Product

AWD Dynamometers

MD-AWD-500-AC/EC-100/250

-

Mustang Dynamometer

MD-AWD-500-AC/EC-100/250 - Mustang Dynamometer

The key to designing an AWD dynamometer properly is to understand the methods currently being used by manufacturers in the field of AWD drivetrain technology. A dynamometer that can accommodate various types of AWD vehicle transmissions and wheelbases without excessive complication and, more importantly, without risking damage to a client’s AWD system is paramount. Full time AWD vehicles are designed to provide maximum performance regardless of road conditions. In cases where traction is less than ideal, a vehicle may be designed to improve stability and traction at the expense of power. This means adding torque to a spinning wheel or retarding of timing. In order to properly test an AWD vehicle for peak performance, an AWD chassis dynamometer must be able to simulate ideal road-load conditions to the vehicle. This approach allows the vehicle to be evaluated under “optimum” operational conditions; whereby torque is distributed to the vehicle’s tires in the same manner that would normally occur when a vehicle has equal traction at all four drive wheels, and is therefore operating at peak efficiency. To achieve this, Mustang’s AWD-500 Series incorporates an internal drive system that synchronizes the front and back rollers to simulate a flat, dry road condition. Synchronization, or linkage, insures that the front and rear rollers are always spinning at precisely the same road speed. This process eliminates the possibility of activating a vehicle’s traction control system and also insures that a vehicle’s torque management system is operating under the assumption that the vehicle is not skidding, turning or slipping. Mustang’s AWD-500 can be operated in AWD Mode while testing two-wheel drive vehicles. This process allows the non-driven axle to be spun by the dynamometer rollers at the same speed as the driven axle, eliminating the speed differential that occurs on two-wheel drive dynamometers – problem solved.

Product

AC Clamp Meters

-

Cambridge Instruments & Engineering Co.

Cambridge Instruments & Engineering Co.

A clamp meter is a clothespin-shaped instrument that can be clamped around a live wire in order to measure the current it's carrying. As a measurement principle, clamp meters detect the magnetic field emitted by current flowing in a wire in order to measure the current value.

Product

Digital Multimeter, USB Interface, 20000 Count, True RMS, Auto Range, 4.5 Digit

72-7730A

-

Tenma

72-7730A - Tenma

Digital multimeter is a 20,000 counts and 4-1/2 digits with steady operation. The meter can measure AC voltage and current, DC voltage and current, resistance, capacitance, temperature frequency, diodes, continuity, 4 to 20mA loop, Max/Min, relative mode but also has data store, data recall, AC true RMS, AC+DC, low battery display, double display backlight, automatic power off and full overload protection.

Product

General Purpose Low-side MOSFET Drivers

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas' family of low-side FET drivers are very high-speed matched dual-drivers capable of delivering peak currents of 2.0 amps into highly capacitive loads and excellent at driving large capacitive loads with minimal delay and switching times. The high-speed performance is achieved by means of a proprietary "Turbo-Driver" circuit that speeds up input stages by tapping the wider voltage swing at the output. Improved speed and drive capability are enhanced by matched rise and fall delay times. These matched delays maintain the integrity of input-to-output pulse-widths to reduce timing errors and clock skew problems. This improved performance is accompanied by a 10 fold reduction in supply currents over bipolar drivers, yet without the delay time problems commonly associated with CMOS devices. Dynamic switching losses are minimized with non-overlapped drive techniques.

Product

Digital-control DC Power Supply

IT6700 Series

-

I-TECH Electronic Co., Ltd

IT6700 Series - I-TECH Electronic Co., Ltd

IT6700 series power supplies are the most economical power supplies, they have the widest voltage and current utilization, one power supply can replace multiple power supplies, widely used in various testing occasions. With the capacity of 100W, voltage output of 60V, current output of 5A, they can control the change rates of the voltage and current automatically. The power ratio can be up to 3 times. For instance, One IT6720 can subsitute previous 60V*1.6A/32/*3A/20V*5A 3 kinds of models to save your cost.

Product

High Voltage Snubber Capacitor

STP-01RAN/STP-01RFN/STP-01RFB

-

HK Film Capacitor Ltd

STP-01RAN/STP-01RFN/STP-01RFB - HK Film Capacitor Ltd

This series of capacitors is Plastic Enclosure, Dry construction design and doesn't have leakage problem when compared with traditional Metal Enclosure Oil impregnated capacitors.Handle Medium Frequency range, high surge current, RMS current and surge voltage with temperature up to +105CCapacitance : 0.1uF - 15uF ( can be customized )Voltage range : 1,200Vdc to 17,000Vdc / 350Vrms to 6,900VrmsRMS Current - Irms : up to 100Armspeak to peak pulse current - Ipp : up to 5,900AppTemperature ranges : +85C / +105C

Product

SMD LED Aging Tester

-

Shenzhen Chuangxin Instruments Co., Ltd.

Shenzhen Chuangxin Instruments Co., Ltd.

LED life tester with 150 independent constant current to aging-life and color comparisons of 50pcs 5050 SMD LED and 100pcs 3528 SMD LED.

Product

Thermistors (Temperature Sensors, Current Control)

-

Murata Manufacturing Co., Ltd

Murata Manufacturing Co., Ltd

The resistance value changes in response to temperature changes in the ambient environment or due to heat generated by applied voltage or current.

Product

CASS Receivers And ITAs

-

Virginia Panel Corporation

Virginia Panel Corporation

The Consolidated Automated Support System (CASS) is the Navy's ATE standard for testing requirements. Designed to solve problems of unreliability, rapid obsolescence and difficult logistics support, CASS incorporates modularity and flexibility to allow expansion for testing both current and future technologies.

Product

DC Bench Power

XPF Series

-

AMETEK Programmable Power, Inc.

XPF Series - AMETEK Programmable Power, Inc.

The Sorensen XPF is a new type of bench power supply designed to meet the need for flexibility in the choice of voltage and current. Typically, the maximum voltage and maximum current are not required simultaneously. The PowerFlexTM design enables higher currents to be generated at lower voltages within an overall power limit envelope. This is achieved by using the latest switch-mode technology.

Product

High-Low Circuit Tester

29500

-

Lisle Corp.

29500 - Lisle Corp.

The low-side checks AC and DC current up to 28 volts with power on. The high-side checks spark plug wires without piercing. Complete with insulated clip.

Product

Power Switching Devices

-

Watlow Electric Manufacturing Company

Watlow Electric Manufacturing Company

Watlow solid state power switching devices complement the rapid switching required by PID temperature controllers and help deliver optimum system performance and service life. They are available in 1-phase and 3-phase/2-leg and 3-leg configurations, feature touch-safe terminations, input indicators, zero-cross, random or phase-angle fire options, ratings from 18 to 1,000 amperes and agency approvals including CE and UL® 508. Various configurations offer short circuit current ratings (SCCR) of 200,000 amperes, extensive system and heater diagnostic capabilities, heater bake out, integrated heat sinks, on-board fuses, RoHS compliance and serial communications.

Product

Broadband Power Amplifier

PAS-00210-80

-

Spanawave Corporation

PAS-00210-80 - Spanawave Corporation

* Solid State Power Amplifier* Small Signal Gain: 50 dB typ.* Rack Mount Case* Internal Cooling Fans* Type N Connectors* Over-voltage, over-current protections* Microprocessor controlled (optional)* Current monitor (optional)* Ethernet interface (optional)* Variable Gain (optional)* ALC power control (optional)

Product

Power Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Chroma’s Digital Power Meters are designed for both single-phase and multiple phase measurements of AC power signals and related parameters common to most electronic products. Instead of traditional analog measurement circuits the 66200 Digital Power Meter uses state-of-the-art DSP digitizing technology. The internal 16 bits analog/digital converters with sampling rates of up to 200KHz provide both high speed and high accuracy measurements which is unprecedented within the industry for this class of power meters current on the market.

Product

Low Leakage Triaxial Cable (0.4m / 0.8m / 1.5m / 3m / 4m)

16494A

-

Keysight Technologies

16494A - Keysight Technologies

16494A is suitable for low current applications down to the sub fA level. It supports a maximum voltage/current of 200 V / 1A DC.

Product

Integrated Current Sensors

GO series

-

LEM

GO series - LEM

*Standard package and small footprint*Cost effective*A perfect compromise for small drives, robots, solar inverters, e-bikes etc.

Product

Coating Thickness Meter for Ferrous and Non-Ferrous Materials

CM8826FN

-

Rinch Industrial Co.,Limited

CM8826FN - Rinch Industrial Co.,Limited

- Operating principle: magnetic induction/eddy current (F/NF)- Measuring range:0-1250um/0-50mil- Resolution; 0.1/1- Accuracy: 鍗?-3%n or 鍗?.5um- Min. measuring area: 6mm- Min. sample thickness: 0.3mm- Battery indicator: low battery indicator- Metric/ imperial: convertible- Power supply: 4x1.5V AAA(UM-4)battery- Auto power off- Operating conditions:0-+45閳?/span>(32閳?/span>-104閳?/span>),閳?0%RH- Dimensions: 126x65x27mm- weight: 81g(not including battery)- Optional accessories: other range 0-200um to 15000um