Product

SparkFun Thermocouple Breakout

MAX31855K

-

SparkFun Electronics

MAX31855K - SparkFun Electronics

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one). Once this is achieved, a voltage potential is formed and current flows. The SparkFun Thermocouple Breakout takes a standard Type-K thermocouple in one end, digitizes the temperature measured and sends that data out the other end via a SPI interface, thereby interpreting the data and translating it for you to read!

Product

Test Equipment

Flexible Coil Current Sensor

-

MEET International Ltd.

Flexible Coil Current Sensor - MEET International Ltd.

*Analysis of harmonics, power measurements*Very high-current monitoring*Measuring starting transients of electric motors*Sudden short circuit testing*Arc furnace currents*High-current monitoring of switch-gear and fuses*Data logging*Can be measured by popular multi-meter

Product

Analog Isolator

-

E-Max Instruments

E-Max Instruments

The Analog Optical Isolator module is a single isolated current in / current out or voltage in / voltage out channel of physical separation and electrical isolation for establishing and maintaining the independence of Class 1E equipment from non -Class 1E instrumentation circuits. Input-to-Output isolation has a steady-state isolation capability of 2500 volts AC rms. This isolation will be maintained between:a) input to output signalsb) input to output powerc) output signal to input power

Product

DC Power Supplies

DLM 3-4 kW

-

AMETEK Programmable Power, Inc.

DLM 3-4 kW - AMETEK Programmable Power, Inc.

The Sorensen DLM 3kW and 4kW Series programmable DC power supplies are designed to provide highly stable, continuously variable output voltage and current for a broad range of applications in a compact 2U ( 3½” high) chassis.

Product

Calibrator, Calibrated w/Data, Current, 185 mm, 78 mm, 38 mm

72-6694 CAL D

-

Tenma

72-6694 CAL D - Tenma

The 72-6694 CAL D from Tenma is a current calibrator. It provides quality and accuracy of handheld calibrator of precision current source. It features large LCD display (maximum display counts 1999, 13mm (0.5") digit size). The current calibrator has 006P DC 9V, MN1604/PP3 battery or equivalent alkaline type or heavy duty type power supply. The dimension is 185mm × 78mm × 38mm (7.3" × 3" × 1.5") and weight is 265g/0.58lb (including battery). It has adjustable 0 to 24mA current source, 2 ranges (0 to 19.99mA (0.01mA display resolution, ±(0.25% FS + 1d) accuracy), 0 to 24mA (0.1mA display resolution, ±(0.5% FS + 1d) accuracy).

Product

Eddy Current Dynamometers

WT Dyno

-

HORIBA, Ltd.

WT Dyno - HORIBA, Ltd.

Our WT series eddy current dynamometers are mainly used in the development and testing of all types of prime mover, as well as various engine assemblies. Due to their robust design, which incorporates improved control characteristics, they can be used both as steady state and as transient test stands.Their high speeds for automobile engine testing and their optimised cooling chamber, are convincing arguments that speak for themselves. All WT type dynamometers are suitable for operation in both directions of rotation.

Product

Laboratory EM current meter / water level and wave height meter

-

JFE Advantech Co., Ltd.

JFE Advantech Co., Ltd.

ACM2-RS and ACM3-RS are 2-D and 3-D electro-magnetic current meters for laboratory experiments. The models provide digital output, a high-speed sampling rate and insusceptibility to electro-magnetic noise. ACH-600RS is a highly sensitive capacitance water level meters. With the new system, a maximum of four different sensors can be connected to the compact interface unit, enabling simultaneous recording on a personal computer. Additionally, the system can provide analog output as well as necessary. While conventional water level and wave height meters cannot be used near velocity sensors, our instrument can be as near as 5 cm without increasing noise, due to its special isolated circuit. The result is an innovative system that is capable of achieving highly accurate data.

Product

PRECISION MAGNETICS ANALYZER

3260B SERIES

-

Wayne Kerr Electronics, Ltd.

3260B SERIES - Wayne Kerr Electronics, Ltd.

At the design stage of component development it is vitally important to understand how the component performs under different operating conditions. This might include operation at diverse frequencies, AC drive levels or DC bias currents.

Product

Intelligent Time Reference

TM-4™and TM-4/OEM™

-

Spectrum Instruments, Inc.

TM-4™and TM-4/OEM™ - Spectrum Instruments, Inc.

The Intelligent Reference/TM-4™ and TM4/OEM™ are multi- purpose, GPS disciplined timing signal generators and frequency references in economical off-the-shelf and custom configurations. Intended for use in a wide variety of timing, synchronization and frequency reference applications, they are based on the most advanced architecture Spectrum has ever offered, and include the most popular features of Spectrum's core platform for current timing products.

Product

Automatic Current Tester

77069

-

Gunson

77069 - Gunson

For the rapid safe and accurate testing of DC current on 12v vehicles. The tool plugs straight into the vehicles fuse board and displays the current on the large LCD display. Specification range 0-48volt max 20 amps, 12v battery included.

Product

LED Tester0.3m-2m Integrating Sphere

CX-8000

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-8000 - Shenzhen Chuangxin Instruments Co., Ltd.

Measure Luminous Flux, Luminous efficacy, radiant power, Spectral Power Distribution, Chromaticity Coordinate, Correlated Color Temperature, Peak Wavelength, Dominant Wavelength, Spectral Half Width, Color Rendering Index, Colorimetric Purity, red ratio, Standard deviation of color matching(SDCM), voltage, current, power, power factor, harmonics, and etc. It meets the requirements of CIE standards.

Product

GO-2000 Goniophotometer

-

Hangzhou Everfine Photo-E-Info Co., LTD

Hangzhou Everfine Photo-E-Info Co., LTD

GO-2000 is a highly automated luminaire light distribution performance test system, mainly used for all kinds of indoor lamps, road lamps and floodlights ( add B-β test accessories) light distribution performance test, total luminous flux test and electrical parameters (voltage, current, power, power factor) measurement.

Product

Multi Function Calibrators

-

Seaward Electronic Ltd

Seaward Electronic Ltd

This range of multi function calibrators are designed for accurately simulating various sensor values such as temperature, voltage and current for calibration purposes.

Product

Infrared Imaging Products

-

Dexter Research Center, Inc.

Dexter Research Center, Inc.

We currently offer the SLA32, a 2×16 staggered element silicon-based thermopile array. and the SLA64, a 1x64 element silicon-based thermopile array. . Additionally, development is continuing on future imaging products with integrated electronics. Please contact us with your specific requirements.

Product

Antennas

-

Schwarzbeck Mess Elektronik

Schwarzbeck Mess Elektronik

Is a specialized transducer that converts electric current into electromagnetic (EM) waves or vice versa.

Product

Solid-State And Electromechanical Relay Products

-

Acces I/O Products, Inc.

Acces I/O Products, Inc.

Relay is the name for a switch that is operated electro-mechanically or electronically. Their main task is to make and break connections to control the flow of current in electrical circuits. They’re used for various purposes ranging from validating semiconductors to interfacing low power computers or microcontrollers with high power machinery.

Product

Generator & Earthing Series

-

Kvtester Electronics Technology Co.,Ltd

Kvtester Electronics Technology Co.,Ltd

AC Impedance Tester is the newly developed enhanced impedance tester on the basis of improving and perfecting the old model product. The instrument has three new functions: equipped with rotating mouse to achieve easier operation; display and print AC impedance characteristic curves; achieve data download and editing the test report with PC online. This instrument adopts the most advanced high-speed microprocessor with more powerful function and better performance. It is well established for its high reliability, simple operations, high accuracy and lightweight. Currently the instrument is in leading position in china.

Product

High Density 4MM Reed Relay

Series 120

-

Pickering Electronics

Series 120 - Pickering Electronics

Highest packing density currently available. Switching up to 20 Watts 1 Amp. Choice of 3, 5 or 12 Volt coils. Stacking on 4mm x 4mm pitch. Two switch types are available, a general purpose sputtered ruthenium switch rated for up to 20 Watts, 1 Amp and a low level sputtered ruthenium switch rated at 10 Watts, 0.5 Amps. Release date: 7/11/17

Product

Current Transformers

-

Osborne Transformer Corp.

Osborne Transformer Corp.

The Institute of Electrical and Electronic Engineers defines a current transformer (IEEE Std C57.13) as “a transformer intended to reproduce in its secondary circuit, in a definite and known proportion, the current of its primary circuit with the phase relations substantially preserved”. Its primary winding is connected in series with the conductor carrying the current to be measured or to be controlled and its secondary winding is connected to the measuring, protection or control devices. Osborne designs and manufactures current transformers which are used for instrumentation applications, others which are used for power system synchronizing applications and others which are used in protection circuit application. They have been designed to meet specified current ratios, burden impedance and transformation errors.

Product

Charge Controller

-

Bender Inc.

Bender Inc.

The intelligence of an AC charging station or an AC charging infrastructure is largely determined by the charge controller used. A smart charge controller has the primary task of controlling and monitoring the charging process of an electrical vehicle.The features that characterise a smart charge controller include communication with a backend system and the associated authorisation of users, as well as the efficient distribution of load currents by means of dynamic load management to prevent an overload of the existing AC system.