antenna, an output with SPDT relay and an RS485 Modbus® RTU slave communication port.

Product

Wire Damaged Tester

WDT-1

-

Lisun Electronics Inc.

WDT-1 - Lisun Electronics Inc.

This equipment is designed and manufactured according to corresponding regulation in standard IEC884-1, GB299.1-96, GB16915.1-97 and other electronic accessories relevant standard. Mainly used to test damage degree of fixed connection components lead wire of with thread clamping type and no screw terminals, so as to inspect whether it can withstand mechanical stress during normal use.Specification: • Power supply: AC220V 50Hz • Test rate: 10±2r/min (GB16915.1-97: 12 ±1r/min) • Rotating radius: 100mm • Test distance: 250~500mm adjustable • Test numbers (Number of rotating): 0~999999 any set • Mass: 0.3KG, 0.4KG, 0.7KG, 0.9KG, 1.4KG, and 2.0KG (GB16915.1-97: 30N, 40N, 50N, 60N each of 2 pcs) • Stations: 2 • Dimension: 1200×1400×400 (mm) • Remarks: The mass and rotating radius can be optional as per customer requirements.

Product

One Wire Communication Board

MS 1727

-

Meltronics Systemtech

MS 1727 - Meltronics Systemtech

- Digital serial bus communication with low speed data over a single line, Both signaling and driving power over a same single signal.- Protocol used in small inexpensive devices. Such as digital thermometer, weather instruments, laptop sub module, authenticate system and some cell phone battery packs.- Always master only initiates the communication and in overall in charge of the network.- Bus communicates with master and slave at a low data rate of 12kbps.- All terminals in the network are communicating by half-duplex mode.- Maximum of 255 nodes in each 1-wire network- Each data transaction will start with 480micro second low RESET pulse.

Product

DB37 DIN-Rail Wiring Board

ADAM-3937

-

Advantech Co. Ltd.

ADAM-3937 - Advantech Co. Ltd.

Low cost universal DIN-rail mounting screw terminal module for DAQ cards with DB37 female connectorCase dimensions (W x L x H): 87.2 x 112.5 x 51 mm (3.4" x 4.4" x 2.0")To Be Used With PCI-1713U, PCI-1715U, PCI-1718HDU, PCI-1720U, PCI-1730U, PCI-1733, PCI-1734, PCI-1750, PCI-1760U, PCI-1761

Product

3 ft Coax Wire with a Coax Pin

GX96411

-

Marvin Test Solutions, Inc.

GX96411 - Marvin Test Solutions, Inc.

One 3 ft Coax Wire with a Coax Pin Crimped on One EndRequires the GX96409 connector housing.

Product

Fine Wire Versatile Thermocouples ANSI

-

Labfacility Ltd.

Labfacility Ltd.

An exposed junction thermocouple is the simplest form of thermocouple. It consists of two pieces of thermocouple wire joined together with a welded bead. Since they can be made very small, an exposed junction thermocouple can provide a very fast response time.

Product

Intelligent Tangent Delta Tester of Enamelled Wire

TD-8S

-

Shanghai Dean Electrical Co., Ltd

TD-8S - Shanghai Dean Electrical Co., Ltd

·Tangent Delta Tester is used for testing the curing degree of enamelcover. The curve variation of tgδ shows the curing degree of enamelled wire directly, then adjust the heating temperature of enameling oven, to get a optimal curing degree of enamelled wire, control the wire quanlity effectively.·The temperature class of enamelled wire can be tested rapidly; the enamel type of wire can be determined preliminarily.

Product

Locators: Cable, Wire & Valve

-

Armada Technologies

Armada Technologies

Locators: Cable, Wire & Valve by Armada Technologies

Product

Wire Harness Tester

Panther4HT Master- Slave DSU

-

Qmax Test Technologies Pvt. Ltd.

Panther4HT Master- Slave DSU - Qmax Test Technologies Pvt. Ltd.

The Master- Slave DSU based Panther4HT Wire Harness tester is designed for testing and verifying electrical connections in a cable, harness, backplane or any other wired assembly. It offers unique Qmax MASTER - Slave concept and SATELLITE UNIT Options to avoid looping back of cable to the ATE. All Satellite Units communicates the measurements through LAN interface which is very useful for on-board applications in Aircrafts / Ships and similar applications where large cable looms are used. This innovative concept will eliminate the long adapter cables and hence storing, maintaining and re work of these kind of cables are avoided. Furthermore single Master Controller Unit (MCU) is used to control not only all the satellite units , but also communicate with all satellite units through Ethernet Communication port. A single reference Cable is used to link the all the satellite units with the Master Controller in controlled loop manner is a value add to the product.

Product

Hipot Wire Harness Testers

NX Hipot

-

Dynalab Test Systems, Inc.

NX Hipot - Dynalab Test Systems, Inc.

* 50 to 1500VDC Hipot Testing* 50 to 1000VAC (optional) * 5Mohm to 1Gohm Insulation Resistance * Simple 4-button user interface * Tests for continuity and shorts * Tests a variety of components * Precision resistance measurements * Continuous high speed scanning for real time complete status information of harness assembly progress * Keyed security access and control * Built for rough industrial environments * 2 serial ports for connection to printers and scanners * Standalone operation * Uses a high capacity memory card * Available from 64 to 1024 test points * Networkable

Product

Thermocouple Wires & Connectors

-

MRC ltd.

MRC ltd.

Is designed for sensor manufacturers for the production of commercial grade thermocouple junctions, and for users of large numbers of exposed junctionthermocouples such as test & development laboratories where multipoint temperature sensing of test pieces is required.