X-ray
Electromagnetic Spectrum whose radiation wavelength is 1 nm - 1pm and frequency (Hz) ranges between 10 to the 17th and 10 to the 20th power.
See Also: X-ray Systems
-
Product
High Voltage
-
A comprehensive range of high voltage power sources are available from ETPS. Product families range from programmable high precision laboratory power supplies to HV Cassettes and PCB modules. The flexible high voltage design platforms and responsive management structure enable us to offer an economically viable custom build. High voltage power supplies from ETPS are used in a variety of applications ranging from electron acceleration systems and mass spectrometers to magnetrons, x-ray and nuclear research.
-
Product
Real-Time X-Ray Imaging and Variable Pressure Scanning Electron Microscope
-
Trialon has the equipment and experienced staff to operate this highly technical piece of laboratory equipment. Our state-of-the-art materials analysis lab located in Auburn Hills, MI is managed by a Ph.D with over 20 years of hands-on experience in root cause failure analysis of design, material and process for current and future products.
-
-
Product
Energy Dispersive X-ray Fluorescence Spectrometer
Pharmaceutical Elemental Impurities Analysis System
-
Control of Elemental Impurities in Pharmaceuticals In the pharmaceutical industry, the analysis of elemental impurities is necessary to ensure the safety of pharmaceuticals. In December 2014, the "Guideline for Elemental Impurities" (Q3D) was issued by the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH), consisting of representatives from Europe, the U.S. and Japan. In Japan, the "Guideline for Elemental Impurities in Drug Products" (PFSB/ELD Notification 0930 #4 from the Ministry of Health, Labour and Welfare) was issued, and will be applied to new drug products submitted for approval after April 1 2017. For 24 elements categorized in Class 1 to Class 3, residual quantities in pharmaceutical drug products must be controlled within permissible limits. Although ICP-AES and ICP-MS are used for precise analysis of elemental impurities, X-ray fluorescence spectrometers can be used as an alternative analysis method. This is because they can quantitatively and qualitatively analyze a variety of elements nondestructively, and without chemical pretreatment, unlike ICP-AES and ICP-MS systems. The X-ray fluorescence spectrometry has been adopted as a general method of analysis in the U.S Pharmacopeia and the European Pharmacopoeia. (USP<735>, Ph.Eur.2.2.37)
-
Product
X-Ray Preamplifier Power Supply
-
The X-ray Preamplifier Power Supply (XPPS) provides power for 50 or more preamplifiers. The 19-inch rack-mount or benchtop unit contains linear power supplies that generate +/-12V @ 5.1 Amperes and +/-24V @ 3.6 Amperes, with very little noise.
-
Product
X-Ray Inspection System
TruView™ Fusion
-
The quality of your products is paramount to the success of your business. The TruView™ Fusion X-ray Inspection System allows you to "see inside" your products without destroying them, enabling unprecedented understanding of your manufacturing process. The TruView™ Fusion X-ray is the right solution if you are looking for a radiography system to inspect medical devices, printed circuit boards, electronic components, and mechanical parts.
-
Product
Analysis System
Neptune (EDS-WDS)
-
By integrating Energy Dispersive Spectroscopy (EDS) and Wavelength Dispersive Spectrometry (WDS) analytical techniques on a single platform, Neptune provides the power and flexibility of EDS with the resolution, precision, and detection limits of WDS. Together the two techniques extend X-ray microanalysis capabilities and provide solutions to the most challenging analysis problems. Each technique can be used independently or the data can be integrated to provide results which were previously unachievable.
-
Product
Detector Subsystem
Aurora CT
-
Aurora CT is the industry’s first off-the-self detector subsystem for security CT applications. The plug-and-play-type solution includes ready-made, multislice detector boards, a control unit and a software library. Aurora CT speeds up time-to-market and decreases total costs of X-ray imaging systems that meet the most stringent security equipment standards in aviation.
-
Product
Gratings for Synchrotron, FEL and EUV Light Sources
-
HORIBA Scientific holographic lamellar gratings exhibit ultra-low grooves roughness and unique efficiency uniformity making them ideal for Synchrotron, Free Electron Laser (FEL), EUV or Soft X-ray light sources.
-
Product
Microwave Moisture Meter
RX-95
-
The system works based on the absorption of microwave energy by water molecules contained inthe x-rayed material. It is a non-contact, non-destructive method of instant measurement of water content - used for materials such as coal, flour, grain, cement, seeds, sugar, etc. Thanks to high measurement sensitivity (resolution greater than 0.01% of water content by weight), short measurement time (about 5 times/sec.) and repeatability of measurement - the system is suitable for continuous measurement of material moisture, e.g. on conveyor belts and its recording on a PC or using a 4-20 mA current loop.
-
Product
Medical Imaging
-
Teledyne e2v has over 35 years of experience in the medical field and offers medical devices companies a range of CCD and CMOS image sensor solutions and services. We understand the challenges facing the healthcare landscape (including ageing populations and the management of healthcare spending), and through close partnerships with our suppliers, are able to offer customers agility and flexibility over our entire supply chain. This enables us to provide our customers with a fully comprehensive digital imaging solution. We also produce and sell an X-ray intra-oral dental product named Demoniac, which is compliant with ISO 13485.
-
Product
Scientific CCD Image Sensors
-
Our front and backside illuminated (BSI) and backthinned Charge Coupled Devices (CCDs) are seen as the gold standard for scientific and quantum imaging in applications in spectroscopy, microscopy, In vivo, x-ray and astronomy. We understand that every imaging application is unique and requires our engineers and scientists to work closely with our customers providing highly tailored imaging solutions.
-
Product
Medical And Dental X-Ray
-
Teledyne DALSA offers powerful, innovative CMOS X-Ray detectors combining industry-leading performance with cutting-edge features for applications such as orthopedic and surgical radiology, mammography, intra- and extra-oral dental radiology, CT, and bone densitometry
-
Product
X-ray Fluorescence Sulfur-in-Oil Analyzers
SLFA-2100/2800
-
The SLFA-2100/2800 are designed specifically to meet the recent demanding needs of measuring the new low sulfur fuels, diesel and RFG.Using the X-ray fluorescence technique, fast and accurate measurements can be carried out in compliance with the ASTM D4294 method, either in the lab or in the field.
-
Product
Quantitative Analysis Software
Electron Probe X-Ray Analyzer (EPXA)
-
The software runs on standard PC’s and operating systems (Windows XP and later). Complete ZAF analysis is possible, with or without standards, using an internal database of fundamental parameters (FP) such as absorption coefficients, fluorescence yields, transition probabilities, etc. There is also an integrated spectrum display.
-
Product
XRF
O Series
-
The O Series combines high performance with a small x-ray spot size. This is made possible by the poly-capillary focusing optics system that replaces the collimator assembly installed in standard Bowman systems. The optics are designed to focus the x-rays coming from the tube exit window to a very small spot size (80μm FWHM) while retaining virtually 100% of the tube flux. So instead of attenuating the x-rays that can’t fit through the small apertures, as is the case with collimator systems, the poly-capillary optics assembly allows almost all of the x-rays from the tube to reach the sample. The result is much greater sensitivity for testing very small components or thin coatings. Shorter test times can achieve even better repeatability when comparing optics systems vs. a similar sized collimator.
-
Product
Crystallographic Imaging Software
GrainMapper3D™
-
The GrainMapper3D software provides non-destructive 3D crystallographic imaging through LabDCT™ on the ZEISS Xradia 520 Versa X-ray Microscope made for laboratory use.
-
Product
In Situ Diagnostics
-
For researchers working on ultra thin films and novel interfaces, Neocera offers insitu, real-time process control and diagnostic tools such as high-pressure RHEED, Low Angle X-ray Spectroscopy (LAXS) and Ion Energy Spectroscopy (IES). RHEED provides exceptional growth control via RHEED intensity oscillations and the Structural data via diffraction. LAXS is a complimentary to RHEED and provides real-time Compositional information. IES provides energetics of the laser generated plasma plume which is directly responsible for obtaining high quality films and interfaces.
-
Product
Benchtop Small Angle X-ray Scattering (SAXS) Instrument
NANOPIX mini
-
Non-destructive measurement of particle size and size distribution.Rigaku NANOPIX mini is the world’s first benchtop small angle X-ray scattering (SAXS) system that is engineered to deliver automatic nanoparticle size distribution analysis for both quality control (QC) and research and development (R&D) applications. Nanoparticle size, size distribution, and particle shape are the key pieces of information obtained from SAXS. Samples may range from solutions, suspensions or slurries to solid plastics, rubbers or polymers.
-
Product
Universal Offline AXI Systems
AXI XT-6 Series
-
The XT-series provides the advanced inspection capability of Nordson TEST & INSPECTION's inline system in a smaller footprint manual load/island of automation system. The platforms are designed for flexibility and ease of use for a wide variety of products requiring 2D and 2.5D automated X-ray inspection. The XT-6/XT-6A platform is a highly flexible automated X-ray inspection system with minimum footprint and a parallel-kinematic Hexaglide manipulation unit for extreme-angle off-axis image acquisition with high resolution. It is suitable for high-quality X-ray analysis of electronic assemblies and material analysis of parts that require flexible part manipulation with multiple inspection angles. For batch modes and volume inspection the XT-6 can be equipped with a single-sided conveyor setup and magazine load/unload station (XT-6A).
-
Product
High-speed In-Line 3D CT Inspection System
X-eye 6300
-
Automatically inspects the defects of products in customer's line with high-speed 3D CT tomography.Able to inspect every defects of Double-sided PCBA & BGA mounted components precisely by solving overlapped X-ray image issue.Inspection speed of 3 sec/1FOV from loading to automatic Good/NG judgement.
-
Product
Constant Potential Generator Power Supply Mains
CP225D
-
Supplemental to its outstanding penetration capacity (up to 47 mm for steel in just 10 minutes), the CP225D includes a built-in multiple X-Ray output carrousel that features a Beryllium window for the inspection of lighter alloys such as aluminum and carbon fiber. The CP225D is one of the most versatile generators on the market and will adapt to an extremely wide variety of applications. In fields as diverse as the construction or petrochemical industries, its power and small focal spot, light weight, compactness and high penetration capacity will be much appreciated.
-
Product
Platform
AXM XM8000 Wafer
-
The complete solution for operator free, automated X-ray wafer metrology. XM8000 is specifically designed for inline use in clean room environments.
-
Product
Bulkflow X-Ray Inspection System
-
Designed to be integrated into line with optional reject stations, the Bulkflow X-ray System is perfect for loose and free flowing products. Offering a good detection levels on a wide range of contaminants including all metal, bone, glass and dense plastics.
-
Product
X-ray Fluorescence Measuring System
FISCHERSCOPE X-RAY/XDV-SDD
-
Premium model for universal use for the inspection of very thin or complex layers up to RoHS screening at very low detection limits.
-
Product
X-RAY Cameras Based On CCD
XiRAY
-
*High resolution direct phosphor imaging, ideal for Micro CT*Ultra-low readout noise with CCD and especially the new sCMOS sensors*Crystal clear 14 bit/pixel images*Partial readout and binning modes for enhanced sensitivity and higher speed*Non-linearity over full dynamic range <2% (of full scale) to 95% of full scale*External triggering, LVTTL*Low power consumption 6 Watt with Cooling or 2W without*Antiblooming, Enhanced Statistical Extra-Mural Absorption*Radiation hardened, Support of Energy levels 7 to 100keV*Measures just 63 x 63 x 46 mm*Peltier TE Cooled with Heatsink and optional fan
-
Product
Radiation Dose Testers
-
Handheld Radiation Dose Tester with high sensitive GM counter sensor, combined Beta(β ), Gamma(γ), and X-ray radiation detection. It is widely used in home decoration, radiation processing enterprise, health and epidemic prevention, radiation therapy, import and export inspection, building materials, petrochemical, geological survey, scrap steel, industrial nondestructive testing and other environments existing ionizing radiation, personal radiation dose supervision and protection occasions.
-
Product
Radiation Survey Device
DRG-T
-
The DRG-T radiation survey device is designed for use in special-purpose vehicles for continuous control and measurement of exposure dose rate (EDR) of gamma and X-ray radiation, as well as for providing audio and visual alarm of its dangerous levels and for issuing commands to start the actuators of protection equipment.
-
Product
Entry-level X-ray Inspection System
X-eye 5100 Series
-
100kV ~ 130kV Micro-focus Closed tube and high-definition Flat Panel Detector are installed and high-resolution image can be gained.Customer convenience is primarily considered in operation and maintenance of the product.Customization is available because it is specially designed to be add up any necessary functions depends on customer needs with reasonable prices.
-
Product
Basic Digital Systems
-
The Medical Imaging System can be configured simply by installing the FCR Reader, the CR Console, and the Imager to your existing X-ray equipment. The Imager uses the dry film for output and therefore does not require a dark room as in conventional systems thus saving space. Also, the scanned image can be digitally saved to media and not on films, thus not much storage space is required.
