Product

Sensor Products: Weld Force Probe Auditing System

90061-XH Series

-

HITEC Sensor Solutions Inc.

90061-XH Series - HITEC Sensor Solutions Inc.

This system is ideal for field measurement and data logging of forces between the tips of resistance spot welders. The system consists of a handheld sensor and portable readout/ data logger (PMAC 2000).

Product

Atomic Force Microscope

Flex-Mount

-

Nanosurf

Flex-Mount - Nanosurf

Flex-Mount is a unique AFM that can be configured to acquire high-resolution information on large, non-planar and demanding samples. The Flex-Mount solution combines the superior resolution and performance of the Nanosurf FlexAFM scan head with the integrability of the Nanosurf NaniteAFM.

Product

Motorized Force Test System

MT Series

-

Qualitest International Inc.

MT Series - Qualitest International Inc.

In the past, film extruders, paper producers, converters, and woven/non-woven fabric producers have had the choice of test stands and universal test machines which are either value-priced peak-force-only machines, or expensive computer-operated integral-load cell machines. Now you can have the best of both worlds in a single instrument. The series MT-1500, a simple to use computer operated tester, with Quality Control software for automatic calculation and graphical display of break, elongation, yield, modulus, and other, tension and compression force information.

Product

High-Excitation-Force Water-Cooled Range

K-series

-

IMV Corporation

K-series - IMV Corporation

K-series, high excitation force water cooled vibration simulating test systems fully developed by IMV.Advanced performance from the K-series will significantly improve the test environment.

Product

Digital Pressure Gage

DPGA

-

Dwyer Instruments Inc.

DPGA - Dwyer Instruments Inc.

The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases

Product

Bore Gages - Electronic

-

Fowler High Precision, Inc.

Fowler High Precision, Inc.

Measure internal diameters and bores. Data output options available including Bluetooth.

Product

High Force Large Area Bond Tester

Sigma HF

-

Xyztec

Sigma HF - Xyztec

- For high force and large area- Typically for IGBT, power modules and batteries up to 1000 kgf- High axis speed- Deep access up to 80 mm- SEMI S2 safety cabinet with visual feedback- Flexible positioning of multiple work holders

Product

IEC60884 Fig20 Flexible Cord Retention Force Test Apparatus

IEC60884 Fig20

-

Shenzhen Chuangxin Instruments Co., Ltd.

IEC60884 Fig20 - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60884 Fig20 Flexible cord retention force test apparatusMeet the standard: GB2099.1-2008 Article 23.2 and Figure 20, IEC60884 Figure 20, VDE0620 Uses: It is used to check whether the plug wire and the electrical accessory are firmly fixed. Sample range: detachable plug, detachable mobile socket, non-removable plug and non-removable mobile socket

Product

3-Component Quartz Force Rings

260 Series

-

PCB Piezotronics, Inc.

260 Series - PCB Piezotronics, Inc.

Three-component quartz force ring sensors are capable of simultaneously measuring dynamic force in three orthogonal directions (X, Y, and Z). They contain three sets of quartz plates that are stacked in a preloaded arrangement. Each set responds to the vector component of an applied force acting along its sensitive axis. 3-component ring force sensors must be statically preloaded for optimum performance. Preloading provides the sensing elements with the compressive loading required to allow the proper transmission of shear forces. Versions are available with ranges up to 10k lb (45k N) in the z-axis (perpendicular to the top surface), and up to 4000 lb (18k N) in the x-and y (shear) axes. Both ICP® and charge output styles are available.

Product

Full Bridge Thin Beam Force Sensors

TBS SERIES

-

Transducer Techniques, Inc

TBS SERIES - Transducer Techniques, Inc

The TBS Series thin beam force sensors many different parameters found in medical instrumentation, home appliances, process control, robotics, and automotive are exceptionally suited for small load measurements. They are designed to measure and many other high volume applications. A specially developed integrated strain gage includes all balancing, compensating and conductive elements and is laminated to the beam to provide excellent stability and reliability.

Product

Atomic Force Microscope

HDM Series

-

Park Systems Corp.

HDM Series - Park Systems Corp.

The task of identifying nanoscale defects is a very time consuming process for engineers working with media and flat substrates. Park NX-HDM is an atomic force microscopy system that speeds up the defect review process by an order of magnitude through automated defect identification, scanning and analysis. Park NX-HDM links directly with a wide range of optical inspection tools, thus significantly increasing the automatic defect review throughput. In addition, Park NX-HDM provides accurate sub-angstrom surface roughness measurements, scan after scan. Park NX-HDM, together with its industry's lowest noise floor, and its unique True Non-Contact™ technology, it is the most accurate AFM for surface roughness measurement in the market.

Product

Force Sensors

-

Flintec Group AB

Flintec Group AB

Here at Flintec, our force sensor range provides solutions that integrate effectively into a wide variety of industrial applications. They include customized load pins, extensometers, torque sensors and a range of miniature force sensors.

Product

Miniature Quartz Force Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Often the test engineer will try to take low level measurements with a sensors not rated for these low levels. Due to insufficient sensitivity the resulting data may be noisy, hard to analyze or unusable. Using the appropriately sized and ranged PCB Miniature Quartz Force Sensor solves the problem and gives reliable data at a Low Amplitude level. The miniature sensor configuration permits low-amplitude, dynamic compression, tension, and impact force measurements.

Product

Electromagnetic Force Fatigue And Endurance Testing System

EMT Series

-

Shimadzu Corp.

EMT Series - Shimadzu Corp.

High-speed repeated load tests can be carried out with a maximum velocity of 2 m/s, and maximum stroke of ±50 mm, using clean and quiet electromagnetic force as the driving power, without the use of oil. The test space is large so environmental tests can also be carried out using the constant temperature tank (option).

Product

ELECTRIC BRAKE FORCE METER WITH DYNAMIC LOAD SIMULATION AND CIRCUIT TESTING

MDTT9107

-

Matco Tools

MDTT9107 - Matco Tools

*Tests truck-side brake controller output and all towing-lighting functions without a trailer*Displays real-time brake controller output gain and timing*Quickly troubleshoots electrical circuits and ground condition*For use with aftermarket and integrated brake controllers*Microprocessor controlled; simulates trailer brake loads*25' cable allows one-man, in-cab testing of brake controller and all truck-side tow circuits*Use to verify that the vehicle’s adaptive (speed/load sensitive) brake-controller output is functioning properly

Product

Ultimate Shaft Measuring Gage with Laser Interferometer

1200LX

-

Adcole LLC

1200LX - Adcole LLC

The Adcole Model 1200-LX is a high-speed, high-precision gage designed to measure crankshafts, camshafts, pistons, and other cylindrical components in demanding production environments. Simple to operate, with comprehensive, easy-to-understand pass/fail output reports, the Model 1200-LX is vital for verifying part tolerances, minimizing scrap, flagging potential quality issues, qualifying grinders and machining tools, and helping to eliminate quality breaches.

Product

Bond Force Measurement And Calibration Systems

BFS-20

-

F&K Physiktechnik GmbH

BFS-20 - F&K Physiktechnik GmbH

Based on its design and easy handling it can be used also on other brands to measure the bond force.

Product

Carton Force Analyser

CFA

-

Rhopoint Instruments

CFA - Rhopoint Instruments

By measuring the stiffness of the substrate and crease bending resistance the user can optimise cartons for faster running and packaging speeds. The instrument allows individual creases to be analysed identifying problem areas in packaging design or manufacture. Industry research indicates that the packaging speeds of pre-glued skillets is governed by the energy required to open creases. The Hanatek CFA is the first instrument to isolate and accurately measure this key parameter The instrument measures: Bending resistance, bending moment, board stiffness, crease recovery stiffness, crease folding force, crease opening force.

Product

Digital Force Gauge

-

Guangzhou Amittari Instruments Co.Ltd

Guangzhou Amittari Instruments Co.Ltd

The digital force gauge is a kind of simple and convenient multi-functional instrument for high-accuracy push force and pull force test. It is widely used in electronics, building hardware, textile, auto parts, ignition device such as lighter, fire fighting equipment, pen manufacturing, lock manufacturing, fishing gear, chemical, power machinery, scientific research institutions and other industries. For the push and pull load test, plug and unplug force test and destructive test etc.

Product

EHC-09 Ultrasonic Corrosion Thickness Gage - Monochrome

EHC-09

-

Danatronics Corporation

EHC-09 - Danatronics Corporation

Danatronics most popular thickness gages are those in our EHC-09 series. With thousands of units in the field, our durable, custom molded case with raise rubber keypad is IP54 rated and has proven it can handle your toughest jobs (this is bad help fix). The EHC-09 series is available in 6 models to suit every budget and application. What’s best is our simple upgrade path where all gages are capable of quickly and easily (directly from the keypad) adding any software options. Features include a graphic display with multiple languages, vibrate on alarm, fast minimum, echo to echo to ignore coatings, 100K reading Datalogger with export to excel, B-scan and live A-scan with waveform adjust.

Product

4 2/3 Strain Gage Meter

CS2-SG

-

Adtek

CS2-SG - Adtek

CS2-SG Strain Gauge Indicator has been designed with high accuracy measurement, display and communication of DC signal 0~1.0/~4.0mV or 0~10.0/~40.0mV as like as Load Cell or Strain Gauge.The meter supports Field Calibration function. It can be calibrated with sensor(Load Cell/Strain Gauge) to meet machinery structure.They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS-485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of machinery and testing equipments applications.

Product

Magnehelic Differential Pressure Gage

2000

-

Dwyer Instruments Inc.

2000 - Dwyer Instruments Inc.

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential

Product

Precision Line Gage

PLG100

-

Polar Instruments Inc

PLG100 - Polar Instruments Inc

The PLG100 Precision Line Gage system is specially designed for desktop use in order   to measure conductor line   widths, conductor line spaces, arcs, circles and other patterns on the PCB. It can measure a conductor line width less than 1 mil.  The PLG100 system is unbelievably light weighing only 0.73 kg and providing easy mobility